Counting matching models…
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
This design improves the original Bambu Lab reusable spool holder in the following ways: Allows you to see how much filament is left on the spool and uses less filament to print the spool due to the hexagon pattern on the sides. Also, the…
Print without supports, whatever type of filament you like. Unscrew the end of the SV08, slide Part A on, put the end back on, add filament, screw on cap. The cones should clamp on to the filament. There is a slot on Part A for a zip tie,…
Filament Spool Holder/Adapter for bigger filament spools. I currently use it in my Ender 3 Max. It uses a 1in wood dowel, and a 5 mm screw. I use it for 1.5 kilogram filament spools.
Print in place filament spool clamp. Printed on a Prusa MK3S, using a 0.6mm nozzle with 0.3mm layer hight, using organic supports automatically generated by PrusaSlicer.
the missing files can be found in the original model
This adapter enables you to use your old Prusament spools as a Multispool for filament refills of the “Recycling Fabrik” https://www.recyclingfabrik.com It is a sturdy and long lasting alternative to fully printed spools and the refill is…
This is connected with me being the new owner of a Bambu Labs A1 combo. Specifically, this adapter will shrink the hole in the centre of your Anycubic filament spool so that it works with the Bambu Labs AMS system. Also it has a super…
Why Use Rims? Printed rims improve the strength and reliability of cardboard spools. They also prevent the buildup of cardboard dust that can interfere with material handlers. Which Version? These models fit Polymaker 1kg cardboard…
Platform for IKEA SKADIS for the standard PRUSA filament spool holder. Print settings: Printer: Prusa Mini Nozzle: 0,4mm Material: PLA Layer Height: 0,2mm Bed Temperature: 60°C Nozzle Temperature: 215°C Infill: 100% Supports: no
if you use any enclosure or filament dryer this will be very simple and effective solution to close your printer spatially if you print ABS or similar material
Oldie, but goodie! @fargo3dprinting made in 2015. I'm still printing them! Excellent model. Author's original recommendation: Print at Standard (0.2mm) layer resolution, 50% infill, no supports. I'm able to print with 0.3mm layer and 15%…
Filament Spool Shelf brackets. I am using 7/8 wood dowels from Home Depot (but can also use 22mm stock as per the original bracket . I added #6 Flat screws holes to my design to screw everything in place. I used #6 in ¾ in size. The…
A rack to store your filaments, sized according to the BambuLab AMS specifications. Obviously it will work for any filament spool that is not bigger than a Bambu spool (which is a lot of them). Designed for quick print, easy production,…
This is my design for a filament spool holder that will fit any 20mm wide V-slot rail. You will need to drill holes for mounting either through the sides or through the top (drill from the inside when drilling through the top) Use with…
After relocating the filament spool to the top of the printer, the filament would unwind if the spool was full. This guide ensures the filament stays within the limits of the spool during printing. After a few hundred grams of filament is…
An adapter for Anycubic filament spools, specifically for use with the AMS or ACE systems. This adapter is placed around the outer perimeter of the filament spool. It ensures that the spool fits securely and rotates smoothly, improving…
The original model needs some tolerance prints to figure out the correct scale % so the bearing holders snap together. You may also want to do a tolerance print for the magnets. There are lots of tutorials on how to do this. Otherwise,…
Needed to hold a 5kg esun spool under a shelf. Found some really nice brackets from Boneswiss that i wanted to use. To mount the 5kg spool to the brackets I printed to bearing holders, one for each side. You will need to following: 2x 608…
This lets you use a keystone jack in the hollow part of a spool to give you the ability to have one end buried but still usable. This lets you re-use spools, which can be helpful because PC can be harder to recycle.
I use a side spool holder and I didn't like the filament guides I found online, so I made my own. The two brackets, one for the side, and one to go above the run-out sensor, take one of two modular pieces that can either hold this Amazon…
Measure device for Bambulab 1kg filament spool single color Print from bambulab PLA BASIC. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check th multicolor version!
Measure device for Bambulab 1kg filament spool MULTI color Print from bambulab PLA BASIC. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check the single color version!
Measure device for AURAPOL 1kg filament spool single color Print from AURAPOL PLA. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check the multicolor version!
Measure device for AURAPOL 1kg filament spool MULTIcolor Print from AURAPOL PLA. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check th multicolor version!
Organizér pro cívky Vnější d= 190mm Vnitřní d= 91mm Výška Z-V= 38mm Spool organizer-drilling je nastaven tak, aby díry kopírovaly cívku. Pro vytvoření děr použijte vrták o pr. 2,5mm, pro rozšíření 6mm. Použil jsem M3x16 s půlkulatou…
[English] I've tried various buffers and auto rewinders for MMU2S, and I finally found something satisfactory. That name is “Stronger Compact Spool Auto-Rewinder by rans”. It is great that it rewinds moderately, even if there is a lot of…
120mm, single screw fan mount for spool boxes and desiccant chambers. Version 2 has a domed center which supports the outer tower mounts better. Print with anything, cubic infill 20% or more. Please leave a “Like”, it helps me. Thank you!
Ultimaker S3 Spool Holder for generic filament. Design to be printed without support. No tool required. Clips on the Ultimaker s3. Design to be used with extra bowden on the feeding block (step motor block).
A remix of an already great spool holder to support the Creality K2 Plus for TPU printing. Printed with the long arm flat, regular PLA, 15% infill. Fits nicely on the profile edges with the top glass off. With the k2 plus having the…
Fast‑Print 3D‑Printed Desiccant Box with Infill Ventilation Grid This 3D‑printed desiccant box is designed to efficiently hold moisture‑absorbing material while printing fast and using minimal filament . Instead of traditional perforated…
it is a new version of horizontal filament holder that will fit into low spaces, thanks to the 10mm metal balls (from 30 to 50 pieces), the whole thing runs smoothly like on bearings. ATTENTION TPU/FLEX elements are not required, but we…
Most filament spools measure about 60mm in width. The filament holder in the Elegoo Neptune 4 Plus (and other Elegoo Neptunes) is wider. Usually the spool finds its way to the most misaligned position adding friction and wear. This sleeve…
I needed to lower the spool holder on my printer to clear the cupboard above it, so I made this. It's a copy of the original design, but much shorter. I don't think it will be compatible with runout sensor
I'm a big fan of the filament swatches in slide format https://www.printables.com/model/269408-filament-swatches-that-fit-in-a-slide-tray-or-caro There are lots of different boxes for this (at least here in Germany) and also very nice…
The smaller version of spool holder was designed. Total length is - 83.5 mm, and 73 mm sticks out when it's installed. I hope you will find it useful. Hello from Ukraine)) 3D printing settings Printer Settings: 3 walls - 0.4-0.42 mm 3-4…
Stackable. Holds 5 spools of wire. New version has entire front end recessed for easier stacking in front. 10cm Ruler on front. Confirmed wire spools that fit: https://www.amazon.com/gp/product/B077HRKYB1…
The cord on my plumb bob is annoyingly long, so I made this spool to store it neatly. The model was made for a 90mm long, 15mm diameter cylindrical plumb bob. A small bump at the opening keeps the plumb bob in place when it is in the…
PRINTED SOLID Sends spools with carboard instead of plastic! They do not like to roll if you're using hanging oem spool holders from prusa. Quick little hack to get the job done! -print 2 per filament roll -Pla works just fine, print at…
This part for the Qidi Plus 4 raises the height of your filament spool with 75mm for extra clearance of riser units like my own design or to use larger spools without a vented riser. It is recommended to use more walls and higher…
The plug is fully compatible with the Bambu original. The refill system is retained. As you can see at first glance, I have modified the design to one I like. Where the inspiration comes from is probably obvious right away, but it's just…
A simple spool holder made to be attached to a 3030 alumium extrusion. Which is the type of extrusion i've use for my prusa mini+ enclosure. Design is made in 2 pieces, the spool holder and a stopper that screw in the holder once the…
This is a small, 80mm diameter, 35 mm deep spool that I use for antenna wire, but I'm sure has many applications. If your printer bridges well, you can print it without support. The interior pocket uses a bridging trick to support the…
They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…
Extended rims to hold cords as long as possible on a square bed. Also added indents so it stays straight while hanging.
IMPORTANT : cut the model so its height is about 2/3 the width of the spool: Print recommendations: 0.2 layer height, 0.4 layer width random seam position or scarf seam concentric top infill
See original. Just print it two times and glue the two prints together.
Sturdy 2kg Filament Spool Holder for Prusa Mini (or Any 3D Printer!) Are you struggling with unstable spool holders when using heavy 2kg filament rolls or cardboard spools? This Sturdy Filament Spool Holder solves the problem with a…
As my printer is located on desk with original enclosure I designed side spool holder. Central cylinder is for spools with 55mm central hole. I used aluminium stick 8mm for cylinder, but also there is file for spool sticks, please use…
High load capacity and easy printing without support Bearing 1pc 606ZZ Screw 1pc M3x12 Neodymium magnets 6pcs circle 4x4 mm Neodymium magnets 6pcs circle 4x2 mm Box: Printed without support. PETG / layer 0.2 / perimeter 2x / fill 0%…
I like the modular design of FilarworKs Master Spool, but for me it was lacking some features. I wanted an area to stick a label to without it being unsupported at large portions My refill-filament was too wide for the standard…
Holds 4 spools of your large spools of thread. Can also hold 2 regular spools on one post. of you want to keep your colors on the same lines. Fits the Skadis organizer System.
The adapter is designed for 140 mm spools on an adjustable spool holder ( https://www.printables.com/model/395673-spool-holder-for-prusa-mini-flexible-no-logo ). Non-printed parts: 2 x ball bearing 608 (8 x 22 x 7) - per spool 2 x screws…
Printed on MK4s with thicker walls and 50% infill.
I took the original Python AMS spool holder and adjusted the top and bottom parts to have a better angle for different spools. The ones I was finding that were created were for specific spool types. This one should fit multiple spools. I…
Parkside welder spool bushing for PIFDS 120 B2
Description: This 3D print is an insert into full or empty filament spool which features 3 bolts and flexible parts to accommodate different tree trunk diameters. It is suitable for rolls of filament that have inner hole diameter of 50 -…
A while back I bought a set of ribbons from Amazon, but they came packaged on a piece of polysyrene. Once the ribbon was opened it ended up in a tangled mess that drove me mad, so I designed and printed a spool to hold it all. This is…
Slides onto rails: Many 3D printers, including the Ender 3, have horizontal extrusion rails. A sliding spool holder utilizes these rails to move the spool holder along the length of the printer. 1 hole for anchor bolt: This hole is…
Thanks to the ears the silica gel container fits to any spool width even if it is less high than the spool width.
Mit diesem Adapter können auch Giantarm Spulen mit einem Durchmesser von 195mm im Creality CFS genutzt werden :-) Zum befestigen einfach etwas doppelseitiges Klebeband unter die Flügel.
PLA+ Layer 0.2 infill 20% Wall 5 no Support Endstop super glue it (optional)!! at your own risk :P gift coffee money Bitcoin: bc1qx7lu8wjtka03pcagmqr8ky6nr5wt78u0x5qccu
Inspired by RepRack Spool Holder And Storage System. This design uses steel racking and “Top Rail”. Allows for filament spools to be stored directly above printers on the shelf below and does not require any drilling or wall mounting.…
Ich habe für einige Spulen einen längeren Spulenhalter benötigt. Außerdem habe ich eine 60mm Abschlussplatte angefügt. Ich habe ihn in PETG gedruckt, sollte aber mit jedem beliebigen Filament funktionieren.
Transform your space with this versatile hexagonal organizer! Designed for dual functionality, it can be assembled as a stylish shoe rack or an efficient spool holder. Each net is reinforced using broomsticks (2.4 mm diameter), and by…
I uploaded this model so other people don't have to waste an hour printing just to find out that it doesn't fit at all. I tested it as shown in pics. Works 100% with WMVos 's side mount:…
Was looking for a useful way to mount a working light on the P1S. Planning to print the side spool holder , I saw a nice opportunity to add it there. Maybe it's also helpful for anyone else. Had a clamp gooseneck lamp ( Amazon.de ) in use…
This spool organizer is fully customizable to meet all of your wire holding needs! It introduces a mounting solution, which lets you organize spools of different sizes and makes into the same system. It is also expandable, so you can…
I made this to allow me to use bigger (thicker) spools on my Qidi Plus 4 than the regular cap will allow. I hope it helps you too. Print upright with no support in any filament you like - mine is ABS using standard settings and its great…
!! This is only an axle part. because I remixed two projects that have incompatible licenses I can't publish them in one model. Get the axle here To make your drybox convertible to use 2kg spools take a look at my other model: Here you…
The Spot To Place The Sticker Does Not Align With How Much Filament You Have Left(For Everything Other Than V4) A custom filament spool Works the same way the reusable bambulab ones do and should work with them too however this is built…
Print 2 of these. Use 3 M4 heat set inserts on one and assemble with 3 M4x55-60mm screws. The v2 modifies the center hub of the spool to contain the Silica Gel holder here. https://www.printables.com/model/1125066-stronger-50mm-version
Uses 37x25x7 bearings and standard screws that comes with most enders 3 and the loadcell itself. Made for spools with 48mm center hole or bigger and max width of 120mm
2kg Spool Holder for Core One I would recommend printing it with PETG and using at least 4 perimeters to ensure it is sturdy enough. It should be assembled with 4xM3 screws. The model was designed according to:…
I designed this brackets to be used in combination with cheap 15 mm diameter metal 'central heating' tubes to make a filament spool shelf. I used one: 15 mm x 1,2 mm x 2m and cut it in half. I costed me less then € 5. Printed with PLA+…
From the first time I got my MMU, I didn't like the margarita style spool holders for the buffer, because it requires space that I do not have. I came up with this solution. It can accomodate up to 4 spools on top of Prusa MK3. I only use…
The spool easily screws together to accommodate the sample scroll. The locking feature ensures easy spooling of lefterovers from larger spools that takes up unnecessary space or samples. Measurements: Inner diameter: 70 mm Outer diameter:…
My version of spool storage bracket small yet sturdy requires 2 screws per bracket requires at least ½" x ½" aluminum or ½" x 1" wood
A replacement for the guide from the Filament Spool Holder for IKEA SKADIS with Rollers to hold a Filament Sample .
I've used this model since the first few days of having my K1 Max. I had to rearrange my print space in a way that continuing to hang spools off the back of my printer was no longer feasible. However, moving to the side mounts readily…
This is a reusable spool designed to fit eSUN 1 kg refill filament Its designed to be: Reliable and safe; wont unscrew itself by accident Easy to print Use less material than the original version made by eSUN No need for additional nuts…
A simple solution for re-spooling filament onto a spool! The re-spooler has 3/8-16 inch UNC threads incorporated into the design. Print the re-spooler wheels twice, and use a 3/8-16 inch UNC threaded rod or sufficiently long bolt with the…
Outer dia. 60mm Inner dia. 20mm Height dia. 15mm Wall thickness 1.5mm Holds around 80g of solder
2 types of Spool Clips, 1 for normal spools like Hatchbox and another for narrower spools like Amazon
Desiccant Dryer in a spool shape and size in order to dry loose desiccant in an active dry box. In my case I am using the Sunlu S4. It also doubles as a desiccant holder to maintain low humidity when the dry box is not running. The big…
ReUpload from Thingiverse, great to print and to use Simple design filament/spool holder/roller. Screw-down and glue-down versions. For assembly you need 4 bearings 22×8×7 mm. For the version with screws, 4 M3×8 mm screws.
Bearing roller for Ender3 spool. You will need to use a very good adherence to print the pin vertically. And ofc, you will need to print 2 nut models. Bearings are "skate standard" size (608zz for example). All credit and gratitude to the…
Instructions: Filament Usage Note that printing 8 “sticks” will consume approximately 570g of filament. Material Considerations Each stick is 16mm thick, largely due to the screws used. However, if you use thinner screws or adjust the…
5mm and 10mm spacers to clip onto a 1.5 inch pipe to keep filament rolls from moving around when storing them. This can be used with the Ultimate Filament Dry Box. In the picture the black colored spacer is the original.
You need to print: 2x of the arms laying flat. 2x of the rollers on one of the flat sides. 4x of the plugs with the clip touching the build plate. You may need some double-sided tape on the inside of the rollers and arms, maybe I'll make…
1kg multi spool holder Instructions: print two holders and insert a 28mm wooden dowel or any other rod. The length doesn't matter but longer is better if you have lots of spools. Printing: lay holders flat when printing and no supports…
Spool for solder wire. Size - as popular spool for ~100g (with 20mm hole) but it can handle less wire (larger internal diameter beucase of thread). Twistable. Print without supports.
Hereby I release my AIO ReFill - Masterspool aka (All In One ReFill - Masterspool). after having a lot of annoyances in the industry by companies releasing and re-releasing or resizing their refill spools I thought this is enough… so I…
![Jumbo Integrated Rewinder for 2kg Spools for (un)original Drybox [Drum Only]](https://media.printables.com/media/prints/1128144/images/8513432_593bb1d6-475e-4ace-b06c-6081c0e5e862_75880e9b-7293-4a97-97bb-4398e19ca6ce/img_1127.png)
