Adapter 1 kg Masterspool --> 800 g Refills
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple adapter to use old 800 g refills on the new 1 kg masterspool.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 23
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The adapter allows older 800 g refills to continue being used on the new 1 kg master spool. It consists of two parts so that it can be printed with as little material as possible.
Large disc: Can be printed without infill and without a top layer. The side without the top layer will later face the spool flange.
Sleeve: Is placed onto the spool after the large disc. One side has cutouts that allow the filament to be secured inside the core of the new 1 kg master spool. For this reason, the sleeve must be installed in the correct orientation (as shown in the image).
In total, printing the adapter requires only about 60 g of material.
For more informations, check our blog post: https://www.dasfilament.de/blog/adapter-neue-1-kg-masterspool-alte-800g-refills