1 / 6
Drybox IKEA 10.6L MIX
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Best of IKEA Drybox, borrowed from here and there
- Ocena
- 5 / 5
- Polubienia
- 96
- Pobrania
- 545
- Wydruki
- 8
- Wyświetlenia
- 3308
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 8) (Komentarze: 13)Remiksy (0)Kolekcje (207)Powiązane
I wanted the silica gel container from one design and the adjustable dual spool holder from the other, so I mixed the two excellent designs linked below.
Modifications
- Modified the silica gel container to be the spacer for the spool holder on both sides, so I made it shorter.
- Added small holes to the container to allow more airflow to the silica gel.
- Cut of the spacer from the spool holder middle part (barbaric way, sorry)
- Designed the required "rod" for the spool holder, so you doesn't have to buy it (not an easy task, as it has to be a hair less than 8 mm in diameter)
The hygrometer case can be used as a handle to lift the container if left unpopulated :)
Printing
Printed everything except the cap (linked below) in PLA. The containers without supports, but the single (outer) spool holders with support. See the attached 3mf files.
Recommended accessories
- Fitting: https://www.printables.com/model/109402-drybox-filament-guide-using-ptfe-tube
- Cap: https://www.printables.com/model/80801-ptfe-tube-cap-with-filament-holder
Credits and more info
See the links in the Model origin table below.