1 / 2
SUNLU Refill Spool (V2) Adapter for Recyclingfabrik Refill Filament — image 1
1 / 2

SUNLU Refill Spool (V2) Adapter for Recyclingfabrik Refill Filament

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter for using Recyclingfabik Refills on SUNLU Refill Spools

Rating
5 / 5
Likes
152
Downloads
915
Makes
15
Views
5,426
Reviews
18

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Share Alike

Hallo zusammen,

da ich viele leere, blaue SUNLU Refill-Spulen (V2) habe und keine Lust hatte, für die verschiedenen Farben der Refills von der Recyclingfabrik extra Spulen zu drucken, habe ich mit Fusion 360 einen Adapter entwickelt, um dieses Problem zu lösen (Anfängerskills). Leider passen die Refills von der Recyclingfabrik nicht einfach auf die SUNLU-Spulen. Mit Hilfe des Adapters konnte ich den Umfang und die Distanz anpassen, sodass die Refills nun passen.

Für die Montage benötigt ihr keinen Klebstoff und keine Schrauben, da der Adapter mit dem bereits vorhandenen Drehverschluss funktioniert. Beim Drucken müsst ihr nichts Besonderes beachten. Ich habe den Adapter mit einem Standardprofil, einer 0,4 mm High Flow Düse und einer Schichthöhe von 0,25 mm in Generic PLA auf meinem Prusa MK4S gedruckt. Es wurden 2 Perimeter, 15 % Infill und Stützen nur auf dem Druckbett verwendet. Der Druck wiegt ca. 48 Gramm, einschließlich des Supportmaterials.

Ich hoffe, euch gefällt der Adapter! Wenn ihr Verbesserungsvorschläge habt, lasst es mich gerne wissen.

--------------------------------------------------------------------------------------------------------

Hello,
since I have a lot of the blue SUNLU refill spools (V2) and didn't feel like printing extra spools for all the different colors of the refills from the recycling factory, I developed an adapter for this problem with Fusion360. (Beginner skills)
Unfortunately, the recycling factory refills don't just fit on the SUNLU spools. With the help of the adapter, I was able to adjust the circumference and distance so that the refills fit.
You don't need any glue or screws for installation. The adapter works with the existing screw cap.
You don't have to pay attention to anything special when printing. I printed the adapter with a standard profile 0.4 High Flow nozzle, 0.25mm layer height in Generic PLA on my Prusa MK4S. 2 perimeters, 15% infill and supports only on the print bed.
The print weighs about 48 grams including support material.
I hope you like the adapter, if you have any suggestions for improvement, please let me know.

Tags