Silica Gel container for drybox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Box for silica gel beads to put in a filament drybox. The lid has holes in to expose the beads to air but stops spills.
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 256
- Makes
- 3
- Views
- 1,549
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
To keep my filament dry I use a set of dryboxes. Each box has this container in it. I wanted a way to keep the silica gel beads from jumping around and sticking to the spools but still be able to contact the air as much as possible. There's no latch on the lid, this container is really only to prevent stray beads from jumping out when handling the box. The bottom of the box is also rounded so beads don't get stuck in the corners.
I implemented the hexagonal holes in the slicer instead of in Fusion because the prints look better that way. I do have an STL with the holes included that I can put online if people want it. That model is visible in the cover picture.
Optional: paper cover
You can install a small piece of cloth on the lid to completely stop the beads from escaping like this:

I used a thin transparent piece of paper that covered my tablet to prevent scratches when I unboxed it.
Printing instructions
You can use any material and layer height you want but to shorten print time I recommend 0.2mm or bigger.
