Counting matching models…
New version of the wallet available here Update 04/08/2022 : I changed the tolerances, it should now be less tight for the cards. I also made a little change to prevent the last card from going behind the mechanism. These updates are only…
Print approx. €2.68–€3.28 excl. taxPreliminary estimate for one variant
Chances are you’ve heard about ocarinas thanks to the Nintendo game The Legend of Zelda: Ocarina of Time, whereas the name suggests, it plays an important role. Print this one in Blue and use to Triforce collar to make it look like the…
Print approx. €3.18–€3.88 excl. taxPreliminary estimate for one variant
Catapult Card A fully 3D printed catapult, prints flat within a card, so it fits in a C5 envelope, fairly powerful, lots of fun! Why Designed to be printed flat, including all the parts required for assembly. It’s a fun little toy, great…
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant
NOTE: The new version linked below has much improved clips which are less visible than this version. NEW IMPROVED VERSION AVAILABLE HERE!!…
Print approx. €5.25–€6.41 excl. taxPreliminary estimate for one variant
Update: 08/09/2023 Updated some slots for better fit, hip-to-neck slot is arrowed for correct orientation, and improved surface icons for orientation of "skull" parts. Also added are not boring instructions, but an exploded view showing…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
1:64 print-in-place kit card. Assembly required Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy. I have included both a single color version and a multicolor version edit 04.03.24:…
Create your own battle droid army and take over the galaxy! If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee (PayPal). Thanks!…
Storage sleeve designed for FJ Cruiser center console. Main section to fit mobile phone (etc.) and two attachments, one sized for a gum container and the other for a small bottle and lipsalve. Extra road trip storage :) Print Settings…
Description The Lockheed Martin F-35 Lightning II is an American family of single-seat, single-engine, stealth multirole combat aircraft designed for air superiority and strike missions; it also has electronic warfare and intelligence,…
This model is for a Brio compatible as well as Duplo compatible train car. It's based on a 6x2 Duplo brick and has magnets on each end to mate with existing Brio cars. Each car requires the following printed parts: 1 Body, 4 wheels, and 2…
Gridfinity holder for FastCap ProCarpenter True32 Metric Reverse Measuring Tape. I think this may fit other fastcap tape measures in the ProCarpenter series but I only have the metric one so I cannot confirm that. Full product description…
Many RV (caravans, campers, trailers) have a bumper made of a heavy steel square tube. If you put a cover on it which is easy to put on and remove, you can store stuff inside the bumper. These bumpers are usually 6 ft / 2m long, so you…
Deutsch: Gruselkürbis mit Gesichtsausdruck – Perfekt für Halloween! Unser Kürbis mit schaurigem Gesichtsausdruck bringt die perfekte Halloween-Stimmung in Ihr Zuhause. Ideal als Dekoration für Partys, Fensterbänke oder den…
Ranger vos cartouches de jeux Nintendo (Game boy, Game boy color, Game boy advance, DS, 3DS, Switch)
I'm big fan of Dummy 13. I usually print it in 150% for my sons and their friends. I wanted to print “parts on runner” version on my A1 Mini in 150% and faced size issues. It just bigger. So, i've modified runner to fit A1/Prusa Mini…
Summary This is a model of a Shelby AC Cobra 427 in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the car…
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter. Simple to print, easy to install, and has helped to improve my Quality Of Life. IMPORTANT Please read the instruction guide below. I do my best to…
The holder is for smartphones with width = 7.3 mm and thickness = 9 mm, such as the Huawei P30 Pro. The bracket can be attached to standard connectors. The variants differ in the position of the connection surfaces. Since the Brodit…
This is a display stand for the bento boxes from Awajiya/淡路屋 in Japan. It's not meant to be a model train that can roll around the tracks (despite the wheels do run 😉.) I've had a chance to get all three variants of the JRFreight…
A simple armed freighter (self-designated Feisty-class). This was an experiment in using casemated cannons (instead of turrets), of which this ship has four casemates in the forward superstructure for self defense. There is also a…
T he floating fortress of the King of Evil… From the location in The Legend of Zelda: Ocarina of Time , here is Ganon's Castle! Everything prints entirely without supports , parts can be printed separately and assembled after. Check out…
Changelog: Intro This is the Breezebuggy, a high performance ride-on outdoor use play car intended for children ~3-9years old. The car has been thoroughly tested and iterated upon to reach a high level of maturity in printing, assembly…
Scarecrow Halloween wall art. Print in parts main scarecrow piece then pick a number and a few sizes to print and place your bats.
This is an insert for Kreel Manor , the boardgame. It keeps all the components from the base game and two expansions organised. I am using Sleeve Kings (60micron) sleeves to sleeve my cards, if your sleeves are thicker, the cards may not…
Needed material: M3 16mm screw & nuts (x20) L298N Motor Driver (x1) ESP 32 (x1) DC Motor (x2) I printed with .4 mm nozzle, PETG for wheels and PLA for other
Good day, dear friend. You can find two versions of the tray. In version 2.0, the destruction and sick people chips are combined with the sick people figures, I found it more convenient. But there is also a place for the destruction and…
crochet pour rail 10x5mm (avec ou sans creux) J'utilise sur mon transporter
This is an AMPS mount for carpuride W603 (or W603D). Requires to be mounted from the back!!! You also need: 1 pcs M4 20mm washer (also called wood washer) 1 pcs M4x16mm panhead screw 4 pcs M4 nylock nuts 4 pcs M4x20mm (minimum) screws,…
Oy! I was looking for a Sorting tray to sort out all my Mtg cards without taking too much space, I found one for catan cards and went to work. •I design the model to accommodate cards without sleeves, its a perfect fit for those! But I…
Water Bottle Car Cup Holder Adapter designed for Camelbak Chute 32 oz. Will fit water bottles up to 9.5 cm in diameter (ideally larger than 8.75 cm). Print with support for overhangs or slice into 2 pieces to attach with screws. Planning…
Trays to store all (unsleeved) cards from all expansions.
For securing the towel. Stays there during washing and drying too. No need for drying line pegs, easy to put on the hook too. Reuploaded from Thingiverse and fixed the STL (it had broken normals).
Hier sind meine gridfinity bin für Speichermedien sowohl für alle Typen ein als auch einer wo alle vorhanden sind wenn man von einer Kategorie nicht soviel hat
This 5 IN 1 model has: A hexagonal scraper handle 3 print scraper blades to scrape prints off of your 3d printer's bed 3 car defroster blades to defrost your car's window 2 different types of scratching blades A storage tray to store all…
v1 Of some Drift wheels for my RC Car. See Link for Car details. I have printed and tested these in PLA and they work a treat. Files added if you want to edit them…. No Support required. Outer Diameter 110mm Have fun and share if you like…
very swag tiny carnival if you down load you can add ur own motors or whatever you want. You can use it for figure photography.
Whether you're an outdoor enthusiast, a DIY master, or just someone who loves functional gadgets, this 3D-printed carabiner is the perfect blend of style, strength, and convenience! Designed for everyday use, our lightweight yet durable…
Make your pumkin funny or scary with theese eye stalks! They are super easy to print, no mmu and no supports required. V1 : https://www.printables.com/model/615941-scary-eyes-for-pumpkins These bloody eyes of terror will be watching in…
This is my best recreation of a Chevrolet Camaro. I suggest printing upright with normal supports. -also, could also be used as a finger skateboard :) Have fun printing!
Print per original model instructions. I recommend 3 walls with a 0.4mm nozzle for the frame.
An organiser holding 2 TZ (TZe) Brother label maker tapes I use it to keep yellow (warning) and red (danger) tapes at hand Print notes No supports needed Updates log 2024-10-12 Initial version released Support the author The model is free…
The Card Phone Holder is the perfect companion for anyone looking to use their smartphone comfortably without taking up much space. This foldable phone stand is credit card-sized, making it easy to store in your wallet or bag. Features:…
Hello all, this is my first uploaded make! This is a combo stand for carts and the accompanying battery device. For those pen style batteries that don't stand on their own to prevent the concentrate from lining the side. It was especially…
Kartenhalter optimiert für das Kartenspiel Rommé für maximal 13 Karten. Kann auf den Tisch gestellt sowie auf der Hand gehalten werden. Ich empfehle 2 Perimeter und ein lightning infill von ca 15%. Sowie konzentrische Deckenfüllung.…
These are 2007-2018 Wrangler JK tire carrier delete plugs. I designed it to fill the holes and to be really snug. Just print it upside down. I printed it with standard settings with PLA, but i think PETG will be better…
These are holders for “ SteveJohnsen ”s custom projectiles. His projectiles are used for Adam-M 's "Catapult Card". There are 3 different sizes for my holders. 2x2, 2x4, and a 4x4. They all can hold SteveJohnsen's discuses. (I think, pls…
Holder for 24 car blade fuses, remixed from original design fro thingiverse. For more details see original page.
Gap 1mm-5mm Precise spacers for adjusting fronts ensuring a perfect fit. Even gaps, perfect alignment of fronts in furniture. Ideal for both DIY and professional furniture makers.
Summary This is a model of a Chevrolet Camaro RS/SS (1967) in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned,…
Cardboard shipping tube lid Models: Simple lids for closing cardboard transport tubes. The lids are available in two sizes, for rolls with an inner diameter of 40mm and 99mm. The size can be adjusted with scaling in the slicer. For…
Originally the remix of the ingenious Car Vent Gravity Phone Holder by Abdel Darwish that in the version V3 I remodeled from the scratch, keeping the original idea and general outline. Main changes in V4 (2025-07-26) Changed parts : Arm…
Jeremy and Garth of Jaded Parts came up with a great idea for a snap-on two finger (or three!) trigger attachment for the Professor Motor controller. I like their design much better than my own two finger trigger for that controller,…
Minor changes to the original moved the top clip down a few mm to hold the controller more securely raised the plinth for the grip a little for the same reason I also added a 3mf that puts two holders in the space of a shelf for the…
Tried of picking up lose bills? Sack full of coins weighing you down? NO MORE! Now you can just swipe your card and keep shopping. This toy pinpad with card reader makes a great addition to any play store. update added a second file that…
About this model This model was designed in FreeCAD - FOSS (Free and Open-Source Software) 3D parametric modeler. Source file is available. It is not 100% accurate in details, but proportions are true to original. Requires glue and metal…
Print 2x same model with PETG Designed for: 0.25mm nozzle / 0.07mm layer OR 0.4mm nozzle / 0.1mm layer When using transparent PETG consult your Filament Specs
Yet another box for game cards such as Pokemons, Yu-Gi-Oh! and may be others. I call it "boring" as it does not have any buttons, locks, gears, bells, whistles etc as other game card boxes. Just a large box with lid and spacer. It can…
Summary This is a model of a Lancia Delta HF Integrale Evoluzione 2 in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhaust ;-) After printing, the model can be assembled with the help of…
A mount for the cartographer probe on the switchwire/enderwire. It's a remix of the x carriage and the belt grippers to provide clearance for the probe and wires. Mount requires two more heatset inserts into the bottom of the carriage and…
Qidi X-MAX3の為の部品です。 ケーブルキャリアが右奥に移動した際に、フレームリブに干渉してしまう恐れを回避する部品です。 右側のステッピングモーター取付フレーム、上部にある四角の穴に差し込み使用します。
The 30" Harbor Freight 1-drawer service cart has 4" swivel casters on all four wheels. This may sound like a great idea, in practice, having 4 swiveling casters makes it difficult to move the cart in a straight line across a driveway or…
Flush mount design Hidden fasteners to mount the bracket Just press the google unit into place, FRICTION does the rest!!!! (IF your machine runs true to size, just print it.. you MIGHT need to scale in slicer for a tighter fit IF you run…
Replacement leg for Schmidt Classic Line Rummy.
The trailer hatch of a toy car broke - so I had to design a small replacement part. Thankfully the original part was mounted with just one single screw.
A deeper version of the great Twin Cupholder. This one goes all the way to the bottom in the Mercedes and won't fall out.
debes pegar en la tapa de abajo la lamina que hace contacto con la bateria en el polo positivo para que no se mueva dentro con el uso
Designed using the Parametric Rugged Box by Whity (https://www.printables.com/model/258431-rugged-box-parametric/comment) with specific fitment for the Canon Selphy 1500. No supports needed. Recommend extra walls and higher infill for…
Designed for 18 mm thick board. Front raised by 1 mm Furniture front assembly tool This makes cabinet door assembly child's play The template is equipped with a support arm that helps hold the door with one hand, while the other hand can…
Changed the original lid to fit when SD card is inserted.
This is a plunger for the 3M DMA 50 dispenser. This dispenser is made for the 3M 2 part adhesive Duo-Pak cartridge. With this plunger, the 3M dispenser can dispense Loctite 50mL (50g:9g) SEMPAK cartridges. I printed in PETG, 0.4mm nozzle,…
A two part carrying case designed to be able to carry the Novolizer style inhaler without the button constantly being inadvertently actuated. Created with the help of a 3D-scan of the inhaler to enable a good fit in the case. Printed on a…
Rollerski and poles carry holder. Securely holds everything in place while you travel to the ride via any menas of transport or by walking. Easily adaptable to particular rollerskis thanks to OpenSCAD source. Simply adjust parameters in…
These i printed for these magnetic hard cases i have, no idea if they're universal, i dont collect cards usually. The cases i have measure around 7mm in thickness and 73mm in length, hopefully this helps to know if it'll fit your holders
Showcase your prized Hot Wheels or other 1:64 scale die cast cars in style with this custom 3D-printed display shelf! Featuring a sleek, tilted design, each compartment perfectly displays up to 10 cars, making sure they stand out from…
UPDATE Feb 10, 2025 I have added an overlay for the cracked insight dial. Both insight dials (normal and cracked) plus their corresponding overlays still fit in my remix of js500's player trays. (Barely!) I printed these using BambuLab…
Stand for OXVA Xlim Pro 2 Vape Pen + Cartridge + Small Liquid Bottle Holes are intentionally slightly oversized so it's easy to put the items in and out without the risk of scratching the device. Additionally you can slightly tilt your…
Alternative version of my stand for OXVA Xlim Pro 2 Vape Pen + Cartridge + Small Liquid Bottle ( https://www.printables.com/model/1068557-stand-holder-for-oxva-xlim-pro-2-vape-pen-cartridg ) One isn't necessarily better than the other,…
This is Brick Tree it is inspired by popular brick company tree. Made this on kit card to have more fun. Give it away as a gift or put it together with kids or if you feel very adventurous, do it by your self, there is no manual included…
for 23mm handler for big soldering iron made for https://www.printables.com/model/1038915-fully-3d-printed-heat-set-press
Hotwheel Display Garage A Garage Display where you can put your 1:64 model cars in and mount it on the wall. How to Assemble: Take the connection pieces and insert them into the holes of the Display Garage so that they stay together. How…
![Kreel Manor (+2 expansions) boardgame insert [sleeved cards]](https://media.printables.com/media/prints/1030542/images/7821235_276faf54-0f70-45a0-984a-75633e132b54_ec463192-62a6-4ea7-b8a3-f94d8b21f21f/km1.jpg)
![Rollerski (Skiroller) and poles carry holder [OpenSCAD]](https://media.printables.com/media/prints/1067432/images/8075867_116facf1-d862-494a-a027-1216254b6951_ff1b5bc4-f6d3-4edc-90fa-da83c27c6821/photo_3_2024-11-08_16-18-26.jpg)
