Spool spacer (for 100 mm diameter refills)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This spacer is intended to fit 100mm refills into 80mm spools.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 1
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I have printed this (great!) spool holder, but I had some “Recycled PLA” refill, which is completely loose when installed in that holder:
So I quickly designed this spacer:
Whose internal diameter is 81mm and the external one 99mm.
I guess I could have made it smaller, as it has printed in near 2h using an Ender KE.
I made that “I” shape to save filament and weight, as the reel would sit on the external sides of the spacer.
The height is 59mm between flat faces.
Once I printed I can say it feels quite hard to install.
There is a v2 of ~57mm height and 83-97 diameters, but note the one I printed is the v1 and it works. I don't know why, but Fusion360 did not allow me to create 1mm chamfers, so I did a 0,4mm ones instead.