656 models
Finger Brace (splint) Suitable for broken or dislocated middle segments and fingertips, or for post-surgery recovery of these body parts. When elongating the brace in the slicer (scaling it up in the longitudinal axis) so it extends to…
Wrist brace (splint) - a lighter version A lighter and less rigid brace, suitable rather for relieving pain caused by a sprained wrist or post-surgery recovery. Not suitable for fractures. Use undercast padding, fixated with velcro straps…
Finger extension brace (splint) Suitable for treatment of injured extensor in the fingertip (i.e. “mallet finger”). Total fixation period of 6 weeks. Also suitable for fractures of the fingertip, which lead to the same symptom - finger…
The base model is a size 10 and I went through and did test prints to get as close as I could to general ring sizes to make things easier for folks to print. You may need to adjust as you see fit for shrinkage and other things but as it…
Wrist brace (splint) for either hand A more rigid brace, suitable for broken wrist treatment, i.e. fracture of either the adjacent radial bone, ulnar bone, or wrist bones (excluding the scaphoid bone fracture, which requires fixation of…
Palm brace (splint) For fixating the wrist and palm (metacarpal fractures). The brace must be shaped into a neutral position, to prevent the shortening of tendons and ligaments and placed on the FRONT side of the forearm (see picture). If…
Designed to fit 'KONIZY' refills from Amazon , which are 100mm long, with an opening that is 38mm wide. I believe this means it will fit most standard refills, Ikea and most Scotch-brite included, though I would measure first. (EDIT: It…
Pinky finger/thumb brace (splint) Suitable for fractures of the fifth metacarpal bone, to stabilize injured ligaments of the metacarpophalangeal joints (between fingers and a palm). Depending on the length, it can be also used to fixate…
Go to https://www.patreon.com/lilykill to support the original creator. Materials selection: Handle - I recommend a wood-filled PLA, but not the Bamboo powder ones. They're too light. I used a walnut filled PLA to get a darker finish,…
Fred Flintstone is one of my favorite childhood cartoon characters. Fred was modeled in Blender, sliced using Simplify3D and printed in ABS on a FlashForge Creator X. I also used a GeckoTek plate to ensure perfect adhesion of the parts to…
This splint prints flat and can be easily molded to perfectly fit your wrist with a little heat (hot water, heat gun, oven, etc.). It is designed to comfortably immobilize your wrist, preventing ulnar and radial movement, while still…
This splint will help your dog or cat to recover of a limb injure. In order to produce it you will just need to print the provided file, and attach some velcro fasteners to it. In case you need to adapt any of its dimensions, I will also…
I injured my finger while climbing, so I designed this splinter to stabilise the finger for better recovery. It aims to stabilise the finger, so that tendons can recover. Please note that im no medical expert whatsoever, so please use…
The Flintstones are one of my favorite childhood cartoons. Dino was modeled in Blender, sliced using Simplify3D and printed in ABS on a FlashForge Creator X. If you have the proper filament colors, no painting is required. The model is…
Big toe brace (splint) Not suitable for walking! The brace is neither sturdy nor comfortable enough for that - only for fixation, but without stepping on the injured foot. For pain relief from non-dislocated fractures of the first or…
Lint Lifter! A handy tool to clean the charging port on your phone, laptop, or other electronic device. This is a useful tool that prints in about 8 minutes! Inspiration I printed the tool from fifindr on printables, and I thought it…
Wilma, from the Flintstones cartoon show by Hanna-Barbera. The Flintstones cartoon takes place in a romanticized Stone Age setting, depicting the lives of the Flintstone family and their best friends and neighbors the Rubbles. Wilma was…
Pebbles, from the Flintstones cartoon show by Hanna-Barbera. The Flintstones cartoon takes place in a romanticized Stone Age setting, depicting the lives of the Flintstone family and their best friends and neighbors the Rubbles. No…
Glinthawks are easily the most annoying machines. But someone has to clean up all the scrapped watchers, so I guess I'm thankful for them anyways. This machine is to scale with the official board game and stands on a 30mm base. It is…
Flintlock Pistol for Carnival On the search for a matching gun to my carnival costume, I was unfortunately not found. So I created myself from several models that I could find myself a suitable. And have designed this beautiful Flintlock…
This is a shortened dryer lint vacuum attachment to clean out lint that gets past your dryer lint trap. I just did it on my Samsung dryer and got a little bit out that looked kind of old so I'm glad it's clean in there. I used my older…
This is a remix of an older model by Mieszko Lacinski . I did some cleanup of parts that didn't fit together, and modified for easier printing. Separated the dragon head at the base of the hilt into it's own piece. Combined some of the…
Giant Brick Pirate Flintlock Pistol (x10) Print two part and two join
Finger splint I created to treat a mallet finger injury. Has a slight angulation to promote extension of the distal interphalangeal joint while healing. G-code is for PLA and includes removable supports.
This was a project for a familie member with finger arthritis were the splint.brace you can buy didn't fit like she wanted to. Printed with a Resin from Siraya tech mixture Tenacious / fast mix 1:6 STL-files “Brace 1,5 mm v3” is 45 mm…
The collection container solves the problem of the low drain height. The container was designed so that all the water can be drained at once, and it's still possible to lift the tray without spilling anything. A slightly smaller version…
This is based on the island from The Legend of Zelda: Link's Awakening, a game that is getting a remake soon. Inspiration and idea for this project came from Miniworld, who graciously let me realise it as I got excited about it. Whole…
The Flinty Benchmark is 37.8mm tall, contains bridge infill, unique overhangs, bed adhesion & more . Yabba dabba do it! Added a rotated version to check cooling on the other axis. Easy to print, hard to print perfectly. If Benchy is level…
A splint designed for small birds, can change dimensions in the slicer to fit most bird legs. Put a small amount of fabric between the birds leg and the splint for a comfortable fit. I recommend using self adhesive bandages as they don't…
After overbending my thumb (Doctor thinks it was dislocated for a second, and some ligaments are damaged), i had to somehow stop it from doing the same movement again. After printing in PLA, you can heat the splint in boiling water and…
Simple print in place bobbycar trailer splint to prevent the trailer from disconnecting. No tools needed, only print them out and break the connection line between splint and secure bolt. Usage : Attach the splint, move the hinge, done.…
I designed this. printed the handle in two parts and used the pin to help hold it together. I ended up printing this at 80% so that it fit my hand so you may want to check that out. Everything printed fine and fit together no issues.…
Remixed model to fit normal upright vacuums instead of overpriced battery powered handheld Sharks Tested on a Eureka Airspeed Unlimited Rewind vacuum 200mm tall Printed at 40% infill Gyroid 4 walls PETG Should fit all standard household…
Easy to print, no supports needed.
This simple splint was designed to keep my right pinky finger straight while the tendon healed. Printed in PLA Meta 0.2mm layer height and a brim for support. I've included the STEP file to allow for customization. Sorry about you or your…
Fred Flintstone, from the Flintstones cartoon show by Hanna-Barbera. This is a onepiece version of Fred Flintstone based on my multi-part Fred Flintstone model that I've previously posted. I teamed up with maker/designer rebeltaz (Derek)…
Within the cultural tapestry of the Red Sith, the ceremonial flint knife holds a pivotal role as a revered artifact in the intricate rites of passage known as "Vein Racing." or in some family lines as “Sithlume Ascension” This ceremonial…
Meet Flint, the miniature dragon with a heart of gold and scales of burnished bronze. Though small in stature, Flint possesses a mighty spirit, tempered by the wisdom of ages past. His sleek, streamlined form belies his strength, and his…
A workmate needed this for his childs ... he said it fits well I recommend you the flat lying version. Please share your prints! :)
Dino, from the Flintstones cartoon show by Hanna-Barbera. This is a onepiece version of Dino based on my multi-part Dino model that I've previously posted. I teamed up with maker/designer rebeltaz (Derek) for this project. See his work…
PLA filament After printing you should shape it to the finger
Nothing like hurting yourself and needing a finger splint, only to find that commercial finger splints kinda suck. This finger splint was created for splinting the first knuckle, allowing for improved comfort and dexterity while your…
Adds 5/8" clearance to stock clips Somebody who made something similar: https://www.thingiverse.com/thing:1599265 Ikea: https://www.ikea.com/gb/en/p/metod-leg-40205599/ Category: Kitchen & Dining
I designed this for my middle finger that had pain in its PIP joint. The rough dimensions of my finger are labeled in the screenshot that I took (it says “m” for meters, but it's really mm for millimeters—Blender is weird). I recommend…
Splinter from Teenage Mutant Ninja Turtles.
Pebbles Flintstone, from the Flintstones cartoon show by Hanna-Barbera. This is a onepiece version of Pebbles Flintstone based on my multi-part Pebbles Flintstone model that I've previously posted. I teamed up with maker/designer rebeltaz…
BamBam Rubble, from the Flintstones cartoon show by Hanna-Barbera. This is a onepiece version of BamBam Rubble based on my multi-part BamBam Rubble model that I've previously posted. I teamed up with maker/designer rebeltaz (Derek) for…
Remixed this design https://www.thingiverse.com/thing:3007637 to be able to print the handle with the base one the build plate without the need for supports. I was able to leave the tabs on the model after printing with no issues so far…
Dino the Dinosaur: The Flintstones
This model is compatible with the lego system.
Wilma Flintstone, from the Flintstones cartoon show by Hanna-Barbera. This is a onepiece version of Wilma Flintstone based on my multi-part Wilma Flintstone model that I've previously posted. I teamed up with maker/designer rebeltaz…
made by Dr. Brett Carey and engineer Ben McCandless originally to benefit patients without health insurance. Measure the diameter and length of a patients wrist and re-size accordingly. Use the mirror function to turn this into a left…
A very slight modification of Heybulldog 's remix of Mushogenshin 's wonderful bust of the great Serbian (or American) inventor Nikola Tesla. Heybulldog used v3 for her remix, and so this is what mine is also based on. Thanks Heybulldog…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Add these wings to your track saw when cutting in a new splinter guard. The wings will let you get to the edge of your track to cut the entire new splinter guard. Can secure to your track with M3 screws. Countersunk screw holes in top if…
A collection of finger splints from approximate sizes 3 to 13.5 in increments of .5.
clip for PVC kitchen Plinth ( kick board ) f3d and step files are included clip2.stl is longer grab and little stronger gcode is 40x on bed with draft setting Print instructions standard profile no support is needed
Even if my physiotherapist said it's cool, it's not a certified medical device, but it worked for me. It's a light splinter that I designed for a jammed finger in order to avoid hitting stuff and feeling pain. It printed really fast, just…
When you suffer from arthrosis, like myself, a finger splint can bring some relief. But most splints in the market are ugly, stupid and way overpriced. Also: they come only in standard sizes and are far from comfortable. So I decided to…
I hurt my finger and I'm too cheap to buy a finger splint so I just modeled and printed one. this is to be taped on.
This is a finger splint designed to prevent the last joint of your finger from bending. it is used for my mom's pinky after she cut her extension tendon. Skinfriendly tape is used to hold it in place. For my moms pinky I scaled it to 87%.…
I needed to clean the lint trap in my dryer so I made this vacuum attachment for my Shark brand lift-away vacuum to reach. It fits the Shark Lift-Away vacuums, or any vacuum that takes accessories with a 39.5mm OD. This attachment is…
Ideally print in PETG rather than PLA for more elasticity, tree supports suggested.
Protection pour doigt, inspiré du modèle proposé par Mr. E Menace. Ajout de perforations latérales Augmentation de la protection au niveau de l'ongle Longeur 65 mm ; diamètre 26 mm
Just added a lip on the top surface of filimonic's anti-splinter device design for a more secure fit.
Based on the flint and steel from “A Minecraft Movie”
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I discovered that my LG Dryer had a build-up of lint under the "Dryer Lint Trap". This two piece vacuum attachment will reach the bottom and suck out the lint. This fits a 1 1/4 inch vacuum hose. Printing: .2 mm with 3 perimeters and brim…
We needed our plinth to be higher than the standard 8 cm Ikea plinth. So we got a wooden plinth from another supplier. Only problem was that the clips that came with the Ikea plastic legs were sticking out 3-4 mm to far, so the plinth…
an easy, one-piece print to complete your pebbles flintstone costume, should you so desire. A friend of mine has red hair and wanted to go as pebbles flintstone for halloween, this presented a golden opportunity for me, since i have a 3d…
I use gloves size L. Use heat gun or hair dryer to soften the material and press to fit. Apply rubber bands or hair ties to hold in place as shown in the picures.
The total print time is about 14 hours. Support is needed. Glue is needed to fix the model togeether. Use PLA (I use GD Filament PLA). Printer: Prusa MK4 or Bambulab X1C (for the 3mf file). Nozzle: 0.4 Layers: 0.2 Walls: 2 Infill: 10-15%…
Purpose: This is a replacement for a Festool jigsaw splinter guard. Reference to original part: Festool article-no.: 490120 Fits to PS 300, PSB 300, PS(C) 400/420, PSB(C) 400/420 Comments: The splinter guard shown in the title was the…
*** Thanks for checking out this model! If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Recently I found myself singing: “I fought the saw and the..saw won. I fought the…
A simple case for your IKEA busts lint roller. To travel, or to have at home. The idea came after travelling for work, having to take a lint roller with me, since my dog's white hair would always be stuck on my nice clothes. Travelling…
Welcome to the LINT-stones car, the latest addition to my garage! This prehistoric beauty is a 3D printed masterpiece, complete with all the stone-age style and charm you'd expect from a Flintstones vehicle. But what really makes this car…
Eher kleines Modell für eine Fingerschiene. Sie kann in heissem Wasser weich gemacht und am Finger angepasst werden. Material: PLA Massive Schichten: 0 Konturen: 2 Schichthöhe: 0.15 Infill: 20% Füllmuster: Bienenwabe
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Lost your IKEA Bästis lint roller handle? No problem! This easy-to-print handle fits perfectly with IKEA Bästis lint roller rolls. Perfect Fit: Designed specifically for IKEA Bästis lint roller rolls. Quick Print: Simple design for a fast…
I printed these in PLA. They are a bit hard to get on but stabilize well..
Made this as a demo for Boolean operations when teaching 3d printing
Finger splint. It needs some sort of tape to hold it tight on your finger, but that allows your finger to slide in easily to hopefully make it more comfortable. All the models uploaded are the same, but some people prefer different file…
This is a wall-mount bracket for the GL-iNET MT6000 Flint 2 router. While the router does come with mounting holes, this: Offsets the router from the wall an extra 8mm to allow cables to go through a wall pass-through and be routed…
Double wood door with wood frame for the Gloomhaven board game. Some of the actual door tiles in the board game are double doors. This is a remix of robagon's wood double door to fit in Xevin's door frames, which I have adapted to some of…
Single wood door with stone frame for the Gloomhaven board game. This is a remix of Xevin's wood door and fits in his door frames, which I have adapted to some of my other posts. I wanted a stone lintel instead of a wood lintel, so I made…
Thank you bsurfn99 for your design! I have added a few holes to prevent moisture accumulation. I have also increased the length by 28% for the first try. The best fir for my finger was a X and Y scale of 125%, depending on the selected…
15% infill, no supports needed, layer hight 0.2, Prusament Galaxy Black PET-G used. Made by Hodinový Maker
I bashed my finger in a car door. I kept reharming it by using the finger. This thing goes over the end of the finger and reminds me not to use it, and also adds a little protection if I do. The ID is 17.7mm, and the inside length is…
This is a quick and simple print for the outer corner of the plinth´s of ikea method kitchens. Fits with friction, but can supported with some glue. Printing details Print with given orientation no supports needed Layer height 0.3
fits perfektly on the ikea lint roller print the handle on one of the sides, should be good without supports. I printed the other part on its side. If you look on the picture on the right side with supports for the thread. Happy printing.
Makita 192557-6 Anti Splintering Device. Replacement of the original 192557-6 Makita part. Slicing note: Initial layer height : 0.1 mm Layer height : 0.1 mm Wall line count : 0 Infill : 100% STEP included. Version history 22.12.26.02 :…
Das Flintstone-Mini-Catapult besteht aus den folgenden Einzelteilen: Rahmen Federn (2 bis 8) Achse Wurfarm Steinen (so viele wie nötig) Drucke diese Teile aus. Besser mit langsamen Druckgeschwindigkeiten drucken, gerade die ersten Layer.…
box for dental braces or dental splint.
A print in place lint roller. (Fusselrolle) I lost my "real" one somehow, so I made a 3D printed one. It should fit the standard sticky rolls from the supermarket. (37,8 mm core). I desigend it with a bit of flex, so 1-2mm give or take…
Some support is needed. Some glue is needed for the door and the chimney. Printed on Bambulab X1C. I added the 3mf file - for orientation and support. Walls: 2 Infill: 10-15% Layers: 0.20 Colors: House, Chimney - PLA marble (GD Filament)…
A simple splint to hold a finger straight.
I really liked the design of Zswickliffe's dryer nozzle for their Dyson vacuum. I needed a different base, so I used the OpenSCAD file from Max's Dyson V6 hose attachments model to model a reasonably close approximation. Zswickliffe's…
