4,950 models
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Upgrade your brush-cleaning routine with the Hairbrush Cleaner ! Featuring fewer, wider combs for a more robust and efficient cleaning experience, this…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Keep your drains clean with this simple but super-effective 3D printable drain cleaner snake! Designed with fine hooks and a slim, flexible profile, it easily slides through most drain grates to grab hair and debris — no need to remove…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
I recommend heat, bending and curving the flower piece a bit for easier fit. My next hair clip. Previous Bee & Honeycomb Slide Hair Clip is here
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
Epic hair pin for fasion or cosplay uses. This is my second addition to hair pin models first one was uploaded on Thingeverse: https://www.thingiverse.com/thing:4945469/files or on Prusaprinters:…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
A cute little bow for your hair! Just loop a hair-tie through the back, slip it through itself for a knot, and it's ready to wear! Includes two versions. One with ribbon tails and one without. Printing recommendations: 4mm Nozzle, .2mm…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant
A fun little flower at a cute size (under 5 cm in diameter) that can be used as a hair accessory by sliding a standard bobby pin into the provided slot. This is a quick and easy print (no supports required), and comes in at under 6 grams…
Print approx. €0.81–€1.00 excl. taxPreliminary estimate for one variant
The Hairbrush Cleaner Mini is a compact tool designed to remove tangled hair from your brushes effortlessly . This smaller version of the original Hairbrush Cleaner uses less material , making it lightweight and travel-friendly – perfect…
Print approx. €0.50–€0.62 excl. taxPreliminary estimate for one variant
HAIRY Brush - Mini Modeled after our HAIRY Brush line , the mini version packs all the features the big ones come with and is here for you to try out for FREE ! More information about the whole set and its features you will find under…
Print approx. €1.26–€1.55 excl. taxPreliminary estimate for one variant
Here is a modular hair claw clip with 3 different claw. The system is very simply. Improvement: With V3, you don't need support on the clamp, and you still need it on the clip.(in prusaslicer you should set the overhang threshold to 35…
Print approx. €4.49–€5.48 excl. taxPreliminary estimate for one variant
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for PETGSource material: PET
Fern can be seen wearing this in her hair througout the show. There are two versions: Curved - Requires supports. glue on a hairclip and your good to go. Flat - Easier to print. If you are using PLA, you can put it in hot water an and…
Print approx. €4.83–€5.91 excl. taxPreliminary estimate for one variant
I designed a version of this game that prints easily without supports or bridges. Assembling is fun and feels great. The honeycomb structure allows for many different configurations with just one chair design. I printed the chairs from…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Resized to fit the Sylvania family bunnies this sofa chair prints well, looks soft, and adds a ‘lived in’ look.
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for one variant
I always forget to put my hair straightener away while I wait for it to cool down. Plus I wanted to have it always handy but not creating clutter. So I designed this wall mount! Hope you find it useful as well!
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
Version 1: The part is a single print and snaps in place to make the hair clip complete. To make it work even better you can bend the middle part a little bit. Version 2: This part is the solution when snapping the legs in place doesn't…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
A Chair Wheel stopper originally designed for the Secretlabs Titan. The Wheel have an diameter of ~61 mm and a with of 55 mm. The stopper has 2 embedded holes for 10x2 mm magnets for organisation and 4 holes for 10mm silicon feet to…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
Are you still looking for Easter decorations? Here you will find it. Here I have drawn an Easter egg which I have provided with a fuzzy skin in the slicer. I have printed it in three sizes, simply increase the scale of the object: small =…
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
Use M10 nut ans screw to assemble
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Miniature director's chair. Printable without supports and in two colors by simply changing the filament (in height) in the 2 fabric areas. The original size is: 73mm (height) x 47mm (width) x 35mm (depth). You can use supports or accept…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Modell I made a piano with a Kikkerland Musicbox for my big girls godchild. The challenge was to create a realistic keyboard and not a flat or even glued-on one like you find on many other toy pianos. But on the other hand, the music box…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Large Butterfly Hairpin for an updo. No supports necessary.
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
Triangle hairclip. Printed out of Prusament Galaxy Black PLA. It may be printed using PETG for strength. Happy printing!
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
I created this solid model from a Popular Mechanics template from their July 2006 edition. I've made many of these Adirondack chairs at 1/10th scale on a Prusa Mk3s+ 3D printer. I print it out as individual components and assemble using…
Print approx. €2.22–€2.72 excl. taxPreliminary estimate for one variant
Wahl-Style Hair Clipper Insert Size #2 (6mm) Print instructions Do not use supports. Print flat, with text up. Post processing: There is a 0.2 wall attaching the tab on the back to the sides. You need to cut that with an X-Acto knife.…
Print approx. €1.03–€1.25 excl. taxPreliminary estimate for one variant
Vicha 2025, solo 14 gramos. Hair Band 2025, only 14 grams
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
I saw an instagram video showing a star clip, and when I tried to find the model online, I was not able to find it, so I made it myself from scratch! Print in PLA, 90% infill, and enjoy your 44min print :)
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Those feet have a 70° degree of freedom to accommodate the angles of the MH500 chair from decathlon . Perfect for wet grass or uneven terrains. In PLA. The ball part has a full membrane on the bottom for easy printing. Use painters tape…
Print approx. €1.97–€2.40 excl. taxPreliminary estimate for one variant
Enables easy movement of heavy furniture and protects hard floor from scratches. Countersunk hole is designed to house the head of a 4mm wood screw. The top of the screw head sits ～2mm below the surface so it can't touch the floor. On…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Cat hair fork. 100% infill, Prusa Mini 0.15 Quality preset.
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
Lucky 13 Mandalorian head If you like it --> press like it :-) a chair for lucky 13 perfect size, also a chair with a hole to the base arms
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
another requested hair pin for Halloween (based on the Soul eater scythe)
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET
Summary Stopper for office chair for simracing and flightsimulators. Due to the round design, there is no need to adjust the wheels orientation. The model is fully parametric. A list of all variables and their default values: d_wheel =…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
I hope you like the model. The beach chair has two drawers where you can store small folded banknotes for e.g. can fit in the next vacation. Unfortunately it is not yet printable in multiple colors, but this will be added later in the…
Print approx. €7.38–€9.01 excl. taxPreliminary estimate for one variant
Miniature accessory | Miniature | Diorama | Miniature Scene | Doll House | Vintage Customize the dimensions for your miniatures. For a more precise print without supports, I recommend printing in two pieces and then gluing them together.…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
A comfy maybe bit cursed chair Print it with whatever you like, i printed it myself with PLA. You need to resize the model to 60% in order to fit to the normal size of the Dummy 13. You can also of course change the size as you like.…
Print approx. €2.82–€3.45 excl. taxPreliminary estimate for one variant
Layerd STL file for printing, once it's printed you'll need to bend it slightly to fit around your hair with the stick. Printed in PLA with 2 color changes at a 0.2mm layer height.
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant
This is a replacement fan blade I made for a hair dryer that had some blades broken. As its dimensions may not fit your needs, I will share with you the SLDPRT file so you can edit them your own. Preferably to be printed with PETG or…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for PETGSource material: PET
This is a wearable, printable replica of the iconic Squid Hairclip from Splatoon. It's the headgear piece you can get from the Inkling Girl amiibo. To make this, all you need is Black, White and Green PLA, a (large) hairclip, and…
Print approx. €0.45–€0.56 excl. taxPreliminary estimate for one variant
This chair is designed in Fusion360. The dollhouse chair is very easy and fast to print. Position the chair on left or right side on print-bed and there is no need for supports. I printed the one in photo on my Prusa Mini+ with 0,4mm…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Too lazy or cheap to buy a replacement gas cilinder for you Ikea Markus? Print this stopper to prevent the dreaded sag. Easy to print and in one piece for you to not waste your time. I printed in PETG to prevent warping with extensive…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for PETGSource material: PET
Printed without supports Glued together
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Scythe style hair pin for Halloween
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
I designed this chair for my daughters barbie house. I printed it using PLA. For fastest print time and best result I recommend having the chair lying on its back with the back rest flat to the print bed. I used a brim which worked well,…
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
Printing I use 4 parameters to make the threads solid. Seams I chose to place randomly, to not make it weaker in one spot and to keep negative aesthetic impact low. I used snug supports to keep the cavity for the seal clean; it's easy to…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
I designed these feet to protect a wooden floor from the metal-pipe legs of a couple of chairs. With the exact angle of the legs, the base of the feet is flat on the floor, reducing the risk of damaging the floor. Update 2025-08-06: This…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
Print all 3 files with 100% infill and in a material that is suitable for outdoor use. E.g. PETG.
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Design Intent I wanted to make hair pins for my wife and daughter with a butterfly shape. The spiral hair pins are somewhat easier to use and hold well in place without much work on the hair side. The straight pin can be put in a bun…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
A table with chairs for ‘critters’ with tails. Our dollhouse is inhabited by Sylvania Family-sized bunnies and this set was built for them. Around a 1:16 scale, the chairs print with minimal supports. The design allows the critters to sit…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
Plastic Rebar Chair Spacer 35-40mm. Print use PETG or ASA or other technical plastic suitable withstand the UV and higher mechanical strength while steel mesh is heavy.
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for PETGSource material: PET
Original Description: "We made this curved octopus for a sculpture at our hackerspace, and one of our artists added a paintbrush and started wearing it on her hair. I posted it to Facebook that night, and had a bunch of girls tell me "I…
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for one variant
It has a little give juist like the real chair! not as comfy though… Also check out Elitail version. Printing Material PLA Nozzle 0.4 (basic) Generate support On Overhand threshold 35º Support Style Organic Support on build plate only On…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
This is hair band with changeable decoration.
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
Use case This is my 2 Harry Potter themed hairpin , it goes for both men and women. Impression For more solidity I recommend printing in PETG. Please give this design a like if you like it, or post a photo of your branding, it really…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
This model is done in Shapr3D. Trying this app on my Ipad. I still didn’t have time to print it since I am on vacation. I will do so once I get back to my printer. I hope that someone will surprise me by posting photo in comment earlier!…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
Functional and stylish, I designed this hair dryer holder to serve a practical purpose in our bathroom while also adding in a cool and retro 1950s aesthetic. I printed with four perimeters for strength, but only time will tell if the…
Print approx. €7.07–€8.64 excl. taxPreliminary estimate for one variant
An insert to the bathtub, to keep the hair out of the drain. Fits the standard swiss drain. I include the step file so you can adapt it to your needs. Included .gcode files use the honeycomb infill. Play around to make it as you like!
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
An elegant and functional hair stick designed for creating both quick and intricate hairstyles. The model features a minimalistic and elegant design . Its lightweight construction allows for easy and secure hair fastening without causing…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
The original hair catcher hangs deep in the drain in the water, which I found very unpleasant, so I designed this hair catcher so that the sieve and the hair can dry and it is perceived as more hygienic. The part was created with FreeCAD.…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
This are some hair curl making device in 3 diffrent sizes, but if u hang them in the wind they can also make some stunning visuals, especially with clear Pla. I built this model inspired on the human protein Cell. Yeah i know it might…
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for one variant
Story: The hair clip of my gf broke and I promised her to 3D-print one for her. I have used the old spring of her hair clip, but apparently, you can also buy one . You need to print the upper and the lower part with minimal support. 100%…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
A simple, good looking hair comb for your haircare needs. Recommended settings: Layer height: 0.1-0.15 mm Nozzle size: 0.4 mm Perimeters: 2 “Avoid crossing perimeters” setting: ON Infill: 100% Filaments used in showcase (All PLA): Ivory -…
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
The castor is from the Guitel brand specifically for office chairs with a universal stem, The repair was necessary for two reasons, because some of the wheels on my chair stopped turning and the appearance no longer looked as if it were…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Simple wall mount for cone shaped hair dryer with open front to allow dryers with certain front attachements to slide in. The upper diameter is 84mm, the lower diameter 74mm. Height of the part is 40mm. The FreeCAD design is also attached…
Print approx. €3.35–€4.09 excl. taxPreliminary estimate for one variant
A nut for Carp chair with M24 thread. Printing instructions Becase there is plastic thread, I recommend printing with toughter material (ideally ASA ). I used ABS , because that's what I had at hand. Maybe you can try to add perimeters .…
Print approx. €2.77–€3.38 excl. taxPreliminary estimate for one variant
My prints are massive PETG to cope with the weight on the small surface. Haven't tried infilled variants yet.
Print approx. €5.29–€6.47 excl. taxPreliminary estimate for PETGSource material: PET
Can be used as a keychain, car pendant or other decoration. Was by us for a colleague, where it is now hanging in the car. We printed it on the Prusa MK2 using the following settings: PLA (addnorth PLA) First layer 215° then 210° Heated…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
This is 3D printable snap hair clip with MAGNET for ornaments. It is a variation of my original model https://www.printables.com/model/432517-snap-hair-clip. Video: https://youtube.com/shorts/TSiQW08WzcY Magnet: I recommend neodymium…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
I used it as a stand for a cute crochet figure my partner made. After printing plate_1, it's recommended to test the slate tightly fits, and adjust plate_2 if needed. I didn't use glue. Update: v1.1 has a shorter base, which looks nicer…
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
The chair consists of multiple modular parts, including support frames and seating slats, which are printed separately and easily put together. Feedback is welcome to help refine the design! Print Settings : Printer : Prusa MK4S Material…
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
A hairy Spider with a special appendage.
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant
This is a remix of “Just a hair band” by Raybo with a small improvement for kitty lovers:-)
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for PETGSource material: PET
Hairy horse lamp using 5050 RGB LED Strip, it based of Hairy horse model from Thingiverse ( https://www.thingiverse.com/thing:2185497 ) Head gcode is for PLA, Stnad is PETG You will need led strip (I use RGB 60led/m with remote controlel)…
Print approx. €5.28–€6.45 excl. taxPreliminary estimate for PETGSource material: PET
I designed this part to stop my office chair from always collapsing to the bottom due to a failed gas lift mechanism. I found that the new mechanisms were not lasting very long, and at any rate I always wanted my chair at a fixed height.…
Print approx. €7.20–€8.80 excl. taxPreliminary estimate for one variant
1. Reinforced Hair Dryer Mount: Infill of 50% No Supports 6 perimeter shell layers I recommend getting some sticky felt and adding it to the top of the whole mount along with the interior side and bottom of the small arm to prevent…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Now that my daughter had enough tables for her Playmobil bar (see https://www.prusaprinters.org/prints/106944-playmobil-table ), chairs were of course still missing. So Dad had to do it again ;-) It is a two-part print that can be put…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Mount and bracket allowing you to use a cheap laser crosshair with your laser cutter (in my case a Creality Falcon 10w) to aid in setting up parts for engraving and cutting, this is especially useful when doing repetitive work, it also…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
This model snaps into the hairband, printed using small layers for the snap to be the right size and with a brim, but no supports necessary. This was really fun to design, I had to trace the arc from the band and attach the supplied snap…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Print it slowly and use with wooden stick to hold it on hair. Should be worn according to the photo.
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for PETGSource material: PET
This strainer is easy to print and can be used in conjunction with the sink drain stopper. I printed it in PETG, however should also work with other materials. There are three different sieve types with different drain diameter offered.…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
This is a headband featuring a spinning dreidel (sevivon) for your next Hanukkah party! The dreidel is removable from the headband and will spin by itself, so you'll always be ready for a quick game! Update 2022-12-25: There is now a dual…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Design chair, student model of the third year of carpentry, co-author is Eliška Pospíchalová, supportless printing, Designová židle, studentský model třetího ročníku oboru truhlář, spoluautorem je Eliška Pospíchalová, podpěry nejsou třeba
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for one variant
More miniatures see Collection
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
These are the hairpins that gym leader Iono wears in Pokemon Scarlet. Unfortunately these do not float, but they're cool to have around. Also, as a dude with short hair, I can't really use these. Also, this means I can't really test them…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
I have an office chair that is very comfortable, but has a pneumatic cylinder that wants to lower the chair when I don't want it to. Since I usually use the chair in the top position anyway, I figured that I would create a brace that…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for PETGSource material: PET
Hello, I have a brake for a swivel chair for you - it won't move . It's for a swivel chair for the office or living room. It's for a wheel size of 60x60mm, so you can enlarge / reduce it as needed. Suitable for a racing simulator or a…
Print approx. €5.77–€7.05 excl. taxPreliminary estimate for one variant
Print it out as it and glue it together with superglue (PLA is just fine) Vytiskněte a slepte vteřinovým lepidlem (PLA je dostačující)
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Two colors hairpin. No MMU required-only filament change on specific layer Material: PLA, PET-G, ABS etc. Layer high: 0
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Use case This is my hair clips remix, it goes for both men and women. Impression For more solidity I recommend printing in PETG. Please give this design a like if you like it, or post a photo of your branding, it really makes my day! Good…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
My camp chair has hard arm rests and didn't come with a drink holder. So I've created one that folds up when not in use. Camp chair is a Boab brand. Prints in place and depending on your printer tolerance and accuracy, you may require…
Print approx. €10.19–€12.46 excl. taxPreliminary estimate for PETGSource material: PET
A festive set of seven hair sticks designed in a minimalist yet elegant Christmas style. Each type features a slightly different shape inspired by the holiday season, making them perfect for festive occasions. The models can be lightly…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
A toy to print for your children and grandchildren. A simple table and a chair assembled in 2 parts. No supports, 15% infill. The dimensions : 60 mm x 94 mm for the square chair. 94 mm x 90 mm for the table Feet can be printed separately…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
This is an adapter to connect a standard 22 mm CPAP tube to a Conair Testarossa hair dryer. Printing instructions Print the .stl file as-oriented. There's not a lot of surface contact area; you may have first layer adhesion issues…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for PETGSource material: PET
This is useful if you have an office chair with casters and you want it to stop rolling around for some use or other, and also don't want to swap the casters only temporarily. You can stand a few of the casters on the blocks so that it…
Print approx. €3.44–€4.21 excl. taxPreliminary estimate for PETGSource material: PET
The arm-rests on many Ozark Trail camp chairs are held in place by a fabric strap. This has a tendency to wear out and break loose. This clamp is placed below the arm-rest to hold it in place. My work is all free forever. If you want to…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET
I have an old house with an old bathtub. Unfortunately, I also have old plumbing, so, I really want to keep hair and other debris out of the pipes where possible. Here's my solution. I know there are a bajillion other similar solutions on…
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
A 3d printed Lego Mini Fig Chair that goes on top of 3d Printy's Emoji Printer Bobbleheads. Print with out support. You can use ironing on the chair and spring but not the base. You may have to clean up the edges of the studs for the…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
I designed this hair dryer concentrator to replace the original one. The exact model is Remington AC3300 but it should be compatible with any hair dryer with 42,8mm connection diameter
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for PETGSource material: PET
Orson Krennic, an Imperial officer and the director of Project Celestial Power (the secret project to build the Death Star), had taken a particular interest in Princess Leia after her capture during the Battle of Yavin. He saw potential…
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for one variant
This is a simple design I made for a contest on Printables. Print flat in PETG Edit 6/28/2024: Changed license to public domain due to AI generated content.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
![XMAS Hair Stick (7 types) [Christmas hair stick]](https://media.printables.com/media/prints/271aa3aa-9741-46a6-ba16-4e2c30bb2c9e/images/11496953_cd71e655-d771-448e-b3d6-3c75ec7fa0b2_382608d8-4d8f-43cc-840a-c4cb8be4b3fe/fffff.png)
