Search results: refill

Counting matching models…

ReFill System Spectrum

With this ReFill System you can store your filaments that are without the stands on the side!

Downloads: 302
Likes: 30
Rating: 4.83

PrintablesMattis

Self-Refilling Birdbath with Perch

Self-Refilling Birdbath with Perch A birdbath which keeps a consistent water level by refilling itself from an attached bottle. It has a perch on either side for the birds to sit on. Mountable with zip ties. The support needs to be glued…

Downloads: 81
Likes: 26
Rating: 0

Order a print of this model

PrintablesMatthew Neuman

Adapter for Supernote Ceramic Pen Refill

I designed an adapter for the Supernote Ceramic Nib Refill to work with a Tactile Turn Ultem Pen. This will allow you to use the refill in the Tactile Turn Bolt Action Short pen. The adapter prevents the copper coil from coming into…

Downloads: 69
Likes: 11
Rating: 5

Order a print of this model

PrintablesSamuel

Respool Spool / Variable refill spool

What this is This is a spool intended to fit large quantities of spool-less filament to respool it onto a "normal" spool. It could also be used as a variable refill spool. Through my own stupidity and a “little” accident I dropped an…

Downloads: 27
Likes: 5
Rating: 0

Order a print of this model

PrintablesH2A

Entonnoir pour parfum /petit flacon . Funnel for small bottles like refilling parfum

Allows the refilling of small bottle (like parfums’bottler of around 100ml) with a much larger bottle in a stable manner. Dimensions of usable small bottles are provided in attached pictures. Characteristics of provided G code 3D Jake,…

Downloads: 24
Likes: 0
Rating: 0

Order a print of this model

PrintablesOriental Arbor-vitae

gridfinity pen and correction tape refill holder

It is a pen/highlighter/marker and sdi correction tape refill holder that i designed. size: 1x2x7 (girdfinity unit) test printed in prusament pla, 0.15 layer height, 10% infill, and there is no need for support. ( no Z hop )(4h54m print)…

Downloads: 24
Likes: 4
Rating: 0

Order a print of this model

PrintablesJbravo88

esun refill adapter for Bambu reusable spools

Hi, I made this adapter to use the refill filament from esun on the Bambu refill spools, made these with snug tolerances so when using the AMS the filament doesn't spin freely and cause an issue. Edit: Added a new version that allows you…

Downloads: 1,132
Likes: 186
Rating: 4.82

Order a print of this model

PrintablesBrekkis

eSUN Reusable refill spool

This is a reusable spool designed to fit eSUN 1 kg refill filament Its designed to be: Reliable and safe; wont unscrew itself by accident Easy to print Use less material than the original version made by eSUN No need for additional nuts…

Downloads: 585
Likes: 57
Rating: 5

Order a print of this model

PrintablesSpectrum Filaments

Refill System Spectrum

One of the lesser-discussed challenges in 3D printing is the accumulation of empty filament spools. For hobbyists and professionals alike, these discarded spools can quickly pile up, taking up storage space and contributing to plastic…

Downloads: 264
Likes: 36
Rating: 4.86

Order a print of this model

Printablesdavinche

Supernote Refill DIY for Pilot G2 Pen

For the base, the “wider” side touches the build plate. For the “click” side, the flat side touches the build plate. No supports needed. Raft optional for bed adhesion

Downloads: 263
Likes: 23
Rating: 4.67

Order a print of this model

PrintablesDurtor

Refill Filamentspool

Filamentspool to refill

Downloads: 176
Likes: 16
Rating: 4.5

Order a print of this model

Printablesmorp

Brother P-Touch Labelmaker Refill Cartridge Organizer Trays

Yep. Just some simple trays to hold all your P-Touch sized labelmaker refills. Trays are 16xmx7cm and designed specifically to fit in these tubs. Print instructions Print flat side down. No supports necessary.

Downloads: 132
Likes: 45
Rating: 5

Order a print of this model

PrintablesTifhorn

Fiberlogy spool refill conversion

Models I have found had too long print time, so I've decided to design my own part, aiming to use as little filament as I could, so printing from leftovers was possible. It takes only ~20g of filament and is designed to be press-fitted…

Downloads: 105
Likes: 17
Rating: 2

Order a print of this model

Printableszzzy

Reusable spool for Prusament refill: simpler, faster print, plus source FreeCAD design!

A simpler, faster print, without all the hexagons. Use this with the prusament refills. Source FreeCAD design included.

Downloads: 102
Likes: 7
Rating: 3.5

Order a print of this model

PrintablesManelTo

Supernote Refill DIY for Lamy Pen

See the video:

Downloads: 72
Likes: 8
Rating: 4

Order a print of this model

Printablesgotno

Supernote refill spacer for Lamy Safari Rollerball

I made this simple model to fill up the space above the Supernote pen refill in a Lamy Safari Rollerball body. My refill snapped into the front of the body with an audible “pop!” and stayed put, but rattled back and forth a little. This…

Downloads: 65
Likes: 3
Rating: 0

Order a print of this model

PrintablesSkitzum

Lint Roller 35mm Diameter body, tested with Petlovers refills - May work with other brands

This was made for the Petlovers brand refills. I haven't tested this with other refill brands, but it may work, just make sure you measure the inner diameter of your refill, and that there is a small gap of space so the refill rolls…

Downloads: 46
Likes: 3
Rating: 5

Order a print of this model

PrintablesCrafter64

Pen - Parker style Refill, Capped

Tough PLA works best. Regular PLA can be brittle. Print with a 0.4mm nozzle max. Adaptive layer height down to 0.1mm because there's fine detail on all of the parts. The inset adapter goes behind the refill. It may be trimmed or shimmed…

Downloads: 45
Likes: 5
Rating: 0

Order a print of this model

PrintablesNathan Best

Polymaker Reusable Master Spool for Refills Adapter

I love Polymaker filmament, and when they released their Polymaker Reusable Master Spool for Refills ( https://www.printables.com/model/1477612-polymaker-reusable-master-spool-for-refill ) I was super excited, until I realized that their…

Downloads: 40
Likes: 4
Rating: 0

Order a print of this model

PrintablesBoshimanu

Supernote Half-pen Module (section-refill) for HoM 2

Hi guys, I've found this, I had a Half-pen Module (section-refill) for HoM 2 , in my drawer and I was searching for a 3d print to make it into a pen. I've found this make from @knuckles625, and I've decided to give it a try, afterwords,…

Downloads: 31
Likes: 3
Rating: 0

Order a print of this model

Printablesmslo321

Fiberlogy spool refill mod

I repaired STL file that originaly names: fiberlogy-spool-A

Downloads: 31
Likes: 3
Rating: 0

Order a print of this model

Printablesdrbakker

Refill funnel salt pepper zassenhaus

Wanted a smallish funnel for my salt and pepper mill (Zassenhaus brand). 26 grams of filament print with the wide bit at the bottom design is in mm's (slicer asked about it) printed on basic settings

Downloads: 19
Likes: 3
Rating: 5

Order a print of this model

PrintablesManelTo

Supernote Refill DIY for Lamy New Noto

Layer height: 015 Nozzle 0.4mm Solid filling:20% See the video:

Downloads: 14
Likes: 4
Rating: 0

Order a print of this model

Printablesbowenkanobe

eSUN Refillament Spool

Print 2 of these. Use 3 M4 heat set inserts on one and assemble with 3 M4x55-60mm screws. The v2 modifies the center hub of the spool to contain the Silica Gel holder here. https://www.printables.com/model/1125066-stronger-50mm-version

Downloads: 12
Likes: 1
Rating: 0

Order a print of this model

PrintablesManelTo

Supernote Refill with Faber-Castell TG1s

Layer height 15 Fill 20% Nozzle size 0.4 You'll need to cut and sand the plastic star that the ink cartridge fits into. See the photos.

Downloads: 10
Likes: 1
Rating: 0

Order a print of this model

PrintablesspectrexFPV

Supernote DIY Refill Adapter for MUJI Smooth Gel Ink Ballpoint Pen

Just the right amount of pressure: 1-to-1 clicking pressure reproduction. If your prints don't fit, it's time to recalibrate your printer! Print with brim

Downloads: 2
Likes: 2
Rating: 5

Order a print of this model

Printables

Prusament Spool to Recycling Fabrik Refill Adapter

This adapter enables you to use your old Prusament spools as a Multispool for filament refills of the “Recycling Fabrik” https://www.recyclingfabrik.com It is a sturdy and long lasting alternative to fully printed spools and the refill is…

Order a print of this model

Printables

Refill funnel salt pepper zassenhaus

Wanted a smallish funnel for my salt and pepper mill (Zassenhaus brand). 26 grams of filament print with the wide bit at the bottom design is in mm's (slicer asked about it) printed on basic settings

Order a print of this model

Printables

Nachfüllbarer Deoroller / refillable deodorant roll-on

Nachfüllbarer Deoroller Deoroller wird aus 4 Einzelteilen zusammengesetzt. Innenteil wird durch eine Gewinde nach oben und unten bewegt. Deckel und Grundkörper haben ein Gewinde um den Roller verschließen zu können. Deckel und Unterteil…

Order a print of this model

Printables

Self-Refilling 14mm D6 Stacker / Counter

This model is designed to be printed without supports. This 14mm Dice Stacker stores up to 40 dice and dispenses 5 dice at a time for easy counting. If you do make this model, please show me your makes too! Note: This model is designed…

Order a print of this model

Printables

Refill Cap for Sagrotan No Touch cover bath

🌱 Nachhaltiger Verschluss für Sagrotan "no touch" Flaschen 🌱 Mit diesem innovativen Verschluss für die Sagrotan "no touch" Flaschen ist es möglich, die vorhandene Flasche einfach und nachhaltig wiederzuverwenden. Der ökologische Aspekt 🌍…

Order a print of this model

Printables

eSUN Refillament Spool

Order a print of this model

Printables

eSUN Reusable refill spool

Order a print of this model

Printables

AIO ReFill - MasterSpool - "All In One"

Hereby I release my AIO ReFill - Masterspool aka (All In One ReFill - Masterspool). after having a lot of annoyances in the industry by companies releasing and re-releasing or resizing their refill spools I thought this is enough… so I…

Order a print of this model

Printables

Premium DIY Refillable Cat Scratcher Boxes

Turn leftover cardboard into mess-free cat scratchers with these 3D printable scratcher boxes! Designed to hold cardboard strips tightly without glue, this collection of 4 premium templates make building cat scratchers fast and clean.…

Order a print of this model

Printables

Ribbed Attractive Hand Soap Sleeve / Container for Muji 400 mL PET Refill Bottle

A container for a Muji pump dispenser. 67.5 mm x 67.5 mm interior Refill Bottle. Main body is 107.77 mm tall. Size are for the volume. Hole in the bottom for water drainage. I can make some other sizes on demand if people find it useful!

Order a print of this model

Printables

Scrubbing Bubbles Fresh Brush Flushable Refill Pads Storage Tower (10 Pads)

This organizer holds a full 10-count refill pack and is designed to sit neatly next to your Fresh Brush wand and stand. The 40mm wide opening allows you to easily grab a single pad directly with the wand — no more fumbling in drawers or…

Order a print of this model

Printables

Mini+ Sized Hexagonal Spool for the Prusament Refill System

This is a remix of the "Hexagonal Spool for the Prusament Refill System" model so that it fits on a Prusa Mini+.

Order a print of this model

Printables

Refill Hopper for Wentai SMD Organiser Boxes

Easily slots into the single Wentai boxes. Just tear open your SMD strips right over it and watch the 0805 resistors go straight in the box and not fly all over the place.

Order a print of this model

Printables

Spool adapter to reuse cardboard spool with Bambulab refills

I had a stack of empty cardboard spools from Eryone and wanted to reuse them for my Bambu Lab filament refills. I came across the excellent Cardboard Spool Ring and Clamp designed by @Mikhail , which worked well — but since the internal…

Order a print of this model

Printables

Creality Refill Spool (Using Prusa spool)

Print all three part. Separate the Prusa sides from the cardboard tube. Insert the male and female screws into the Prusa sides from the inside (see photo). Rotate as needed for the key to align with the slot. Insert the spacer into the…

Order a print of this model

Printables

Reuseable Spool for the Prusament Refill System Wider Holes for AMS Lite

Remix of the reusable spool for the Prusament Refill System with enlarged holes for the Bambu Lab AMS Lite. The new holes have a diameter of 53 mm, as the original 51 mm holes were not large enough for the Bambu Lab AMS Lite, which…

Order a print of this model

Printables

Minimal filament refill spool - 80 g

This is my new filament spool. Version 3 update: made the spokes a bit stronger. It is super light: uses only 80 grams of PLA (use PETG to be able to put into the dryer), prints quickly (2.5 hours on a Voron) and assembles without screws.…

Order a print of this model

Printables

Refill Funnel Adapter for FLUX RF800 (50 ml Bottle)

This funnel adapter is made for clean and easy refilling of the FLUX RF800 50 ml bottle from larger containers (e.g., 1 L). It reduces spills, speeds up refills, and improves handling at the workbench. Key feature: fits the 1 L cap…

Order a print of this model

Printables

Reusable Filament Spool for Refill Filament

This is a reusable 3D-printed filament spool designed to be used with refill filament coils , which are usually cheaper and produce less waste than filaments sold with disposable spools. I designed this spool because, although some…

Order a print of this model

Printables

Brother refill bottle adapter

funnel print with PETG/PLA supports on Gyroid infill 15% Plug print with TPU Gyroid infill 15%

Order a print of this model

Printables

Nespresso vertuo refill and sceal helper

This vertuo cup holder help you to refill Nespresso Vertuo capsule. Yous can buy " Aluminum Lids for capsules pods " Available at AliExpress or other inline resaler. You can use the upper section to press the lid on the capsule to get…

Order a print of this model

Printables

FIlament refill spool. Works best for prusament.

A printable refill spool. Best for use with prusament.

Order a print of this model

Printables

eSun Refill Spool

Very easy and quick print for eSun refill spools. No overly complicated locking system, just push and attach each side. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…

Order a print of this model

Printables

SAGROTAN NoTouch Refill Lid

Don't throw your money on expensive refill items and enable you to refill using unbranded soap instead by drilling one arbitrary sized hole and after refilling cover it with this lid.

Order a print of this model

Printables

gas refill adapter

gas refill

Order a print of this model

Printables

Gridfinity Mechanical Pencil Holder with Lead Refill Storage

This compact Gridfinity module is designed to securely hold a mechanical pencil while providing a dedicated compartment for lead refills. The dimensions are measured precisely for a clean, accurate fit, and the low‑profile design keeps…

Order a print of this model

Printables

Detoll refill cap

Detoll soap refill cap Fits the Detoll cap perfectly Printing time: approx 20 minutes Material: PLA Nozzle: 0.4 mm Supports: not required; gluing the base plate is recommended for extra stability AMS: not required, could be paused and…

Order a print of this model

Printables

Refillable Spool for ELEGOO refills - Snapmaker U1 and Bambu Compatible

Tested on the Snapmaker U1, should work on the BambuLab A1/mini AMS units too.

Order a print of this model

Printables

Refill Spool from eSUN cardboard spool

Easy print that allow you to convert an empty eSUN cardboard spool in a refill spool. Compared with a fully printed spool, this is faster to print, do not requires big printing beds and consume less plastic. Required hardware: only 16…

Order a print of this model

Printables

Polymaker Reusable Master Spool for Refills Adapter

Order a print of this model

Printables

Adapter for old Sunlu refill filament

I ordered some refills for the Gen1 spools as they were on sale and then found out, that Sunlu changed to incompatible Gen2 and then to Gen3 within two years or so. :( As i now have some empty Gen3 spools, it was time to use them for the…

Order a print of this model

Printables

Reusable Spool for Sunlu 500g Refill Filament

I recently bought a Sunlu refill set (4 x 500 grams) and couldn't find a reusable spool for it. So here's one. :) It's important that it's printed with (at least) PETG, not PLA. Otherwise, it won't be stable enough and will warp or break…

Order a print of this model

Printables

Cat Scratcher Bed – DIY Refillable Cardboard Inserts

Give your cat the last scratcher bed you’ll ever need to buy. This refillable design lets you replace the cardboard anytime, so you never have to keep buying expensive scratcher refills. Simply roll cardboard strips and place them into…

Order a print of this model

Printables

MasterSpool for Spectrum refill filaments (83 mm center bore)

MasterSpool for 83mm Spectrum refill filaments printable on 18cm bed.

Order a print of this model

Printables

Dog Bowl Water Bottle Refill

Printing the section that hooks on the dog bowl on its side reduces supports needed and printing across the stress point of connection with the bowl stops it from breaking along layer lines under the weight of a full 1.5L bottle. Dovetail…

Order a print of this model

Printables

Printer Poop Collector,Recycle Your Bambu Lab Refill Box |

Magnetic Holder for Bambu Lab Refill Boxes – Printer Poop Collector This magnetic holder allows you to reuse the cardboard packaging from Bambu Lab filament refills and turn it into a practical container that can be mounted directly on…

Order a print of this model

Printables

Variable Master spool variable for all refill sizes V2

V2 of the original spool Your fully variable Master Spool comes here. (Please read all before printing!) This spool's USP : If you choose a new refill manufacturer that uses a different diameter for its refills, you’ll only need to print…

Order a print of this model

Printables

Prusament Spool to The Filament by Spectrum Refill Adapter

This adapter allows you to reuse an empty Prusament spool as a holder for The Filament by Spectrum Refill filament. To install it, simply disassemble the original Prusament spool, place one adapter piece on each side, and fasten them…

Order a print of this model

Printables

coffee capsules refilling tray for K-fee, Aldi, Tchibo, ...

This Refilling System is reusing the coffee capsules from K-Fee, Aldi, Tchibo, and similar. The empty capsules fit snugly in tray and can be easily filled with ground coffee. The spoon hold 7.45g of coffee beans to be ground to fill a…

Order a print of this model

Printables

Ypsomed - Ypsopump Insulin Refill Behälter

Ich habe hier einen kompakten Behälter konstruiert zur Mitnahme einer Glaskarpule und einer AAA-Batterie. Gedruckt habe ich es mit Silk-PLA mit Dual-Color. Die Schichthöhe beim Drucken habe ich auf 0,1 mm gestellt. Damit funktioniert das…

Order a print of this model

Printables

Parker Pen Refill Holder x6

I typically carry a few colors and styles around in my backpack, so I made this holder to allow me to safely bring them wherever I go. Refills that fit standard Parker style pens snap snugly in place, but are easy to remove. There is no…

Order a print of this model

Printables

Isopropyl Alcohol Spritzer Refill Funnel

Isopropyl Alcohol Spritzer Refill Funnel This is a small, loose-fitting funnel I created specifically for Meijer store-brand isopropyl alcohol spray bottles, but the dimensions may work well for other brands. The funnel is designed to…

Order a print of this model

Printables

Labels for Refilled Prusament Reels

Printed with PLA. On the Core One + it works good on .20mm balanced with 20% infill. Prints fast. May wish to have a dark filament print on top of a lighter color for even better contrast. I printed mine solid orange.

Order a print of this model

Printables

Reusable Spool-Remix for Overture Refill and Filament storage Rewinder

Material doesn't matter much. I printed this with eSun PETG at 235C, bed at 80C, .2mm layer, 20% infill, .8mm wall and top and bottom.

Order a print of this model

Printables

Filament Holder for BIQU Panda Station (Refill or Spool)

Filament Spool or Refill Holder for the BIQU Panda Station UPDATE JULY 2026 : Now holds either a Refill or Spool V7 Recently got a couple of Panda Stations from BIQU and printed their filament holders for the drawers in the cabinet, which…

Order a print of this model

Printables

FormFutura Quick Role Side Panels for Refill Spules

This was designed to need as low material as possible while giving a quick chance to fix the end of the material without the need of any helper that is not where you need it ;-)

Order a print of this model

Printables

Epson Eco Tank refill holder

Needed a quick little hanging bottle holder for our Epson Eco Tank printer at the shop. Whipped this up and attached with 3M VHB tape. Hope it helps someone else. It is a little snug, if you want them loose enough to fall out, scale it up…

Order a print of this model

Printables

Funnel for refillable Keurig K-Cup pods

Your morning is challenging enough before you've had your coffee, and you don't need wayward coffee grounds making it harder. The convenient handle helps get your morning off to just that little bit better start. Print upside down without…

Order a print of this model

Printables

Prusament Spool Refill Adapter

I had some empty prusament spools and refill from a different manufacturer that didn't fit the prusament spool due to differing diameters. So I replaced the core of the spool to fit this other refill. Separating the prusament spools was…

Order a print of this model

Printables

Cat Litter Locker Refill Holder

Litter Locker replacement cartridge that's easier to refill and hold 3rd party bags. Onshape Design:…

Order a print of this model

Printables

Zebra F refill to Fisher pen adapter

About This is for Fisher, Rite-In-The-Rain, and other retractable ballpoint pens that are designed to use a PR4 refill. I don't know if is needed in non-retractable pens like the Fisher Bullet pen. Without the adapter, Zebra F refills sit…

Order a print of this model

Printables

Master Refill Spool

About This is a lightweight universal reusable spool for refills that screw together and center the refill core, using thin flexible tabs. They're used for centering but not to fully hold the spool so make sure you screw the two spool…

Order a print of this model

Printables

Python Refill Spool

About This is a universal reusable spool for refills that screw together and center the refill core, using thin flexible tabs. They're used for centering but not to fully hold the spool so make sure you screw the two spool halves tightly…

Order a print of this model

Printables

Thermacell Refill Adapter (Durable)

Most Thermacell adapters are fragile because of the middle pin being so very thin. This version solves this problem by using a small piece of filament inserted into the middle hole. Fasten with e.g. CA glue. The tolerances are very…

Order a print of this model

Printables

FormFutura ReFill Systems

Introduction: ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum. Find out more about…

Order a print of this model

Printables

STAEDTLER White Board Marker Refill Stand

This was a fun little project to refine some of my ultra basic fusion 360 skills. Here you have multiple stands for the Staedtler White Board Markers and their refill jars. I made them in various forms, to fit as many as possible…

Order a print of this model

Printables

Prusament Spool to Recycling Fabrik Refill Adapter

Order a print of this model

Printables

Miele Ultraphase (non-refillable container) funnel

Unlock the convenience of refilling your Miele Ultraphase 1 & 2 detergent containers with this specially designed funnel. Tailored to fit these non-refillable containers perfectly, this funnel simplifies the refilling process, allowing…

Order a print of this model

Printables

Bambu Lab AMS Rear Desiccant Refillable Tray - Easily dryable

I made this remix to make the holder dry the desiccant efficently. With a better chance for airflow. No support needed.

Order a print of this model

Printables

Funnel for Refilling Miele Twindos Bottles

Funnel for Refilling Miele Twindos Bottles Save money and reduce waste with this custom-designed funnel, specifically made for refilling Miele Twindos detergent bottles. Miele’s Ultraphase detergent bottles can be expensive, but with this…

Order a print of this model

Printables

Nespresso Vertuo Pod Refill & Seal

Three separate part models includes the base, funnel/sealer & the taper/plunger. See photos for assembly. Print settings. Printed on a Bambu Labs P1S Filament: Polymaker PLA White Marble, Temp: 230F (the black specks tend to clog the…

Order a print of this model

Printables

Gridfinity 4x1 Plier Stapler bin, with 12 refills slots

Order a print of this model

Printables

AzureFilm Filament MasterSpool for Refill - New

For the new refills with holes in cardboard. My master spool is compatible with AMS Lite, if someone tests it with AMS I'm waiting for feedback.

Order a print of this model

Printables

Bird feeder spoon. (Throug bar feeder refill spoon)

Pretty simple spoon to refill bird feeder throuhg bars (half inch spacing or 10-12 bars or wider) Sample print on the photos made from PETG but I think PLA would be ok too I did not use supports for the sample and it is ok, however I…

Order a print of this model

Printables

Litter Funnel to Refill Tidy Cats 20[lbs] Plastic Container with 40[lbs] Cardboard Boxes

Funnel to Refill Tidy Cats 20[lbs] Plastic Container with 40[lbs] Cardboard Boxes… its easier to fill litter box with 20[lbs] container instead of awkward 40[lbs] cardboard box of litter It screws onto the top of the plastic container,…

Order a print of this model

Printables

Water Refill for Thedford SC400.

Water Refill for Thedford SC400. In case you have loosen your refill nozzel for your water toilett in your caravan/camper here the printable replacement. I found some spare desing's on other plattforms but they dos'nt fit on my toilett. I…

Order a print of this model

Printables

Adapter for Uniball Jetstream Refills in Zebra F-701 Pens

The Uniball Jetstream SXR-80 refill lacks the metal sleeve that the Zebra F-701 pen refill usually comes with. This adapter aims to provides a reusable and repeatable solution for the Jetstream refills to replace the Zebra refills.…

Order a print of this model

Printables

Parametric Tray for Wallflower Refill Storage OPENSCAD

Designed to be a more complete, more flexible tray creator. Requires the Chamfers-for-OpenSCAD add on. https://github.com/SebiTimeWaster/Chamfers-for-OpenSCAD

Order a print of this model

Printables

Kingroon Refill Spool

The filaments from Kingroon are affordable and affordable products that show moderate quality. I wanted to buy a Refill product and utilize a Refill Spool made by someone else because I didn't want to waste it, but now I realize that the…

Order a print of this model

Printables

Pet Water Fountain Filter refillable - Fofnon brand

I didn't want to buy the over priced filters for my pet fountain so this is the solution I came up with. There is a photo of the fountain above and I will add a link below. I recommend using PETG for printing this model bc of how well…

Order a print of this model

Printables

Sagrotan/Dettol NoTouch Refill Adapter – easy twist & refill (no drilling)

Very simple and easy refill-adapter for Sagrotan/Dettol NoTouch soap. no drilling or adding parts to the container needed – the soap container stays unchanged. Simply install the Adapter to the refill bag. It fits the 12,3 mm thread of…

Order a print of this model

Printables

Clamp for Recycling and Reusing eSun Spools for Filament Refills

If, like me, you might have a handful of empty eSun spools. This clamp allows you to use refills without needing the dedicated eSpool from eSun. Simply cut the spool in half, insert the refill filament, and clamp the spool together using…

Order a print of this model

Printables

Meridol toothpaste refilling tool

Meridol toothpaste refilling tool designed for travel size 20ml and 75ml tube (EU version available in CZ,SK,HU). No waste and clean refill process. My printing setup: Material: Prusament PLA Nozzle diameter: 0.4 mm Layer height: 0.1mm…

Order a print of this model

Printables

Meridol to BE YOU 10ml toothpaste refilling tool

Curraprox BE YOU 10ml toothpaste refilling tool. Designed to refill with Meridol 20ml or 75ml tube (EU version available in CZ,SK,HU). No waste and clean refill process. My printing setup: Material: Prusament PLA Nozzle diameter: 0.4 mm…

Order a print of this model