Guitel office chair castor
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.32 – €0.39 net (excluding VAT)
For file: castor axis_0.2mm_PETG_MK3S_26m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.36 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 26.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Guitel office chair castor is a spare wheel for any office chair with a universal stem 11MM 5SZ
- Rating
- 0 / 5
- Likes
- 40
- Downloads
- 244
- Makes
- 0
- Views
- 1,198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
The castor is from the Guitel brand specifically for office chairs with a universal stem,
The repair was necessary for two reasons, because some of the wheels on my chair stopped turning and the appearance no longer looked as if it were new.
The 3D printed version of this product consists of several parts and their layers are oriented so that they do not break during use. Glue is required for assembly. I am attaching the assembly instructions, which also indicate where the glue should be applied. The wheels are made in two versions: all black and a black wheel with a gray edge to resemble the damaged original wheel. I have also added a simple technical drawing of the stem and a stp file, specifically the part by which the stem is anchored in the wheel, so that they can convert the stem to their chair if this part does not fit their chair.
Print setting:
Material: PET-G
Nozzle: 0,4 mm
Layer height: 0,20 mm
Infill: 20 %
GUITEL wheels for the office chair - fi 11 mm
