Adapter 1 kg Masterspool --> 800 g Refills
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple adapter to use old 800 g refills on the new 1 kg masterspool.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The adapter allows older 800 g refills to continue being used on the new 1 kg master spool. It consists of two parts so that it can be printed with as little material as possible.
Large disc: Can be printed without infill and without a top layer. The side without the top layer will later face the spool flange.
Sleeve: Is placed onto the spool after the large disc. One side has cutouts that allow the filament to be secured inside the core of the new 1 kg master spool. For this reason, the sleeve must be installed in the correct orientation (as shown in the image).
In total, printing the adapter requires only about 60 g of material.
For more informations, check our blog post: https://www.dasfilament.de/blog/adapter-neue-1-kg-masterspool-alte-800g-refills