Pusher for Fiberlogy Refills on Bambu Lab Spools
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
"Pusher" for Fiberlogy Refills(850g) on Bambulab Spools. It compensates the height difference between the Refill / Spool
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 29
- Makes
- 1
- Views
- 296
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Pusher for Fiberlogy Refills(850g) on Bambu Lab Spools. Thanks @Morius for sharing the original design.
You need to use it with “Bambu Lab - Spool Adapter - Fiberlogy Refills”, thanks @Flight777 for sharing this design. You find both parts in the attached orca slicer 3MF.
The Pusher compensates the height difference between the Refill and the Bambu Lab spool.
! Cut the zip-ties only if you have locked the Spool!
Filament: ASA (or other heat resistant materials)
Print settings for the Pusher (also see attached orca slicer 3MF):
- Printer: Bambu Lab X1C
- 0.6 mm Nozzle
- layer height: 0.24
- wall generator: arachne
- wall loops: 3
- Top/bottom layers: 0
- infill: 20% honeycomb