Liczymy pasujące modele…
Box for storing 1 kg or 2 kg spools of filament with four silica gel reservoirs. Printed from PETG Accessories: Round thermometer + hydrometer Magnet Ø5x3 - 16 pieces ISO 14579 or DIN 912 - M3x10 - 12 pieces DIN 562 - M3 - 12 pieces…
I made this model from scratch taking a lot of inspiration from the original. I wanted to print as many parts as possible myself to avoid hassle with metal rods, screws, etc. I needed small form factor as I have limited space available. I…
Needed 7 filament guides instead of the regular 6. Rather than making a fixed set, I opted for a dovetail rail with separate guides, so I could print as many as I need while still being able to adjust back to 6 or other number later…
Box for storing 1 kg or 2 kg spools of filament with silica gel reservoirs. Printed on MK4
The Shark filament dry box system has been through many iterations, and is finally at a a stage I'd say is “finished”. It's named because of the shark fin shaped filament guide that makes it possible to load filament easily. The main…
Heat or glue here as it will pull out if left in place.
!! This is only an axle part. because I remixed two projects that have incompatible licenses I can't publish them in one model. Get the axle here To make your drybox convertible to use 2kg spools take a look at my other model: Here you…
Updated (v2) - the first 2 photos show the original v1 model, and show how the buffer weight puts too much curve on the PTFE tubes to the MMU3. Changes in v2: Angled the buffer mount so that the buffer-to-MMU3 PTFE tubes are vertical as…
This remix adds an autorewind spoolholder INSIDE the standalone Drybox. You can then throw away the buffer that comes with the Prusa MMu module. I wanted the original “standalone Drybox with humidity sensor" to support a parametric…
Custom roll holder for using M3x10 screws and nuts. The screws and nuts are completely countersunk.
Description Created a set of ‘fins’ and baseplate with clamps to hold desiccant at the bottom of cereal box dryboxes. The idea is to have it lifted up to get close to the spool with separation between them to allow for better airflow.…
When you're tired of dry box mounted at back. Usable for both sides, but on right side fan could complicate drilling and mounting. Maybe you needn't take off side fan, I moved bolts higher then on photos. But drill holes for them…
This is a center axle bracket that uses the existing bearing holder and axle. I added two different diameter axels to use for spools with larger or smaller center holes. Print Axels with supports as they are at a 30-degree angle to make…
This Coupler Hole Jig is an enhanced version of the coupler hole jig provided with @GunplaMark 's outstanding Ultimate Cereal Container Filament Drybox . It provides a more precise drilling location for the coupler than the original…
This Auto-Rewinder for Ultimate Filament Drybox combines modified versions of parts from several filament spool auto-rewinder models to provide automatic filament spool rewinding in @GunplaMark 's outstanding The Ultimate Cereal Container…
These Saddles (regular and short versions) replace the rollers in @GunplaMark 's The Ultimate Cereal Container Filament Drybox - Official Remix to work with my Auto-Rewinder for Ultimate Filament Drybox to eliminate problems with tangled…
UPDATE April 24, 2026: I have published the third generation of my Coupler Cap for Cereal Container Drybox as Filament-Holding Drybox Cap . The new Gen 3 version grips the filament very firmly , and it has much smoother operation than…
Uses the plug circled in red to connect to the m-2j1r. The power supply can output 3v 3amps which is the requirement to operate from rosahl. You can find it here: https://www.amazon.com/dp/B07N18XN84?ref=ppx_yo2ov_dt_b_fed_asin_title…
This is a ¼" version of the a model by @mixon, which is a 45 degree version of the "Drybox filament guide using PTFE tube" made by @mp42, available for OD4mm and OD3mm PTFE tube. If the inside diameter of the fitting is too tight, it may…
Originally printed the Drybox from Prusa Guy but the first Prusament spool I inserted was due to some production fail 2 mm wider and could not fit in. So tried the mod from DG-RoboTek that gave me the extra milimeters but already during…
Main body is printed with PLA Gaskets are made with Fiberlogy 30D TPU.(I didn't test it with harder TPU) Takes around 750g of filament to print. Hardware needed is 2x606 bearings, hygrometer, 4x M3x8mm bolts, 4xM3 heatset inserts and M10…
I created this modular holder for GunplaMark's Ultimate Cereal Filament Drybox, because I never liked the hygrometer hanging on top of the filament exit port (unstable angle against gravity). Instead, this mod allows to put some…
I wanted cheaper parts that I could easily source where I am, and modifying parts where necessary based on my experience putting it together. I am not using all parts used in the original, just the basics. Printed on Prusa Core One with:…
my take on Drybox connector with swivel function i will include few formats.Edit for personal use if necessary. u need to print 5 parts and u need to buy 2x = PC4-M6x1 connectors. Its best to print it with 0.1 layer 4 walls 4 tops 4…
***IMPORTANT*** !!! There is also a free version of this model available !!! Purchase this model only as a thank you if You enjoy this design and find it useful! Free model Introduction There exist many different designs to use standard…
These Mounting brackets currently fit on either side of the FlashForge 5MPro. They slide onto my Dry Box Base Bracket Stand I will try to design a Roller that doesn't require a drybox in the near future. There are 2 versions. Regular…
This is a hack for using AON3D M2+ style dryboxes that were originally designed for vertical hang mounting (don't ask...) With a slight offset too their central post you couldn't use them any other way until now! Behold! Now with just two…
The dry box for your Flashforge AD5X can be downloaded from here: https://wiki.flashforge.com/en/ad5x/dry_boxes This is the o-ring mentioned in the installation guide, but the kit isn't available at the moment. Printed from TPU it's a…
This Improved Coupler Nut is a remix of the Coupler Nut from @GunplaMark 's The Ultimate Cereal Container Filament Drybox that now includes PC4-M10 Threads and a Flange for a perfect, secure fit with the PC4-M10 PTFE tube coupler. I used…
The original is a good idea, just does not work with the big headed hot end on the MK4S, unless you push the printer way back in the enclosure, with this design you do not need to do that and the front of the printer can touch the…
Alternative spool hub that to be used with 608 bearings on GMagican's Drybox IKEA 365+ 10.6l Spoolholder with spacers
For my hygrometer to fit in the silica gel container I had to extend the slot to 46x27mm.
A mounting slide for GunplaMark's Ultimate Cereal Container Filament Drybox that mounts onto openGrid using openConnect. Print with the large flat face on the bed - doesn't need any supports. I'm using these with 2x…
A hanger rail for fixing a filament drybox to a ceiling. I am using the rail to fix the filament drybox to a plank of the shelve that my 3D printer is located in to allow printing from the drybox. The files include the minimal design of…
Update 11 FEB 2026:I have added a version of the base that accepts 5mm metal axles. The holes are snug enough that the axles will stay in place with just friction, but if you use 4mmID tubing you can also tap the ends for either #8 or…
This is a tool that allows rewinding of filament spool without opening the drybox at all. Required items 6 or 9 magnets (18*3mm) to be placed in the rewinder handle. 3 magnets (18*3mm) to be placed in an adapter, for each of your spools.…
Vrchní a spodní část je spojena v pantu 2 šroubky M3x20. Ukotvení je dělané na 2 šrouby M5x, . V okýnku použita fólie z laminovačky a spoj je lepený z přední části. Vývod vytvořen tak, aby se do něj dala zalepit PTFE trubička (u nás…
This project allows you to convert standard cereal storage containers into practical filament dryboxes. The printed side mounts are screwed togheter through the container wall and support a Ø20 mm axle, allowing the filament spool to…
For this filament spool holder, I wanted to avoid using ball bearings because I did not have any at home. Honestly, using bearings for this purpose would also be a bit of overkill. Another goal was to fit the widest possible spools. In…
Was having some issues with trying to side-feed my filament into the MK4s. Even with a filament guide it would pull on the drybox sometimes and move it around. Made this so the filament still feeds from the location the printer was…
Modeling a cap for PC4M6 to avoid having to open my dry boxes to get the filament. And, of course, prevent moisture from entering. It must be printed in TPU to benefit from its elasticity. It fits PC4M6 of this type: Depending on…
Adapter to place the Hygrometer into the Lid, including PTFE outlet
I have been using the Sistema Klip It Plus 3.5l boxes for spool storage, and am starting to convert them to dryboxes. This is a system that allows easy filament spool swaps from the large top lid without requiring an exact fit to the box…
Uses standard MM3 collets (E3D heatsink collet)
There are two additional slots (with dot markings) that can be used to run guides for 2kg spools
The arrow on the model should point towards the printer front. There are two positions. One where both front and back bolt fit into the sockets and PTFE can be routed through the back of the box and top-back hole of the enclosure. And a…
!! This is only an axle part. because I remixed two projects that have incompatible licenses I can't publish them in one model. Get the drum here To make your drybox convertible to use 2kg spools take a look at my other model: Here you…
This is the rewinder part of the project published here: https://www.printables.com/model/192366-drybox-ikea-365-106l-autorewind-and-not-spoolholde to assemble it please look at source project
A simple finger wrench to hold M3 Nyloc nuts. Install the nut in the socket and then use the groovy piece lengthwise between the fingers to hold the nut in place while engaging the bolt. The ring can then be used to grip the nut while…
I made this adapter to fit these together for filament drybox / storage: drybox link: https://www.amazon.com/dp/B0F8B8C9Q6 hygrometer link: https://www.amazon.com/dp/B0CHF98P26 These have been holding at 10% for several weeks so I'm happy…
One of the biggest drawbacks of the CC2 is its open spool mount design. While the community has already created some great solutions, I felt there was room for a more modular approach; one that doesn’t rely heavily on additional…
Wanted to keep using the (un)original drybox with the auto rewind on my core one until the INDX is out. Printed modified mounts that attach to the top sides of the Core One using six M3-35's and six M3nN (locknuts). The model will just…
THIS IS MY DESIGN PORTED FROM THINGIVERSE This design was created in 2018. Now there are much better designs. Keep that in mind. I designed a filament drybox to keep filament dry and clean. So far it hold up to 5 filament spool each 1 kg.…
With this Container you can remove the silica gel very easy to dry it. You just need 2xM3 bolts that screw directly into the plastic. The length should be anywhere between 5 and 30mm i recommend 8mm.
This is a simple remix of the rollers so that you can use M5 x 60mm screws and an M5 nylock. I made so that you can use an 8mm allen key on the nut side roller to help screw it together Dont't forget to print the rest of Chwiede's dry…
Requires: 2x voron style M3 5mm dia 4mm long heatset inserts 2x m3 x 8mm screws, head style isn't too important, BHCS or SHCS work well. Don't use countersunk screws. There is a drilling guide so you don't have to reprint the boxes, just…
Edit : If you want to print this drybox, wait a few days, I'm finalizing an other version where silica gel don't go under the bottom part, and that support larger spool. I had a few problems with those from Overture that are slightly…
These drybox holders can replace the 2 lower spool holders on the Elegoo Centauri Carbon 2. Theyre meant for common dryboxes with base measurements of about 230 x 100mm or less. You can use the last photo in the gallery to do an image…
Curved Hygrometer Holder for Modular Cereal Box Drybox A hygrometer holder for the Modular Cereal Box Drybox by joncruz that actually looks like it belongs there. Why another hygrometer holder? The existing holder by charno works, but its…
A set of caps for the original lid of the popular cereal boxes with a hexagon on the lid. The caps include a compartment for a small piece of sponge to act as a dust filter and are designed for PC4-M10 fittings. The threads shouldn't…
Modified F1 & F2 Beam 5 with angeled exits PC4-M10 and no passthrough on bottom. My drybox sit on the shelf above my printer so I relocated front exits to reduce friction and better operability
I've created this remix with PrusaSlicer to close the hole created for this fitting.
I made a desiccant holder for the USS drybox that has more gaps for ventilation and no branding. So if you like simplicity and practicality- this is the perfect model for you.
These are 3d printed rods for replacing the M8 threaded rods needed for this IKEA drybox model: It prints alright vertically in a core-xy printer - even though it already flexes around on top. Use a brim for adhesion. Bed slingers…
Diese neue Version 2026 habe ich im Laufe der letzten Jahre weiter verfeinert und optimiert. Hier stelle ich nun euch die neuste Version vor, um einen besseren Gebrauch zu erreichen. Die Prusament 2 kg Welle kann auch für breitere…
Keep your workspace clean and your filament dry with this custom-designed, low-profile mounting tray for the Elegoo Centauri Carbon (CC2). This modular system is engineered to securely hold four standard "cereal container" style filament…
The files are: Silicagel container/bottle for Prusa USS Drybox screwable cap measuting cap (size of container) funel (to fill the container) Regeneration Print in PLA or PETG if you take out for regeneration. Print with adapted heat proof…
Small printed part that together with PTFE tubes, reduces the friction of a cardboard spool that is inside a USS Drybox while it's laying flat. Although the Drybox is best placed vertically, there will be some setups where stacking the…
Once you installed the drybox puck and the original 1kg spoolholder, you cannot use 2kg spools any more. With this adapter you can mount them.
I've bought an USS Drybox expecting that I could print the label with the filament inserted to use it as sample, but the smoked plastic is too dark so you cannot see very well throught it, so I've designed this sample to be attached to…
I did not have the long hex nut required to assemble the MK adapter, so I instead remixed it using M3 heat set inserts. The heat set used has a height of 4mm and outer diameter of 5mm ( Aliexpress Link ). The Fusion 360 file is also…
I've bought an USS Drybox expecting that I could print the label with the filament inserted to use it as sample, but the smoked plastic is too dark so you cannot see very well throught it, so I've designed this sample to be attached to…
I modified Timetraveler's idea and drafted a sleeve for the inside of the USS Drybox to center my primary non-Prusa spools (Jessie and Polymaker) for better performance with these new dryboxes. Without the sleeve, these spools will rub on…
These are dual-purpose adapter sleeves that allow you to use third-party filament spools in your Prusa USS Drybox without them dragging on their rim, and allow you to mount Prusa's OpenPrintTag NFC tags on difficult spools that are the…
Bushing to make Fiberon spools fit and spin free in the USS drybox. I printed it in PETG but any material will do. The dimensions are inside 52mm outside 54,8mm length 70mm. A freecad file is included to modify if you want. Check here for…
TLDR: Everything you need to build a filament Drybox for 3D printing and/or storage - with a built-in Auto-Rewinder! This Phil's Auto-Rewind Drybox Collection project combines my new designs as well as my remixes of the other referenced…
The pruse enclosure has on the center of the top a rectangcular hole (55x10mm). This add-on guides the tube inside. 4.6.2026: File updated. Tube sticks better in hole because of additional curve.
I love the simple but very effective design of the origional model. Easy and simple to print. However I want to be able to see the color changing silica jel inside to know the current status of it. So I made a remix with a cutout for…
It is only intended for storing the filament and not for printing out of the box. I printed it with an MK4S 0.4 nozzle and used the settings below: Generic PETG 0.20mm SPEED support on build plate only organic support style I used the…
This is a different take on spool centering spacers for USS Drybox than Timetraveler's model . I was aiming for something smaller than a full cylinder. You need a pair of these sleeves for the spool to sit properly. For some spools, the…
This simple and easy to print screwdriver will help you for installing and removing you USS drybox.
Print with posts away from bed. Used PETG for body, and PLA for supports (easy breakaway). Post are slightly smaller than the Puck's holes. Posts are 3mm long
Fully 3D printable spool holder acting as a universal adapter. It allows the use of the USS Drybox and the original spool holder system from the new Prusa Core One+ / L on Prusa MK series printers (MK3S+, MK4). An ideal solution for…
Lack of support for true believers, who bought all parts individually when they released and have not waited for years for the final version is shamefull. Why MMU support is not part of the released files is beyond me. This remix fixes…
USS Drybox Split-Tag (Modular ID & Material System) This is a functional remix of the USS Drybox label, redesigned for more flexible and efficient filament management. I created this version because I wanted a numbering system for use…
I drew this in about an hour. It's a simple box that uses gyroid infill to retain a lot of silica for my 20l dryboxes. The short boxes hold ~260g and you can fit 2 on each side, for a total of 4. I'm running these one per drybox right now…
After purchasing the USS drybox, I found that handling the universal spool holder was not entirely comfortable for my hands, so I enlarged its front part and added inscriptions...After this change, I find the handling more comfortable.
I like Ikea 365+ box because it's sealed but I also like autorewinders for MMU2, then here is my mashup. Up to 2 spools, max 63mm width, can be used simultaneously and if no springs are used into hub...this can be used as a normal spool…
I didn't like any of the existing MK3S-mounted dryboxes so I designed my own - fully printed and less ugly. You can optionally connect a 4mm PTFE tube for to protect the filament between drybox and extruder. For MK3S+, I recommend my…
UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…
Made a filament sensor bracket so I can use my dryer box with the printer using M10 fitting. Added Supports arms to keep runout sensor in align. solve problem sensor would easily twist and turn and put filament in a bind. Print…
Hello, I would like to present my version of the dry box. I was inspired by this model: Link to the model In all the boxes I've seen so far, the spools are upright. This bothered me a lot, so I came up with a horizontal variant. The box…
“New and improved” hygrometer holder to fit containers with a narrowing / groove. To make it more fun, I added a lable for the filament type. This is useful if you print mainly in the same colors but different filaments. Use manual color…
I wanted to have a passtrough for the DryBox and add a nut holder for the middle screws. I used Passthrough_Cover.stl for the hole dimensions to get the fit just right. From the other files I got the dimensions for positions of holes and…
A remix of rynn's humidity sensor mount adapted for 8x2mm magnets. Magnets are also not captive in this version.
Lagers (608ZZ) : https://www.amazon.nl/kogellagers-shielded-miniatuur-groefkogellagers-skateboard/dp/B07S3SZZST/ref=sr_1_12?keywords=lagers+608zz&qid=1707056953&sr=8-12 PTFE tube :…
Filament racks for the Ikea samla 22l box, made for 20 mm PVC or any other pipe. they raise the Filament spool of the bottom so there is space for enough Silicagel. i used PLA and PETG to print them, but most materials will work.
I originally wanted a 2kg spool version of the Spannerhands spool holder. After editing the original stls, I noticed that due to the increased dimensions the print was sagging. Therefore I rebuilt the original design, increasing stiffness…
![Jumbo Integrated Rewinder for 2kg Spools for (un)original Drybox [Drum Only]](https://media.printables.com/media/prints/1128144/images/8513432_593bb1d6-475e-4ace-b06c-6081c0e5e862_75880e9b-7293-4a97-97bb-4398e19ca6ce/img_1127.png)
![Jumbo Integrated Rewinder for 2kg Spools for (un)original Drybox [Axle Only]](https://media.printables.com/media/prints/9b94fa80-08b5-423e-ad2c-89cdd3e5c2c8/images/12163571_8aa253c3-eb78-4b9f-acf9-2fb2e49b2fdf_5eed7645-cee6-44da-a4d4-c8d4e8799df2/img_1127.webp)
