Lint Roller Handle, Snap-On, One Piece (37 mm core, 100 mm refills)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement lint roller handle that prints flat in one piece with no supports. The refill snaps on over two hooks and sp
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 7
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
My lint roller handle broke, so I designed a replacement that prints as a single part.
The refill slides over the spindle and clicks behind two hooks at the tip. The hooks have a square catch face, so the roll stays on while rolling and does not slide off under pressure. To change the refill, pinch the two tips together and pull the roll off.
Fits refills with:
Cardboard core inner diameter: 37 mm
Roll length: 100 mm
Measure your refill before printing. If the roll is longer than 100 mm, the hooks will not reach past the end and will not hold it.
Features:
One piece, no assembly, no cap to lose
Prints flat on its side, no supports
Hanging hole in the handle
Size: 238 x 46 x 20 mm
Print settings
Material: PLA (what I printed it in). PETG also works and gives the hooks more flex.
Layer height: 0.2 mm
Perimeters: 3 or more
Infill: 15 to 20 %
Supports: none
Orientation: flat on its side, as oriented in the STL