1 / 3
3D Printer Filament Spool Shelf
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Filament Spool Shelf brackets. I am using 7/8 wood dowels from Home Depot (but can also use 22mm stock as per the original bracket .
I added #6 Flat screws holes to my design to screw everything in place. I used #6 in ¾ in size.
The vertical uprights are cut at 9 in (or 22.5cm). The horizontal pieces are up to you… and your space.
I printed everything in the following:
Layer Height: 0.28mm
Wall counts : 4
Infill: 15% with Cubic Subdivision
Supports: Only on the lower vertical dowel section
I hope this helps