Quick connect exhaust hose mounting sets for portable ACs and dryers various sizes === no supports ===
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,42 € – 0,52 € netto (bez VAT)
Dla pliku: Small clamp 36mm_0.2mm_PETG_MK3S_32m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,47 € netto (środek widełek).
- Masa podana przez autora
- 5 g
- Czas druku podany przez autora
- 31,8 min
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Mounting sets for different diameter exhaust hoses from portable ACs or dryers through windows, doors, or walls or sim.
- Ocena
- 4,909 / 5
- Polubienia
- 1008
- Pobrania
- 3468
- Wydruki
- 21
- Wyświetlenia
- 20 755
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted.
I use a portable air conditioner that I move between 3 rooms with different window sizes, so I needed installations customized for every room and a quick connection for the AC hose. Therefore, I made 3 different-sized plastic boards, one for each room (cheap stuff from the DIY store).
I equipped them with the bushing that I fixed to the boards with blind rivets; screws work as well. I also attached two handles for easy and quick setup and removal.
I fix the boards with clamps to the frame of the window; the clamps are included in 3 sizes and should work for at least a few window types. Get creative if they don't fit, or let me know what you need!
The final part is the hose adapter that is simply screwed onto the exhaust hose. The connection between the bushing and the hose adapter uses a practical bayonet lock, enabling quick assembly and disassembly.
================================================================================
WARNING: BEFORE PRINTING THE HOSE ADAPTER, CHECK THE THREAD DIRECTION OF YOUR HOSE. IF IT RUNS IN THE OPPOSITE DIRECTION, MIRROR THE HOSE ADAPTER IN YOUR SLICER!
================================================================================
=== Only grab handle needs small supports ===
===== UPDATE =====
150mm / 6"
- Rivet- or Screwcover added to cover the rivets, screws, or whatever you used to fix the bushings. It is a very light-duty shrink fit and should slide over the bushing with little effort. If it doesn't, you can place it back on the printer bed and warm it up to mount it.
- Bushing with countersunk screw holes added.
100mm / 4"
- Added a full set (bushings, hose adapter, Rivet- or Screwcover) for 100mm exhaust hoses.
===== 2nd UPDATE 11.07.2024 =====
150mm / 6"
- Lid to close the bushing if permanently installed added, maybe use a thin sheet of cardboard or foam to between lid and bushing to seal it properly.
- Slim bushings added, less material usage, less printing time.
===== 3RD UPDATE =====
150mm / 6"
- Exhaust hose adapter for external hose attachment added, allows fitting a larger variety of 150mm / 6" hoses. I received feedback and experienced issues myself with some hoses that are difficult to fit.
===== 4TH UPDATE =====
100mm / 4"
- Lid to close the bushing if permanently installed added, maybe use a thin sheet of cardboard or foam to between lid and bushing to seal it properly.
===== 5TH UPDATE =====
170mm / 6.7"
- Added a full set (bushings, hose adapter, Rivet- or Screwcover) for 170mm exhaust hoses.
===== 6TH UPDATE =====
130mm / 5"
- Added a full set (bushings, hose adapter, Rivet- or Screwcover) for 130mm exhaust hoses.