1 / 17
"Best" Remix: Improved Lid, Latches, Desiccant Holder, Nut, Filament Hinges, Original or TPU Gasket, Round Hygrometer, Filament Top Feed — zdjęcie 1
1 / 17

"Best" Remix: Improved Lid, Latches, Desiccant Holder, Nut, Filament Hinges, Original or TPU Gasket, Round Hygrometer, Filament Top Feed

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Improvements to an already great design. IMHO, these are easier to print, more functional, save money, more options.

Ocena
4,923 / 5
Polubienia
162
Pobrania
984
Wydruki
15
Wyświetlenia
3039
Oceny
13

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
GNU General Public License v2.0

The original design is good. However, I am an engineer so I designed a few improvements for the design (make it more functional, less filament, repairable, etc) and saw several people in the original and remix comments had some good ideas or issues so I incorporated their ideas and fixes for their issues as well. I have a parts list below but will begin by describing the improvements I made. All of these improvements have been printed, tested, and verified by many users and myself.

Quick Description of the improvements (go all the way to the bottom for even more details on the improvements if you enjoy reading or really want to know more)

Improved Lid = Replaceable Clasps using 1.75mm filament hinges, Improved Desiccant Holder, Slightly Less Volume, Original Gasket Option, Flat Head Holes to Make the Rewinder Support Arms Replaceable (I go into all of these improvements in

TPU Gasket = print this instead of buying and using 3mm foam seal material for that version of the lid. See details below for printing tips and more info.

Improved Clasps / Latches = use 1.75mm for hinges so replaceable and can print in different colors, print vertically so much stronger, rounded edges of hook so installs and uninstalls more easily while providing the same seal strength, added a handle to the end to make it easier to disengage the latch from the container (people really like this feature, it makes a big difference)

Improved Desiccant Holder = Uses less filament, more secure fit, more yet smaller air holes for more air and so smaller desiccant pieces don't fall out

Improved Rewinder Nut = added clearance the original was missing, so it installs smoothly without being too tight or too loose.

Round Hygrometer Adapter = allows the use of round hygrometers with the lid

Simple filament tag/label seen in the photos = No multi-color required. No holder required (uses exisiting design. If you like it / want to print one, you can find it here: 

Experiments (in their own folder): More secure Rewinder (modified pin and support arms, some users were having an issue with the rewinders falling out so this fixes that) and improved longer clasps (in case you have a really difficult time removing your clasps when the lid is installed on the cereal box container). These have all been printed and tested by others and/or myself so print them if you think they are useful. Descriptions are in the Files tab. Also added another filament feed option that goes through the top of the lid, instead of the side, which makes it more compatible with printers like the Centauri Carbon 2 and Snapmaker U1. This means that you will need two sets of tpu parts per lid but gives you the option of side or top feed for the filament out of the lid.

I only uploaded the parts that I changed. Please get the rest of the original files from the original design.

Printing tips: Print clasps so hole is vertical (best for strength). No supports needed for any of these.

If you have any other ideas for improvements, please add that in the comments and I will try to incorporate them. Thank you and thanks to @GunplaMark for making such a great original design. I am only attempting to polish and tweak his great effort to better suit my desires/needs and maybe some others will appreciate those changes as well.

Also, if you actually read all of this, print this remix, and/or appreciate this remix, it would be awesome to hear from you in the comments or give it a like. That is what inspires me to create and share more remixes. 

=========================================================================

The parts I personally use:

=========================================================================

Improved Lid full Details

  • Clasps now use 1.75mm filament as hinge: This is great because clasps can now be printed separately (can print in different color, print vertically for better strength). This also uses less filament and improves the chances of a fully functional print (print in place hinges can be difficult if you do not have a well calibrated machine). Then if a hinge or clasp ever breaks, it is easy to replace with this design. 

  • Tested and works great => Using the 1.75 filament as a hinge works great for this design. I am using PETG filament for all the hinges on 4 of my boxes right now and they all hinge smoothly and still allow the clasps to clamp strongly to the container for a great seal.

  • Since volume is reduced slightly, save filament and print time.

  • Also modified the lid's retainers for the desiccant Holder to make them easier to print and less likely to break when removing the desiccant Holder from the lid. Did this by using a chamfer instead of lip for the bottom of the retainer. I removed one of my desiccant holders 20 times in a row to verify this.

  • Added small holes on both sides of where the rewinder support arms attach to the lid. These 4 holes allow you use to use a flat head screw driver to disengage the support arms and remove them in case one breaks or you want to change that part for a different color or design.

  • There are two versions of the lid: One that uses the 3mm round foam strip from the GunplaMark's original design and one version that uses the original rubber gasket that came with the cereal boxes (8mm x ~3.4mm). Both models are clearly identified in the files section. Besides the different gaskets, both files have the same features. I would recommend printing the original rubber gasket one if you have not already bought the 3mm foam seal listed in GunplaMark's original design (I also included the one I used below). Reusing the gasket from the original cereal box lid means less waste and you save money by not having to buy an additional item (the 3mm seal from the original design). Also, the original gasket version uses slightly less filament so yay!

TPU Gasket Details:

  • TPU Gasket is designed to replace the 3mm foam seal material called for in the original design. I did get this idea from another user (see linked remix) but created a new design to better match the shape, make it easier to print and insert, and provide a better seal based on my compression measurements. It works really well. To print this, just do 1 vertical walls and 2 top and bottom surfaces with no infill. This means there will be 0.4mm walls all around and a empty space in the middle. For best success at printing the top surface without infill, make sure to adjust the top surface infill direction so it travels the shortest direction possible more the outer wall to the inner wall all the way around the top. To do this, I set my main model to 135 deg infill direction then added a modifier to two of the corners to change the top surface fill direction to 45 deg and this is the result. This TPU gasket perfectly matches the opening of the lid, has 0.2mm chamfers on top and bottom edges to make it easier insert and to make printer tolerances less of a concern, and is 2.6mm tall because it will compress to 2.4mm when the lid is applied, which is how much the original 3mm seal material compresses when the lid is applied, so this ensures that same quality of seal.

Improved Desiccant Holder Details:

  • The original design used more filament than necessary so I reduced the amount of plastic required while also increasing the volume slightly.

  • I changed the vent holes on the ends because some silica beads (certain brands) are small enough to get through the holes in the original design (experienced this and saw it also in the comments). I fixed this in the new design and made it easier to print.

  • More air holes: I added more air holes to the bottom so I can stick them straight in my filament dryer to dry out the desiccant and they will be able to vent from all sides. This also uses less filament than the original design.

  • More secure fit: The original design only had two lips to hold the desiccant lid on the box. On my new v2 remix, I changed them to clasps and added two to the sides as well, so there are 4 in total and much more engagement/contact area. This makes the desiccant Holder fit very securely together without using as much filament as the original.

  • This improved desiccant Holder is compatible with the original design (I verified this).

Improved Rewinder Nut Details:

  • The original design did not have any clearance for the threads so it was very difficult to install. Some users just tweaked settings in their slicer to add xy hole clearance to correct this but I remixed the nut to add a slight amount clearance for the nut so it will install smoothly without being too tight or too loose. I originally fixed in slicer, but then decided to make a more permanent solution for others, saw someone did a remix for this (linked it here), but I still wanted to make my own version of it for fun/practice and it works great.

Round Hygrometer Adapter Details

  • Some of my hygrometers are round and had FOMO, so I made an adapter that fits securely in the original design to hold round hygrometers so I don't have to buy more rectangle ones. I saw someone else had a remix for this (linked in the description) but I designed my own to add two cutouts for the two keys that are on the sides of most hygrometers for a more secure fit.

Tagi