1 / 1
Tesla Model Y Juniper 19" Wheel Rim Protection Trim — image 1

Tesla Model Y Juniper 19" Wheel Rim Protection Trim

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Curb rash protection for Tesla Model Y Juniper 2025/2026 19" Crossflow wheels. 6 or 8 segments with 3M tape mounting.

Rating
0 / 5
Likes
8
Downloads
61
Makes
1
Views
650
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Public Domain

Tesla Model Y Juniper 19" Wheel Rim Protection Trim

Protect your Tesla Model Y Juniper (2025/2026) 19-inch Crossflow wheels from curb rash with these 3D-printable rim protection segments.

Features

- 6 or 8 interlocking segments - fits standard 220mm-256mm print beds

- L-shaped profile - protective shield faces curb, retention lip wraps around rim edge

- Rounded edges - smooth, finished appearance

- Tape channel - recessed channel for secure 1/4" (6.35mm) 3M VHB tape mounting

Specifications

- Designed for ~520mm outer rim diameter

- Shield width: 9mm

- Shield thickness: 3mm

- Lip height: 5mm

Required Materials

- Filament: PETG recommended (UV resistant, flexible, durable)

- Adhesive: 3M VHB 4611 tape, 1/4" (6.35mm) width - automotive exterior grade

Print Settings

- Layer height: 0.2mm

- Infill: 100% (walls are thin)

- Perimeters: 4+ recommended

- Orientation: Print flat (curb-facing side down)

- Supports: None required

Installation

1. Clean rim surface thoroughly with isopropyl alcohol

2. Apply 1/4" 3M VHB tape into the recessed channel on each segment

3. Position segment on rim edge - retention lip wraps toward tire

4. Press firmly for 30 seconds per segment

5. Allow 24 hours for full tape bond strength

Notes

- Print one test segment first to verify fit

- Trim is sacrificial - designed to be damaged instead of your rim

- Individual segments can be replaced after curb contact

Tags