Counting matching models…
Bought the Polymaker Polybox drybox Edition 2 to keep my filament dry. The box comes with some plastic tubing with a 6mm outer diameter to guide the filament to your printer but no way to mount it your printer. Searched a bit for already…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
I made a desiccant tray for the polymaker polybox so you can use your own choice of silica gel desiccant beads instead of the provided packets. It fits like a glove in my Polybox edition 2, should also fit in the original Polybox, but…
Print approx. €2.59–€3.16 excl. taxPreliminary estimate for one variant
The Polymaker Reusable Master Spool is a durable, empty spool designed to hold refill filament coils sold without disposable plastic spools. It allows users to reuse the same spool multiple times , reducing plastic waste and shipping…
Other polymaker cardboard spool adapters out there have the following problems: 1. They fall off 2. They slip during AMS rewinding 3. They are so large that they require you to leave the AMS lid propped open so that they don't rub on the…
I have made some Profiles for myself to Print these Nylons and wanted to share these for others to use. These are for the P1S but they probably work for the X1C aswell, i am using Orca Slicer and the 0.4mm Nozzle.
The Polymaker Reusable Master Spool is great, but having the holes modeled into the part means the slicer has to create a lot of perimeters (which makes for slow printing). The slicer is optimized for creating sparse infill patterns that…
Hello, I created a desiccant tray for Polybox II I haven't tested it if this shape fits for Polymaker ver.1 It has top cover so you can't spill out beads For the hinge use: 2x M3x20 allen screw and 2x M3 standard nut v2: Hinges change,…
See Text file for settings, orcaslicer profile in the .zip. To add go to file-Import-Import Configs and it should add it in. It will only show under bambu p1s 0.4mm nozzle size To avoid confusion. the filament will be added under the…
SUPPORT MY WORK If you appreciate my designs and would like to support my work, or if you're interested in a commercial license to sell my models, here are some options available: PayPal Subscription Plan: Subscribe Here Patreon Site:…
Designed for Polymaker and Overture spools, but will fit any 55mm ID, 65mm wide spools. Works well with Voron and Prusa style spool holders. Comment if you need any different sizes and I'll add them!
I wanted to invest into the Polymaker refill system but with a stronger spool design as I found that the original spool sides fell apart pretty easily after just a little bit of use. Improvements: Spool sides connected with fasteners M3 &…
Plastic spools seem to work better in the Polybox using the bottom rollers. Cardboard spools seem to work better using the spindle tube. If you're like me, you've lost your spindle the first time you've placed a plastic spool in the box.…
I love Polymaker filmament, and when they released their Polymaker Reusable Master Spool for Refills ( https://www.printables.com/model/1477612-polymaker-reusable-master-spool-for-refill ) I was super excited, until I realized that their…
Remixed version of the french cleat wall mount. I drilled holes into the piece to line up perfectly with threadboards. I used 5 screw to hold this onto the wall and it works great! Infill - 50%
Polymaker Cardboard Spool Adapter I used the original Polymaker cardboard spool adapter to keep cardboard dust out of my AMS. The one thing I missed was a way to attach an NFC tag e.g. NTAG 215/213/216 to the adapter. I use a special…
I felt the need (no science involved) to have a desiccant box at the front of the unit as well. I'm not sure how this will affect the accuracy of the hygrometer.
There are many models of trays that fit the front or rear part of the Polybox 2, this one fit in the middle to add even more dessicant. Could work with the first Polybox model, not tested. Similar design that goes well with :
Why Use Rims? Printed rims improve the strength and reliability of cardboard spools. They also prevent the buildup of cardboard dust that can interfere with material handlers. Which Version? These models fit Polymaker 1kg cardboard…
A plug to replace the existing ones. This one has no hole for a PTFE tube nor the filament. It works well in TPU.
The Polymaker Reusable Master Spool is great, but having the holes modeled into the part means the slicer has to create a lot of perimeters (which makes for slow printing). The slicer is optimized for creating sparse infill patterns that…
The insert for the Polymaker Reusable Spool is just a little too small to fit a 25mm RFID such as the ones that are compatible with a Creality CFS (MIFARE 1k RFID tags which can be used with the “RFID for CFS” app) This remix knocks out…
This is a 3d-printed insert meant for Polymaker cardboard spools with a 55mm inner diameter. This will reduce friction between the cardboard of the spool and the spool holder it is mounted to.
This is a remix of Sam Wolfson’s Lid model for the Polymaker spool desiccant holder. The original design prints using Vase (Spiral) mode which makes the latching mechanism flexible. This model borrows the design languare of the original…
I love Polymaker filmament, and when they released their Polymaker Reusable Master Spool for Refills ( https://www.printables.com/model/1477612-polymaker-reusable-master-spool-for-refill ) I was super excited, until I realized that their…
Spool dimensions used to create this adapter: 55mm hole diameter 66mm spool width
This is part of a project to use the Polymaker dryer to send warmed, dehumidified air to my Unofficial Prusa Drybox. This contains five reels of filament - mostly PETG - which feed an MMU3 on my MK4S.
With this modification, it is possible to attach an NFC NTAG sticker to the adapter in a "hidden location". The next "NFC" was added via OrcaSlicer's TextTool.
One of my biggest gripes about the Polymaker dry boxes is how standard PTFE and bowden tubes get pulled inside the rubber ports on the box, especially since I use several with my MMU3, and the large tubes they ship with sit in my parts…
Print Settings: Rafts: Yes Supports: Yes Resolution: 0.2mm Infill: 20%
Why Use Rims? Printed rims improve the strength and reliability of cardboard spools. They also prevent the buildup of cardboard dust that can interfere with material handlers. Which Version? These models fit Polymaker 1kg cardboard…
Super Quick and Dirty spool adapter I designed for winding filament onto polymaker0 spools. I purposely made it slightly undersized so iI could add a layer of tape for extra grip on the spool. i have added the fusion files if you want to…
Rail System for Polymaker PolyDryer Box for Filament Drying This custom rail system is designed to hold up to five Polymaker PolyDryer Boxes, making filament drying more efficient and organized. Thanks to the removable cap design,…
Here is my third take on a hanger design for the Polymaker Polydryer. I have another design for Ikea Skadis mounting available HERE , which is the same design. The only difference is the Skadis hooks were replaced with a French cleat for…
Here is my second take on a hanger design for the Polymaker Polydryer. I have another design for a different mounting orientation available here . This design takes up less space on the Skadis board while allowing access to the power…
Show off your branding! Got bored one night and decided to be semi productive and make a few magnets for different things. Magnets are printed INSIDE the object, using 20x10x2mm magnets. Can be found easily on amazon.…
This is a remix of NeedItMakeIt's model resized to fix Polymaker spools. It also fits perfectly in Bambu Lab and Overture spools. Use the same settings as the original: 0.7mm default line width All other line width settings increased by…
I printed the keychain with the Polymaker logo using 12 colors PolyTerra. ≫ More details (Twitter / X) Print settings Rafts: No Supports: No Layer height: 0.15 mm Infill: 15 % gyroid Temperature (nozzle / bed): 190℃ / 60℃ Nozzle: 0.40 mm…
This is a simple lightweight spool adapter for Polymaker cardboard spools, specifically the newer kind that has the holes spaced 120 degrees apart. It slots into the holes to provide a bit of a better fit. I've got a few variations…
Isolation Enclosure for Polymaker Polydryer A shell to clamp around the body, holding insulation-material in place, so the filament drier is more efficient and can be used at colder outside temperatures. Test printed with pla - holds up…
A plug to replace the existing ones. This one has no hole for a PTFE tube nor the filament. It works well in TPU.
Simple cover, easy to print with no support. TPU\PLA\PETG are all OK.
I needed a support for the "Polymaker 3D Printing Filament Dryer" to adapt it to the side of my AMS. I designed an adapter that fit an stay on the SIDE of the AMS. The adapter fit Polymaker 3D Printing Filament Dryer (…
Adapter for noctua NF-A4x10 24V replacement fan to quiet down the polydryer. Uses screws that come with the noctua fan, prints with no supports. => the part only interacts with the “cold” side of the heater, still recommend heat resistant…
Replacement faceplate for the Polymaker Polydryer. Prints with no supports - recommend heat resistant material - use petg-cf myself with no problem.
Angled Display for the Polymaker Polydryer to increase readability. Splicing of the brown cable by +-20mm was necessary. Faceplate can be found here: https://www.printables.com/model/1170811-faceplate-polymaker-polydryer Perfect time to…
Small unobtrusive middle bearing for polymaker cardboard spool for more reliable use on a spool holder print 2x no supports with the outer rim on the build surface
I designed this seal adaptor to be able to use the PC4-M6 Bowden Push-Fit Adaptor in the Polymaker PolyDryer Box without any modification to either part. I printed this seal adaptor out of TPU to press into the PolyDryer Box. The PC4-M6…
If you're like me, you're tired of wrenching the lids of these Polydryer dryboxes open every time you need to load filament. I leave the PTFE tube in the dryboxes even when I don't print, so that I don't need to open the box to load my…
Just rip one of the cardboard sides off the spool, slap one of the halves on, flip the spool, rinse and repeat. The cardboard center keeps the filament nicely on and when you run out you just screw this spool open, discard the cardboard…
Multipart Polymaker 3Kg Cardboard Spool Support.
I recently purchased several Polymaker dry boxes (PolyDryer Box). These boxes come with a bowden tube that is meant to be pushed in the seals of the boxes to print. After trying a couple of different methods to get this to work with my…
This custom-designed end cap fits perfectly on the PTFE tube included with Polymaker's PolyDryer kit. Keep moisture out and protect your dried filament with this easy-to-print, functional plug. The cap features a precise fit with an inner…
Snap-fit bushings for Polymaker paper filament spools These bushings help reduce rolling resistance on the spool and prevent paper shavings. The picture shows shavings from a new spool ( PolyTerra 1kg Peanut PLA ) after a 20-minute print.…
I kept having issues with PTFE tubing getting pulled into the Polydryer box while printing when the tubing was run through the included rubber grommets/ plugs. This nut lets you remove the rubber plug and mount a M10x1.0 threaded coupler…
One of the original plugs of one of my PolyDryer dry boxes was damaged by my Bentley (my female bunny). I originally thought I might see if I could purchase a new plug from Polymaker, but with some inspiration, I decided I'd make my own,…
Print on 0.4 noozle with 5 perimeters and 20% infill from PLA. The stand is designed for polydryer box and heating unit.
Passender Adapter und Verschluss für den Polymaker Passender Dichtring https://www.amazon.de/dp/B07GP4WKFM?ref=ppx_yo2ov_dt_b_fed_asin_title
Polymaker Cardboard Spool Adapter Remix for the CFS RFID reader. removed outer ring because it made spools too wide
These are dustcovers that fit over the inlet and out openings on top of the Polymaker Dryer. (https://a.co/d/fseLejl). Two required. I printed these .20mm layer height and 15% infill.
I love the Polymaker PolyDryer boxes, but I wanted a way to securely connect the 4mm PTFE tube to the box, so I made this model. The adapter is chamfered on the inside to gently guide the filament to the coupler. It can be installed on…
A shaft/roller for Polymaker's PolyDryer. When printing fast the PolyDryer introduces gaps/blobs into the print because the spool starts to hang/drag. I designed and tested this new shaft/roller to be used instead of the non-rolling shaft…
I printed the ring out of 95A TPU. I didn't dry it long enough b/c I'm a pro and I can print TPU without drying it. So there's a bit of stringing involved. The other part I printed out of a brilliant color PLA which is a must. If you make…
I used a few models from @VincentGroenhuis to make the auto rewinder. The issue I had was that I want to use the PolyMaker Drybox system for my spools. This is a simple adapter that allows you to install the Auto Rewind Spool Holder in…
PrusaSlicer filament profiles* for the various lines of filament produced by Polymaker. Because well-tuned material-specific settings outperform generic default settings. * Or ‘presets’ as the kids are now calling them. Observations…
I made the Double barrel mod slightly taller so I only had to print one set of the air exchangers. Print both as you would the originals. Link to air exchangers- https://www.printables.com/model/1048454-polydryer-air-exchanger
This is the first design I published. After using filament from the PolyDryer box from Polymaker, I had to open it again and lost quite a bit of the dryness inside. So, time for a solution. I designed a magnetic spool holder with only 2…
Reuse your old cardboard spool by removing the glued side pieces from a Polymaker cardboard spool and replacing them with flanged side cover. This is good to use with spool refills, although I cannot guarantee that it will fit exactly, it…
The original desiccant container fits the back corner of the PolyMaker PolyDryer, but the slits / grilles were set at 2.0mm which were too big for the desiccants I have. Since the desiccants were spec to be at least 1.2mm, I've modified…
Hi Everyone, I made this as I needed the dryer to stay still while printing I tried different methods and then found PteroDancer part and thought I could totally remix for my application. Huge thanks to PteroDancer. I see this print as a…
Dry boxes are great for your PLAs and ‘standard’ filaments. But as you move into your nylons, the filament needs to be actively dried during printing to maintain a proper humidity level. The Polymaker PolyDryer is warm enough to maintain…
Many new cardboard spool adapters are available to choose from. This adapter addresses the need to work with more than one brand. This adapter will work with either Elegoo or Polymaker cardboard spools. 2 rings are suggested. These have…
This model is a tube cap designed for the PTFE tube included with the Polymaker Dryer Box . The cap is sized for a tube with an outer diameter (OD) of 6 mm and features a 1.75 mm filament passthrough . The passthrough allows a small…
Update 11.06.2026: Ich habe zu den Dateien ein Adapter hinzugefügt mit einer Materialstärke von 4mm für Nutzer, die es nicht mit ABS/ASA drucken können aufgrund vom fehlenden Bauraumheizung. Somit kann diese Variante vom Adapter mit z.B.…
Rules: -Weigh less than 50g -Cannot be assembled -Must open to accept 8mm shackle The competition was a head-to-head tug-of- war, last to break wins. We could choose between PLA, PETG or ABS depending on the opponent we were up against.…
While using the Polydryer system with my MMU3 I would occasionally have times where the PTFE tube would be pulled up into the drybox when printing. To help with this, I made this simple retainer that can be glued on to the inside of the…
UPDATE late Sep 2025 : Added a spool sized for eSUN spools. I also added a spot for a pop-in label (didn't like the idea of having to write it in). I've included a few STL label files with multiple bodies so you can “split to parts” and…
Two of these fit snugly in the lid of the plydryer box. When loaded with desiccant they will not fall out and installed they leave room for the filament roll to spin freely. To make the mesh on the lid you must use a modifier shape with…
@GunplaMark noted in one of his videos that he uses the desiccant dryer for the Polymaker Polydryer designed by ElMagicoDeOz (link to MakerWorld). I love this tool, but there was one downside. I had a hard time pouring the dried desiccant…
Motivation I wanted to provide a continuous PTFE tube connection from my Polymaker PolyDryer Storage Box to my Prusa CORE One. Solution Design and print a custom adapter and nut to accept a pneumatic fitting for a PTFE tube that achieves…
je voulais un axe le plus libre possible en utilisant les axes fournis dans la boite du polydryer . je modifie la rainure interieure centrale de 7.7cm a partir du bord superieurs pour rabaisser la bobine et quelle ne touche a aucun bord .
Created a spool adapter for use in a Bambu Lab AMS system that removes the hub area. Thickness of adapter is 2mm and has a better lip lock system. Print from PLA or ABS at .2 resolution. Part modeled in CATIA V5.
Simple rack to put about half the desiccant beads inside the PolyMaker PolyDryer for quick drying. With only a small amount I found the airflow was good for drying completely within ~30 mins, but takes two loads. You can seeing it drying…
This is a remix of the Polymaker Cardboard Spool Adapter with a larger inner ring to fit an OpenPrintTag.org NFC sticker . Additionally, an improved version that works better with Polymaker's new spool design is available. A trimmed down…
The insert for the Polymaker Reusable Spool is just a little too small to fit a 25mm RFID such as the ones that are compatible with a Creality CFS (MIFARE 1k RFID tags which can be used with the “RFID for CFS” app) This remix knocks out…
Wasn't happy about drying Desiccant in our oven which is used for food, so I made this box for our Polydryer You turn the top to dry or empty the container as you can see in the pictures. Printes i PLA. 15% Infill 0,2 layer hight
It occurred to me that there was enough room in these dry boxes to add additional desiccant, so that the only time a re-dry would happen is on a spool change. Not sure if this is true, but we'll find out. Printed here on the Bambu X1C in…
There are 8 holes. I've used 6 myself (top and bottom row). Printable without supports. Just like in the original model you need a 90° adapter or cable. (DC 5.5mm x 2.5mm Right Angle)
This was just a quick fix, that makes this better but does not fix the problem 100%. Check out my other model for the real fix! This is a very quick fix for the Sunlu E2 filament drier. Although it is advertised as being able to use 3Kg…
This is a low investment (only about 60g each side) master spool scaled for polymaker refill spools. For me these came out as press-fit into the cardboard. I thought this design was pretty so I used it as a base despite the fact that the…
Modification of the Donor Spool Holder with Bearings, extending the length to support 5kg spools from Polymaker.
Printed from PETG / PLA 300[um] layer height low infill 15%, Required 2 units for single spool
Experienced and issue with cardboard filament spoon would hang on the Polymaker Dry Box lid protrusions and result in the spool unable to turn and cause print failure. Design the spacers to hold the filament spool away from the side of…
Dies ist ein kleiner Adapterring für Pappspulen von z.B. Polymaker oder Overture, damit diese problemlos in Multimaterialsystemen wie der QIDI Box oder dem Bambulab AMS funktionieren. Der Vorteil dieses Ringes besteht im Vergleich zu den…
A simple bracket to mount polydryer boxes directly to a printer. Requires: 2x t slot nut 2x screw 10mm or 12mm fitting in the t nut 9x pinjoint (printed) 1x bracketCenter (printed) 1x baseplate (printed) From building the prusa XL i had…
