Liczymy pasujące modele…
This Silica Box is for the AMS Hydra Mod , but it also works perfectly with the standard AMS. It fits perfectly and the volume is larger than in other versions. There are also versions that support a Hygrometer. This is the Hygrometer I…
the missing files can be found in the original model
Prints flat. Note the top vs bottom clips. Holes on back for magnets to glue in. Tinkercad linke:…
Box for storing 1 kg or 2 kg spools of filament with four silica gel reservoirs. Printed from PETG Accessories: Round thermometer + hydrometer Magnet Ø5x3 - 16 pieces ISO 14579 or DIN 912 - M3x10 - 12 pieces DIN 562 - M3 - 12 pieces…
The cheese making mat is ideal for small scale cheese making. This cheese draining ripening mat is always handy to have some in the kitchen of a home cheese maker.. The cheese drain mat can used for placing under soft cheese while aging.…
Corner bottle dryer for a corner sink. The bars width are 60mm (left) and 70mm (right). Please adjust to match your sink! Mine has a weired joint in the back thats why there is a whole in the model. Main part: Printed standing with tree…
When I tried to use the supplied axle with my PolyDryer on a roll of Sunlu ABS with a broken ring, I found the spool wasn't lifted enough to avoid the bottom rollers. About that time I saw the One-Way Check Valve video from @clough42 and…
I made this model from scratch taking a lot of inspiration from the original. I wanted to print as many parts as possible myself to avoid hassle with metal rods, screws, etc. I needed small form factor as I have limited space available. I…
Credit on Printables to: @ IDVx Consulting @ GunplaMark I have remixed and simplified the prior designs above: Revised the filament exit Revised the base and rollers to be one piece with integral desiccant bin. Left off the hydrometer and…
This Sencor SFD 851GR Spare Drying Tray contains two parts, so you can use just the frame and make a space for filament with it. The model is bigger, so you will need bigger printer.
Insert to convert the Utopia Cereal Containers (with indentations) into a filament dry box. Desiccant box prints separately and snaps into place (so it can be swapped out or dried separately).
Remix to fit these cheap aliexpress bluetooth sensors
I've redesigned pfte bracket with fittings I have at home.
This bushing prevents the bowdentube from being pulled into the dryer box when filament is being pulled by the extruder. Printed in TPU.
Needed 7 filament guides instead of the regular 6. Rather than making a fixed set, I opted for a dovetail rail with separate guides, so I could print as many as I need while still being able to adjust back to 6 or other number later…
In the MMU3 buffer, the filaments are exposed to humid room air and dust. Moisture can lead to bad prints and dust can clog the nozzle. Inspired by Filament Dry box cheap and simple von werner_rh | Kostenloses STL-Modell herunterladen |…
UPDATE December 14, 2025: I added some thrust washers. These are there to keep the Swirly-Hub-Things™ from jamming against the legs. Ask me how I know we need this! UPDATE December 9, 2024: I modified the Onshape project to make the the…
Same instructions as the original model. https://www.printables.com/model/1036595-python-ams-enclosure-polydryer-mount/files @Zanfar gets all of the credit. I was just wanting to upload the 3MF.
I found that after using my water bladder in my hydration pack that it remained wet inside for an extended period of time. I tried a few of the inserts that hold the bladder open but it still remained wet after many days. This print uses…
The generic purpose of this tray system is to regenerate silica gel with indicator, after losing its absorption capacity, in a Creality Space Pi Filament Dryer or in a Creality Filament Dry Box 2.0 (this was suggested and modified by…
I used this to hold a swinging frame to the wall. I glued an 8-mm neodymium magnet in the back side and screwed it into a drilled hole in the drywall.
печать из материала ABS или PETG @сопло 0,4 мм you will need 2 bolts and 2 nuts, which are best soldered
A part that joins the frame sections of a dring rack. The frame rods are approximately 6mm diameter. I printed in PLA but other matrials may suit, even a stiff flex material might work. Print with the top down, basically legs pointing up.
This is a quick practical print solution to a problem I was having. My partner loves these flexible laundry baskets, but we find that after some use, the handles often split, making them difficult to carry around. We didn't want to buy…
Box for storing 1 kg or 2 kg spools of filament with silica gel reservoirs. Printed on MK4
The Shark filament dry box system has been through many iterations, and is finally at a a stage I'd say is “finished”. It's named because of the shark fin shaped filament guide that makes it possible to load filament easily. The main…
Heat or glue here as it will pull out if left in place.
A plug to replace the existing ones. This one has no hole for a PTFE tube nor the filament. It works well in TPU.
This is a stand for Pica Dry pens and box of refill leads. The box has 2 mounting holes at the back for mounting it to a vertical surface. There are two holes at the bottom for 6x2mm magnets too, if you want to mount it to a (horizontal)…
!! This is only an axle part. because I remixed two projects that have incompatible licenses I can't publish them in one model. Get the axle here To make your drybox convertible to use 2kg spools take a look at my other model: Here you…
I couldn't really find any Sunlu S1 holder for my MK4S, so I designed my own with some help from the model from: Dion Christensen The dryer sits flat, so there shouldn't be any issues with the filament rolling in the dryer. I've made 2…
NOTE: Please take care to ensure that you match the download to your version of the box. We have seen at least two versions; one sold in 2024 until early 2025, and one sold from 2025, that is still as far as I know, current. Hygrometer…
Stackable Drying Box 110x110x40mm 110x220x40mm Honeycomb Style Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this…
I designed the enclosure after watching a video from 3D Printing Ideas showing tests with a filament box. The brackets inside are for two 40 mm fans tilted by 5° to circulate air around the top of the silica gel and move the moisture in…
Simple modification du modèle de Stanley (lui-même remix de l'excellent modèle de hexvolt ) afin de faciliter l'impression, sans support. Imprimé en PETG transparent pour visualiser la couleur des billes de silice. Print instructions: 4…
These models allow you to cover up a 2.5" diameter hole saw hole in drywall. They have an opening for routing cables through the hole.. There are two variants, for 5/8" and ½" thick drywall. This was designed in Fusion 360, you can get…
Desiccant Dryer in a spool shape and size in order to dry loose desiccant in an active dry box. In my case I am using the Sunlu S4. It also doubles as a desiccant holder to maintain low humidity when the dry box is not running. The big…
Updated (v2) - the first 2 photos show the original v1 model, and show how the buffer weight puts too much curve on the PTFE tubes to the MMU3. Changes in v2: Angled the buffer mount so that the buffer-to-MMU3 PTFE tubes are vertical as…
This remix adds an autorewind spoolholder INSIDE the standalone Drybox. You can then throw away the buffer that comes with the Prusa MMu module. I wanted the original “standalone Drybox with humidity sensor" to support a parametric…
Custom roll holder for using M3x10 screws and nuts. The screws and nuts are completely countersunk.
Description Created a set of ‘fins’ and baseplate with clamps to hold desiccant at the bottom of cereal box dryboxes. The idea is to have it lifted up to get close to the spool with separation between them to allow for better airflow.…
Update log at the end of description INTRODUCTION: This mod involves adding a dry box on the right side of the printer. I decided to make my one as I wanted it be printable on the actual bed size of CORE One printer. I can't garantee it…
I added rev 2 to allow for breathing holes in the stand. prevent any moisture build up. Printing process should be the same.
Stackable Bottle Drying Rack This simple and practical bottle drying rack features a sturdy square design for stability and efficient drying. Its stackable design saves space and allows for easy expansion when needed. The hollow structure…
Customizable Bottle Drying Rack This simple and practical bottle drying rack features a sturdy square design for stability and efficient drying. Its customizable design saves space and allows for easy customization and expansion when…
As i wanted to connect my tumble dryer directly to the drain, I bought a kit with a pipe that has to be fixed on the back of the tumbler. There is a screw on the left back of the tumbler which can be unscrewed to attach a part from the…
A child safety lock for washing machine or washing machine and dryer combos works for all Siemens and Bosch from the last five years
Helps to dry your bottle and water bladder faster. My water bladder is dry after 2 hours and the bottle is dry after a little more than 1 hour. You only need a 40mm noctua fan, no tools and no screws.
Made this little piece to prevent the hinges from our laundry rack from falling off, especially while moving it around. Printed 4 in total, 2 of which are mirrored This design slides over a pipe to stay in place, so you have to have a…
Filament Dryer conversion of Elite Gourmet EFD319 Food Dehydrator. The tolerances are a bit lose use the trays as guide
When you're tired of dry box mounted at back. Usable for both sides, but on right side fan could complicate drilling and mounting. Maybe you needn't take off side fan, I moved bolts higher then on photos. But drill holes for them…
This riser helps convert the TODO / KOGAN / DEVANTI 250w food dehydrator into a filament dryer (They're all clones - you may find more brands that use identical casing and trays):…
This is a center axle bracket that uses the existing bearing holder and axle. I added two different diameter axels to use for spools with larger or smaller center holes. Print Axels with supports as they are at a 30-degree angle to make…
works with various sponge types. Put it between the kitchen sink and the wall. Water will drop into the sink. Print in petg. No support in the given orientation.
This Coupler Hole Jig is an enhanced version of the coupler hole jig provided with @GunplaMark 's outstanding Ultimate Cereal Container Filament Drybox . It provides a more precise drilling location for the coupler than the original…
This is a complete re-build of the laundry detergent lever by PeaRidgeHillbilly. I think that the little button on the top of the laundry jugs spouts are hard to push, and this idea was great. Many have arthritis, and find ordinary items…
Polydryer drybox adapter bracket for Stronger Compact Spool Auto-Rewinder by Rans A modified axle with slits on both ends and an axle bracket that allows for the spool rewinder to slide nicely onto the drybox's existing spool holder…
Simple drying stand for the PHILIPS OneBlade and a razor blade. There are two versions, the first one is a bit small. The second version is thicker and more rigid. Best printed sideways and with a brim.
This Auto-Rewinder for Ultimate Filament Drybox combines modified versions of parts from several filament spool auto-rewinder models to provide automatic filament spool rewinding in @GunplaMark 's outstanding The Ultimate Cereal Container…
I like the dry box design descended from tcosta's design but I don't like the way the spool holder has to be bent open and the spool slid in without snagging. So I designed this one with an axle that can be dropped in vertically and…
I like the dry box design descended from tcosta's design but I don't like the way the spool holder has to be bent open and the spool slid in without snagging. So I designed this one with an axle. The spool can be dropped in vertically and…
These Saddles (regular and short versions) replace the rollers in @GunplaMark 's The Ultimate Cereal Container Filament Drybox - Official Remix to work with my Auto-Rewinder for Ultimate Filament Drybox to eliminate problems with tangled…
Print upright. PETG or PLA. 21.6.2025:I moved the text to the left and right side. It is easier to read for left and right handed people. Other laundry helps Please finde also my scoop for detergent powder:…
please use assembly made by valRC https://www.printables.com/model/1210752-dry-box-for-3d-filament-hygrometer-desiccant-direc
Drying rack has 12 posts (3 x 4) to hold lab glassware items upside down for drying. Note: PLA not suitable for glassware washed in acetone. NEW Feb 2026: Version for polypropylene (PP), which can be used with solvents such as acetone.…
I re-modeled the injection molded compliant button part of a Sunlu S1 Filament dryer. I re-printed a lot of functional and decorative parts for my printer in blue Filament, to add an interesting secondary accent color. This is one of…
Replacement for ceiling dryer. To replace caps and rings. Use PETG
This little helper is meant to support you while washing you drinking bottles. Just place your bottle on top of this dryer and let the water drop out easily. Also it can easily stored in a shelf when disassembling the two parts.
Custom fan mount made for the S1 filament dryer, for attaching a 50mm fan. Connecting the fan requires modifying the electronics of the dry box (perform at your own risk only if you know what you're doing) I soldered a voltage regulator…
This version was could be printed in ASA , making it super tough and perfectly suited for the job. I personally use it with my boxing gloves , and it performs great! I'd love to see how you use it — so go ahead, print it, test it out, and…
a little thing i designed to rise the Creality Pi Dryer above my ups unit, but you can use to rise anything you need to put in a higher place it's designed to have enough space under it for a vultech ups dimensions are: 33 cm lenght, 22…
A holder for a hairdryer which can be mounted to a piece of furniture via press-fit. Especially designed for: - Philips EssentialCare BHC010 - IKEA SUNDVIK It should work with most hairdryers and all furniture with an 18mm wide board to…
In our house, we loathe wasting money on liquid detergents that cost as much as a box of powdered detergent, and clean half as many loads. This dispenser was designed to hold our detergent in a closed box to alleviate some of the humidity…
Desiccant Dry Box for Big W 3.8L Cereal Container. Sits under the spool. Hinge uses a piece of 1.75mm filament. I print using PETG, anything is probably fine though. Designed to print without supports. No screws or parts needed other than…
UPDATE April 24, 2026: I have published the third generation of my Coupler Cap for Cereal Container Drybox as Filament-Holding Drybox Cap . The new Gen 3 version grips the filament very firmly , and it has much smoother operation than…
I added small handle on the screw for 3D printed Filament Dry Box (author - @Sumjai ). Think will be more usable.
A stackable Sodasteam dryer, inspired by Peter's design. I really liked his design as it allows for a compact and secure solution to store the Sodastream bottles for drying. However, it did not fit behind my sink and storing the dryers…
A student in an autistic classroom that I sub in got angry and broke the knob off the Samsung dryer. Luckily for the teacher, I'm pretty good at designing things. It pops on and works just like the original. It would also work on the…
Parts 1x Husky box which can be found at Home Depot 2x Capricorn (or similar) bowden tube kit which I bought at MicroCenter 12x 608 ball bearings - steel or print your own 24x M3x0.5mm 3.85mm deep threaded heat inserts 24x M3x12mm…
The parts are designed for telescopic rod Güde VT 290 but this rod is a generic chinese tool sold under various different brands so the parts might be compatible with other rods too. Boot is designed for a ball with 19.5mm diameter. Both…
We like to keep our hydration pack bladders dry and open after every bike ride. Drain the bladder, hang it on the wall, and keep it clean for your very next adventure. Printing is easy. You need one of of each part . Everything can be…
Annealing Tray for Sunlu E2 Filament Dryer This is a custom annealing tray designed for the Sunlu E2 filament dryer. The stock annealing tray takes up both filament roll slots, but with this version you can anneal parts while still drying…
These little plugs close the two small holes on top of the rear side of the Chitu systems Filapartner E1. There are four more rectangular holes on the bottom. I added a plug for them, too. Update 2025_10_03: Released revision V2 that fits…
My whiteboard unfortunately does not have a tray, so I designed this organizer for dry erase markers, cleaning solution, and eraser. It can hold more than 4 small markers or two larger diameter markers. The cleaning solution bottle is a…
A dry erase marker rack for markers that have larger heads than the body. Below is an example of the type of markers. This is version 2. The previous version had the markers facing up. Which means the markers would not get any ink to the…
The Detergent Funnel is a practical helper for washing machines installed in tight spaces, such as closets. It combines a measuring cup with a funnel , making it easier to pour detergent or conditioner directly into the machine’s drawer…
Single part ring to extend a Silvercrest Food Dryer to fit Filament Rolls inside. Could work with other Food Dryers as well. It is printable on large printers only, like the Prusa XL. I created several sizes so you can print the size best…
In printed with PETG with 0.2mm nozzle. Print without support. Check and clean the printed object properly to prevent damaging textiles. Other laundry helps measuring cup for liquid detergents:…
I made this simple two piece print that simply slots together to create a brush stand. If its too loose a bit of glue should keep it together but way it printed for me it was perfect snug press fit.
Uses the plug circled in red to connect to the m-2j1r. The power supply can output 3v 3amps which is the requirement to operate from rosahl. You can find it here: https://www.amazon.com/dp/B07N18XN84?ref=ppx_yo2ov_dt_b_fed_asin_title…
This is a ¼" version of the a model by @mixon, which is a 45 degree version of the "Drybox filament guide using PTFE tube" made by @mp42, available for OD4mm and OD3mm PTFE tube. If the inside diameter of the fitting is too tight, it may…
Material: PETG Temp.: 235° first layer, 245° others, Fan: max 30% layer: 0,2 Print speed: 170mm/s
I wanted to make it easier to cut new hexagonal opening for PolyDryer Dual Port Adapter by @SparrowHawk_421862 (thanks for that design!). Original model has alignment hexagon template, but you need to position it carefully and secure it…
![Jumbo Integrated Rewinder for 2kg Spools for (un)original Drybox [Drum Only]](https://media.printables.com/media/prints/1128144/images/8513432_593bb1d6-475e-4ace-b06c-6081c0e5e862_75880e9b-7293-4a97-97bb-4398e19ca6ce/img_1127.png)
