Spool spacer (for 100 mm diameter refills)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This spacer is intended to fit 100mm refills into 80mm spools.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I have printed this (great!) spool holder, but I had some “Recycled PLA” refill, which is completely loose when installed in that holder:
So I quickly designed this spacer:
Whose internal diameter is 81mm and the external one 99mm.
I guess I could have made it smaller, as it has printed in near 2h using an Ender KE.
I made that “I” shape to save filament and weight, as the reel would sit on the external sides of the spacer.
The height is 59mm between flat faces.
Once I printed I can say it feels quite hard to install.
There is a v2 of ~57mm height and 83-97 diameters, but note the one I printed is the v1 and it works. I don't know why, but Fusion360 did not allow me to create 1mm chamfers, so I did a 0,4mm ones instead.