1 / 8
polymaker polydryer printer bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
A simple bracket to mount polydryer boxes directly to a printer.
Requires:
2x t slot nut
2x screw 10mm or 12mm fitting in the t nut
9x pinjoint (printed)
1x bracketCenter (printed)
1x baseplate (printed)
From building the prusa XL i had enough spare m3nes/m4nes nuts and screws to mount everything without needing to purchase hardware.
Assembly can be done with a drop of super glue in the holes should it not press fit in.
can be printed without support from. PC, PCCF, PCTG, any other material that handles constant pressure (PLA may sag over time due to the constant compression on the screw holes and from the box on top)