1 / 2
Spool Snuggy for SV08
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Print without supports, whatever type of filament you like.
Unscrew the end of the SV08, slide Part A on, put the end back on, add filament, screw on cap. The cones should clamp on to the filament.
There is a slot on Part A for a zip tie, that's to slow the roll down to one revolution by having the zip tie flick past the holder arm. EDIT: scratch that, there are times the spool gets too close and it actually causes a jam.
I used Orca slicer with the step files directly with the default sovol sv08 profile for pla.
EDIT:
Added freecad file to allow for slightly longer screw model