1 / 4
Creality Space Pi Desiccant (Silica Gel) Dry Basket — zdjęcie 1
1 / 4

Creality Space Pi Desiccant (Silica Gel) Dry Basket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Basket to dry desiccant / silica gel in the Creality Space Pi filament dryer – please read the printing tips!

Ocena
4,867 / 5
Polubienia
215
Pobrania
1361
Wydruki
23
Wyświetlenia
8445
Oceny
15

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

I stopped uploading and updating my models here at Printables!

My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …

The basket fits exactly into the Creality Space Pi filament dryer.

Simply dry your desiccant / silica gel at 70°C for a few hours, stir from time to time.

The holes/slots are 0.8mm wide.

You may want to use OndraM's Air Vent Gap Spacer to increase the drying time …

 

Printing Tips (!)

This model is quite difficult to print, but therefore you don't have to assemble parts. 

It's mandatory to use a high temperature filament like ABS, ASA, PC or similar! 
PETG and PLA will deform.

Take care of slow printing, especially the overhangs and bridges. 

I used 100% part fan for the overhangs and bridges.

A large brim (!) will help to prevent warping. 

100% concentric infill will give a bit more stability.

The wall generator “Arachne” has problems with the bridges, use “Classic” instead.

ASA worked better for me than ABS. 

No supports needed. 

I uploaded a .3mf file with my settings.

Tagi