Counting matching models…
Needed a spacer to take up the gap between the cardboard and the spool. This is for Bambu Spools that fit the AMS and Microcenter Inland filament refills. I printed from PETG with 3 walls and 20% infill, PLA should work fine.
This adapter allows perfect fitting of Fiberlogy Refill filament bundles onto Bambu Lab Reusable spools, or self printed spools that have the same size and notch as those of Bambu Lab. It has cut-outs to allow the tie-wraps go in and cut…
Introducing Refill Masterspools, the ultimate solution for 3D printing filament. With over 16 years of experience in 3D printing and product development, we at 3DP have created what we belive is the best refill masterspool. Our focus on…
Tested on the Snapmaker U1, should work on the BambuLab A1/mini AMS units too.
Background I kept on experiencing the dreaded "AMS assist is motor overloaded" error when I used certain filaments (Inland spools, Inland refills with Bambu spools, and sometimes with Sunlu spools). I noticed that the filament would get…
I made this holder because I thought 12$ for one was rather exorbitant, so I bought 12$ worth of smells instead and made my own holder. STEP files are included so you can customize for your car if you so wish. A slide-on sun visor clip is…
The Uniball Jetstream SXR-80 refill lacks the metal sleeve that the Zebra F-701 pen refill usually comes with. This adapter aims to provides a reusable and repeatable solution for the Jetstream refills to replace the Zebra refills.…
The FILM Spool: Reusable Master Spool for AzureFilm Refill Filaments Tired of disposable plastic spools? Inspired by the classic look of a film reel, I redesigned the AzureFilm Master Spool to be 3D printed and perfectly compatible with…
A small case with a lid that holds up to three refills of Wild deodorant.
glo koš do auta na použité náplně / glo car bin for used refills + obal na glo Hyper Pro (model G6100) / glo Hyper Pro cover (model G6100) - https://www.printables.com/model/1269854-obal-na-glo-hyper-pro-model-g6100-glo-hyper-pro-co Pokud…
Outer ring is sized at 178mm (as I only have a Mini to print), nothing special if you already have some empty rolls of Prusament. Base part has similar nubs which press into the cardboard and the top part threads into place. Outer ring is…
I designed this spool to fit a 75mm D3D Sigma filament refill using minimal filament to make. The slots in the outer spool make it easy to load the filament before cutting its zip ties. The SCAD files are included to provide a starting…
Using the odder reducing diaper trash can systems offered by Tommee Tippee you are facing a lot of costs for the refills. Or you can get a refill for Angelcare/Closer to nature/ Sangenic nappy bin cassettes (…
This is a simple pen! It's light small, and feels great in the hand. It's about the size and diameter of a Parker Jotter, but much much lighter. The CAM for the bolt action has been refined over a plethora of iterations to create…
This adjustable spool is loosely based on Felix’s design: https://www.thingiverse.com/thing:4640225 with substantial modifications. The basic 60mm wide model is simple with only 5 different plastic parts (you will need multiples of most)…
I never though I'd love a pencil so much as the Pica-Dry. So I bought 2… This wall mount holder fits 2 Pica-Dry 3030 pencils with space for 5 refill packs. The refill pack space is stepped so you can always see what colors you have.
I couldn't find a body that would fit standard Uni PowerTank SNP-10 refills so I tried to design my own. I have included a version of the body that is split into a Tip and Barrel, with threads attaching the two parts together. Be very…
A holder for two brushes and two unpretentious OralB refills
Tray for your collection of Copic VariousInk refills. This design works for the new (~2022) bottles, previous bottles had a completely different shape. Fits up to 50 bottles. Includes feet you can glue to prevent the tray from sliding…
This was made for the Petlovers brand refills. I haven't tested this with other refill brands, but it may work, just make sure you measure the inner diameter of your refill, and that there is a small gap of space so the refill rolls…
About This is a simple bolt-action pen that I made. Uses Ballograf Original refills, and an M3 heat inserts for attaching the “handle” into the bolt for cycling the action. This is made to be printed also with a 0.6mm nozzle, so…
yuur cat can probably tip it over so i have it fasted to the window with a clip that fits around the bottle new and improved. now easier to clean! WOW this simplified design prints faster by not having super thick walls. mostly drawn for…
I love Polymaker filmament, and when they released their Polymaker Reusable Master Spool for Refills ( https://www.printables.com/model/1477612-polymaker-reusable-master-spool-for-refill ) I was super excited, until I realized that their…
holes for clip will fit m3 and m4
The Bacofoil Easycut cling film dispenser is a good product, but the refills are not available in my local supermarket, and they only seem to come in packs of 3 or more on Amazon, which is vastly more cling film than most people need to…
I created this case for my Wild deodorant refills. It's compact, uses less material than V1, has a tight closing lid and fits 2 refills. It mirrors the design of Wild's new deodorant cases which have rounded corners. Printed this using a…
The Nappy-Bin-Refills are a bit more voluminous than other and did not fit in the original design. So I made it new from scratch without the hooks and with inner space increased from 22mm to 26mm. Print Settings Printer: FIashForge…
Pusher for Fiberlogy Refills(850g) on Bambu Lab Spools. Thanks @Morius for sharing the original design. You need to use it with “ Bambu Lab - Spool Adapter - Fiberlogy Refills ”, thanks @Flight777 for sharing this design. You find both…
Gridfinity 4x1 Plier Stapler bin, with 12 refills slots
Remixed techam's upcycling nut & bolt-system to work with some additional spools. I included the original and unmodified bolt for simplicity. The follwing spools are available for MasterSpool upcycling and are tested to work with…
If, like me, you might have a handful of empty eSun spools. This clamp allows you to use refills without needing the dedicated eSpool from eSun. Simply cut the spool in half, insert the refill filament, and clamp the spool together using…
I post two versions of spools: One with full closed side which prints fastest. Another with partly open sides. This in four colors, MMU or AMS needed. The shims fit perfectly, I carried them over from original. One crucial improvement is…
Remixed from Gilles160 , based on the previous work from zoltanf , Chrismettal - Binary-6 , w00h , misterT , Sonic_2_1 & Lichtjaeger . Thanks to these great creators for making something that I could remix. For me the 46mm Adaptor was not…
The adapter allows older 800 g refills to continue being used on the new 1 kg master spool. It consists of two parts so that it can be printed with as little material as possible. Large disc: Can be printed without infill and without a…
I recently purchased Airwick Freshmatic automatic freshener. When it ran out, I picked up some re-fills which were more affordable than the same brand. Unfortunately, the replacements were short in height and wouldn't work. I took it to…
Print Settings Printer: FIashForge Dreamer Rafts: No Supports: Yes Resolution: 0.1 - 0.3mm dynamically Infill: 30% Filament: PLA white Category: Household Supplies
Hi, I've seen a lot of burst refill spools recently. I wanted to avoid this with my first refill and modified a multi-spool by inserting 3 holes for locking screws. (I usually only use one screw though) As with most other solutions, the…
I had some Sunlu filament spool laying around and wanted to mount a spool of DAS Filemant in it.
This model is a reusable spool designed specifically for Bambu Lab filament refills. The spool is split into two halves, making it easy to assemble and disassemble whenever you need to reload new filament. To secure the two parts…
printable filament spool. designed to work with the bambulab AMS. twist lock has a built in ramp to pull the sides together for a tight fit. Mine have been more durable than the ones that they provide. View our Etsy Shop:…
I had a stack of empty cardboard spools from Eryone and wanted to reuse them for my Bambu Lab filament refills. I came across the excellent Cardboard Spool Ring and Clamp designed by @Mikhail , which worked well — but since the internal…
Holds 2 packs of harry's blade refills upright. Fits perfectly for 0 wobble, but not too tight for any friction.
Vileda Handi Dish Brush Refills are $1.60ea and i can make them for $0.36 $0.21 for the sponge and $0.15 for the print
Adapter for Das Filament refills to fit the Sunlu V2 Spool. Remix from 3DPrintscher, who made the design to fit the refills from Recyclingfabrik. Check the original here: LINK
I have printed this (great!) spool holder, but I had some “Recycled PLA” refill, which is completely loose when installed in that holder: So I quickly designed this spacer: Whose internal diameter is 81mm and the external one 99mm . I…
Filament refills are more and more common but the cardboard tube size is not standardized and MasterSpool designs waste a lot of filament. TubeSpool is a parametric model made to be adapted to all tube sizes. Based on the design of the…
Modification of last spool to fit dasFilament 1kg refills. Just print without support. you might need a brim. New Version V3: better fit, faster print, so support needed
This clamp system lets you reuse an old spool with a spool-less refill. You'll need: An old spool (plastic or cardboard) w/ a 25-65mm hole; Two 3-5mm tie-wraps, length should be at least 2x the spool's width + 45mm. Instructions: Print 2…
Need to transfer liquids into small bottles or containers with tiny openings? I designed this mini funnel to make the job mess-free. It is perfect for refilling travel bottles, soap dispensers, or handling refills (see images for usage).
Simplisitc and very easy to print. Fits larger hands. Holder for standard ISO G2 ballpoint pen refills that are usually too floppy to be used without a holder (pen). The refill just clicks in place. ISO G2 refills come in many giveaway or…
This extension builds directly onto my previous Spool/Refill/Leftover holder design, specifically targeting the reuse of empty plastic Elegoo spools. If you frequently use centerless filament refills, you know that keeping the coil…
so the pen broke but there are still lead refills left. the kids don't need them anymore but they were too expensive to throw away. the tip clamps the lead as it is screwed into the handle with the somewhat compliant design. i would…
modification of last-spool-main to fit 1kg refills from Recyclingfabrik. We use it with out old zortrax spools. New Version V2: better fit, better bed adhesion
It holds one of those thermal paper rolls that you use with the cheap Amazon instant cameras.
My lint roller handle broke, so I designed a replacement that prints as a single part. The refill slides over the spindle and clicks behind two hooks at the tip. The hooks have a square catch face, so the roll stays on while rolling and…
I had a stack of empty cardboard spools from Eryone and wanted to reuse them for my Bambu Lab filament refills. I came across the excellent Cardboard Spool Ring and Clamp designed by @Mikhail , which worked well — but since the internal…
Tested on the Snapmaker U1, should work on the BambuLab A1/mini AMS units too.
I love Polymaker filmament, and when they released their Polymaker Reusable Master Spool for Refills ( https://www.printables.com/model/1477612-polymaker-reusable-master-spool-for-refill ) I was super excited, until I realized that their…
Značkovač pro tištěnou cívku na refilly od 3D FOX / Marker for printed spool for refills from 3D FOX Pokud se vám bude model líbit, tak budu rád za ukázky vašich výtisků.
yuur cat can probably tip it over so i have it fasted to the window with a clip that fits around the bottle new and improved. now easier to clean! WOW this simplified design prints faster by not having super thick walls. mostly drawn for…
Screwing reusable spool for prusament and bambulab refills
