PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to use the Prusa Dryboxes with a PTFE-Tubing clamp instead of the plastic-flap gap that the dryboxes…
- Ocena
- 4,933 / 5
- Polubienia
- 156
- Pobrania
- 1034
- Wydruki
- 10
- Wyświetlenia
- 8394
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to use the Prusa Dryboxes with a PTFE-Tubing clamp instead of the plastic-flap gap that the dryboxes currently use.
You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3 8mm screws work perfectly for me.)
This piece is threaded for PC4-M10 quick-fittings for 4mm PTFE tubing (same stuff the prusa mk3s and most other printers use)
Here are a couple links of where you can get them, but you might want to search around in case these aren't the cheapest options anymore:
https://smile.amazon.com/dp/B01KHN1HWY/
https://www.aliexpress.com/item/32866539665.html?spm=a2g0s.9042311.0.0.27424c4dDgiAG6
The gap that the filament goes through in the box is a little too narrow to fit PTFE tubing through, so you will need to use a drill to widen the correct spot a little.
To do this, attach this printed piece to the front of your box, and use the hole to line up where you drill into the box.
To view or edit the Fusion360 File, you can access it here:
https://a360.co/2V7BVta
Print instructions
No supports needed! I used PLA.