Cardboard Spool Rim with Minimal Sides
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.59 – €0.72 net (excluding VAT)
For file: Cardboard Spool Rim with Minimal Sides_49m_0.12mm_225C_PLA_ENDER3V2.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.66 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 48.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A minimal cardboard spool rim for use with the Bambu Labs X1 AMS & other printers. Has some sides to keep on the spool.
- Rating
- 5 / 5
- Likes
- 279
- Downloads
- 2,334
- Makes
- 14
- Views
- 14,814
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This version of the carboard spool rim has a tighter fit than the original, which seems to work better when used on Polymaker rolls, though I was still having problems on some rolls with them coming off. Instead of gluing, I added some rails to hold them on – similar, but different that the OG version. The version used in the photos is using a 0.12mm layer height to make it nice and smooth, which on the Bambu X1 is still a 15 minute or less print.
There can be some variability across different spools, so you might need to increase the print size to ~102% or decrease to ~98% to get the right fit.
Update 1: Added three additional alternate patterns. Generally, I don't prefer these as they take a little bit more filament and can be harder to get on.
Update 2: Added two more models. 1) Support your Polymaker pride with a rim sporting the Polymaker logo. 2) “Attaching to Polymaker Side Hole” locks in the side hold of a Polymaker spool and uses less filament than the original remix (but more than the original model) to help ensure it stays on the spool.