Tesla Model Y Juniper 19" Wheel Rim Protection Trim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Curb rash protection for Tesla Model Y Juniper 2025/2026 19" Crossflow wheels. 6 or 8 segments with 3M tape mounting.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 644
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Tesla Model Y Juniper 19" Wheel Rim Protection Trim
Protect your Tesla Model Y Juniper (2025/2026) 19-inch Crossflow wheels from curb rash with these 3D-printable rim protection segments.
Features
- 6 or 8 interlocking segments - fits standard 220mm-256mm print beds
- L-shaped profile - protective shield faces curb, retention lip wraps around rim edge
- Rounded edges - smooth, finished appearance
- Tape channel - recessed channel for secure 1/4" (6.35mm) 3M VHB tape mounting
Specifications
- Designed for ~520mm outer rim diameter
- Shield width: 9mm
- Shield thickness: 3mm
- Lip height: 5mm
Required Materials
- Filament: PETG recommended (UV resistant, flexible, durable)
- Adhesive: 3M VHB 4611 tape, 1/4" (6.35mm) width - automotive exterior grade
Print Settings
- Layer height: 0.2mm
- Infill: 100% (walls are thin)
- Perimeters: 4+ recommended
- Orientation: Print flat (curb-facing side down)
- Supports: None required
Installation
1. Clean rim surface thoroughly with isopropyl alcohol
2. Apply 1/4" 3M VHB tape into the recessed channel on each segment
3. Position segment on rim edge - retention lip wraps toward tire
4. Press firmly for 30 seconds per segment
5. Allow 24 hours for full tape bond strength
Notes
- Print one test segment first to verify fit
- Trim is sacrificial - designed to be damaged instead of your rim
- Individual segments can be replaced after curb contact
