1 / 7
Mobile Schuhlüfter - Trockene Schuhe unterwegs. Mobile shoe dryer ->USB<- — zdjęcie 1
1 / 7

Mobile Schuhlüfter - Trockene Schuhe unterwegs. Mobile shoe dryer ->USB<-

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mobile Schuhlüfter - Trockene Schuhe unterwegs. USB geeignet. Mobile shoe airers - dry shoes on the go. USB suitable

Ocena
0 / 5
Polubienia
40
Pobrania
110
Wydruki
0
Wyświetlenia
1642
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

English see below.

 

Es gibt nun auch ein Variante für flache Straßenschuhe, siehe Remix.

Ich habe mich immer darüber geärgert, wenn ich unterwegs nach einem langen Marsch oder einen Lauf im Regen feuchte Schuhe hatte. Im Hotel findet man kaum eine Möglichkeit, die Schuhe schnell zu trocknen.

Deshalb habe ich einen Schuhtrockner entworfen, der für alle Schuhe geeignet ist.

Er ist klein, günstig und lässt sich mit einer Powerbank betreiben.

Liste der benötigten Teile unten.

Es handelt sich um normale 40x40x10 Lüfter.

Davon gibt es Versionen mit 5 oder 12 Volt. Ich nutze die Version mit 12 Volt und schließe sie an eine Powerbank an. Dadurch sind die Lüfter so leise, dass sie auch im kleinsten Hotelzimmer nicht zu hören sind. Der Luftdurchsatz reicht aber völlig aus, die Schuhe schnell zu trocknen.

Wer mehr Power will, kauft sich 5V Lüfter.

 

Ich habe ein paar Tests gemacht und bin mit meinem neuesten Design sehr zufrieden.

Die Schuhlüfter sind ebenso für die Schuhe meiner Frau (Größe 36) und meine Schuhe geeignet (Größe 44).

 

Schichthöhe so niedrig wie möglich, um eine schön glatte Oberfläche zu erreichen, auch braucht man dann weniger Support.

Bitte aufrecht drucken und Tree Support und Brim einschalten. 

Ich habe in 0.07mm und Support mit Enforcer in den Ecken und in der Spitze verwendet.

Teile:

Lüfter (bitte auf die Volt achten): https://a.aliexpress.com/_Eu65kjl

USB Anschluss: https://a.aliexpress.com/_ExWzvRp

Y-Kabel 5,5x2,1:  https://a.aliexpress.com/_Ezzbeth

Schrauben 3*16mm.

Hier gibt es das ultimative Erweiterungsset für Stiefel und hohe Schuhe https://www.printables.com/de/model/587182

Hier gibt es ein einfaches Erweiterungsset: https://www.printables.com/de/model/587175

Viel Spaß beim Drucken!

 

 

--------------English------------------------

There is now also a version for flat street shoes, see Remix.

I was always annoyed when I had wet shoes while out and about after a long walk or a run in the rain. In the hotel you will hardly find a way to dry your shoes quickly.

That's why I designed a shoe dryer that is suitable for all shoes.

It is small, cheap and can be operated with a power bank.

List of required parts below.

These are normal 40x40x10 fans.

There are versions with 5 or 12 volts. I use the 12 volt version and connect it to a power bank. This means that the fans are so quiet that they cannot be heard even in the smallest hotel rooms. The air flow is sufficient to dry the shoes quickly.

If you want more power, buy a 5V fan.

 

I've done a few tests and am very happy with my latest design.

The shoe fans are also suitable for my wife's shoes (size 36) and my shoes (size 44).

 

Layer height as low as possible to achieve a nice, smooth surface, and you also need less support.

Please print upright and turn on Tree Support and Brim.

I used 0.07mm and support with enforcer in the corners and spot.

 

Parts:

Fan (please pay attention to the volts): https://a.aliexpress.com/_Eu65kjl

USB port: https://a.aliexpress.com/_ExWzvRp

Y-cable 5.5x2.1: https://a.aliexpress.com/_Ezzbeth

Screws 3*16mm

There is the ultimate expansion set for boots and high shoes here https://www.printables.com/de/model/587182

There is a simple expansion set here: https://www.printables.com/de/model/587175

Have fun printing!

Tagi