#0022 [Remix] Spool Holder and Drybox for Enclosure V2 - with alternate filament exit ports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This version has alternate filament exit ports
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 465
- Wydruki
- 1
- Wyświetlenia
- 2626
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I like this drybox, except I find that the slit for filament exit opens up the drybox too much to the environment and reduces the life/duration of the desiccant - and it stops working and needs to be renewed (the RH rises back to match the environment). So I've made a simple change to help address this issue.
- closed the port on the base half where the slit is attached.
- eliminated one 3D printed part and 2 screws necessary for this box to work.
- included 2 versions of alternate exit ports for a PC4-M6 push connect fitting: one where the exit is on the lid, one where the exit is on the base. Take your pick.
- You can find the PC4-M6 here: https://smile.amazon.com/gp/product/B091CYNJX5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I've made no other changes.
For the remaining parts for this drybox, you can check out the original design referenced in the remix section.
I had success printing it in PLA, 0.2mm layer thickness. No supports.
If you like this model and/or add it to your collection, please click the LIKE button and give it some STARS!
Also please post a make as I would enjoy seeing you get good use out of it - it would make my day! :-D
Happy printing!