Polymaker Panchroma Refill Spool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A low investment press fit Reusable Master Spool for Polymaker Panchroma Refill spools. Uses about 60g.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 144
- Makes
- 2
- Views
- 546
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This is a low investment (only about 60g each side) master spool scaled for polymaker refill spools. For me these came out as press-fit into the cardboard.
I thought this design was pretty so I used it as a base despite the fact that the sticker from polymaker has no spot on it. If someone wants to remix this with a view window and a space for the sticker that'd be great!
No support needed, just print 2 of these and press them into each side of the refill spool.
I used PETG in case I need to dry out any of the spools later. PLA can sag if put in a heat-based filament dryer.
EDIT: As I've made a few of these, 2 out of the 10 spools I've used were too loose for a press fit. I put some blue tape on the inside of the cardboard as filler and that worked great.