Filament Drybox Spool Holder for MK3S+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts Sunlu drybox to the MK3S+
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 2
- Wyświetlenia
- 436
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is simple Dry Box mount for the Jayo/Sunlu. Will probably fit others of similar build. Feeds fine out the front hole. you could add my custom bung found here: https://www.printables.com/model/425801-dry-box-feed-fitting-sunlujayo
The project file is set up to print everything at once. The halves stay together fine, but if you wanted it more permanent you could drop some glue in the top of the retainer clip relief on the mount piece after you assemble it. I have not glued mine and it has worked fine for more than 1,000 printing hours and counting.
Slide the taper plug in from the back for extra security. Helps prevent you knocking it off when your change spools or move it around.
The file is for PETG, PLA worked for for me for awhile, but fell apart one hot day so it is not a long term solution.