1 / 2
Lint Roller Handle, Snap-On, One Piece (37 mm core, 100 mm refills) — zdjęcie 1
1 / 2

Lint Roller Handle, Snap-On, One Piece (37 mm core, 100 mm refills)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement lint roller handle that prints flat in one piece with no supports. The refill snaps on over two hooks and sp

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
7
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

My lint roller handle broke, so I designed a replacement that prints as a single part.

The refill slides over the spindle and clicks behind two hooks at the tip. The hooks have a square catch face, so the roll stays on while rolling and does not slide off under pressure. To change the refill, pinch the two tips together and pull the roll off.

Fits refills with:

  • Cardboard core inner diameter: 37 mm

  • Roll length: 100 mm

Measure your refill before printing. If the roll is longer than 100 mm, the hooks will not reach past the end and will not hold it.

Features:

  • One piece, no assembly, no cap to lose

  • Prints flat on its side, no supports

  • Hanging hole in the handle

  • Size: 238 x 46 x 20 mm

Print settings

  • Material: PLA (what I printed it in). PETG also works and gives the hooks more flex.

  • Layer height: 0.2 mm

  • Perimeters: 3 or more

  • Infill: 15 to 20 %

  • Supports: none

  • Orientation: flat on its side, as oriented in the STL

Tagi