1 / 4
Silica Gel container for drybox — zdjęcie 1
1 / 4

Silica Gel container for drybox

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Box for silica gel beads to put in a filament drybox. The lid has holes in to expose the beads to air but stops spills.

Ocena
5 / 5
Polubienia
34
Pobrania
256
Wydruki
3
Wyświetlenia
1549
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

To keep my filament dry I use a set of dryboxes. Each box has this container in it. I wanted a way to keep the silica gel beads from jumping around and sticking to the spools but still be able to contact the air as much as possible. There's no latch on the lid, this container is really only to prevent stray beads from jumping out when handling the box. The bottom of the box is also rounded so beads don't get stuck in the corners. 

I implemented the hexagonal holes in the slicer instead of in Fusion because the prints look better that way. I do have an STL with the holes included that I can put online if people want it. That model is visible in the cover picture. 

Optional: paper cover

You can install a small piece of cloth on the lid to completely stop the beads from escaping like this: 

I used a thin transparent piece of paper that covered  my tablet to prevent scratches when I unboxed it. 

Printing instructions

You can  use any material and layer height you want but to shorten print time I recommend 0.2mm or bigger.

Tagi