Counting matching models…
There are Two parts to print ; 1. The back cover (I printed in several parts then glued) 2. The hose connection, here I choose to make the same design than the orgininal, but you could design what you prefere (I glued it too). The device…
I put NAIERDI Office Chair Castor from aliexpress ( https://www.aliexpress.com/item/32944808613.html ) to my IKEA Markus chair and was very happy with them. However, after a year some debris (cat fur mostly) build up in top open axial…
Tired of having to pick up the top panel of my Castorama Neva fence from the ground after every windstorm, I made this clip. Made to fit on Neva aluminium posts (7 cm square) from Castorama. Need supports to be printed, preferably with…
Allows a standard office chair castor to be attached to things like, say, a sheet of 1/2" (12mm) plywood. I'm actually using this to build a moveable, catproof barrier. Yes, the castor is at an angle in the photo. That's because the…
A simple cup to prevent castor wheel fitted furniture from running about. A secondary consideration was to minimise the amount of material used. Best option is to fit cups to all wheels (presumably 4) since they do introduce some…
A 3 piece print for a simple castor for a clothes drying rack. I sanded the wheels so that they slide a little better and used some superglue to keep them together.
Hey, everybody. I would like to share a model of a caster frame that I made for my cabinet here. I don't mean to offend anyone, but the current design of Stanley System castors has a fatal flaw. Being tired of having to constantly replace…
Ventilador de repuesto para el rotor electrico de la motosierra Castor 1800w. Recomendable imprimir en PETG o ABS. Pruebas con PLA dieron como resultado una pieza demasiado fragil.
it was made originally for a chisel honing guide so there are 2 screw holes. it fits 1/8in or 2mm screws. the axles might be a tight fit, so I recommend downsizing them just a little. also, when slicing put the base piece sideways. to…
New feet for Castorama RAND. This new one adds 20mm to the floor. A new double leg to combine two shelves.
Remove the lower sheet metal castor bar. there is one nut on the bracket. remove the pin from the castor part with a tool. print this part and put the old castor back into it. reassemble.
This Castor Support allows owners of the P.I.T. mini toolbox to add ½" castors to the bottom toolbox. The castors can be purchased off Amazon P/N JL-05SR https://amzn.to/4em5wGq Two supports required for the application. I used the double…
Castors for ball bearings. Inner diameter: 16mm Outer diameter: 21mm Width: 6mm
Just a simple light-switch replacement part for one that broke in my house. This corresponds to the french shop Castoramam ref 13DH61-C. Prints as-is without support. Careful about the little tab when inserting the switch, it's narrow…
--- This model includes a break to fix the caastor. You can find a model without break - here . --- This furniture rollers have smooth 360 rotation around the vertical axis and can be used for example for your Prusa Enclosure V2 - MMU2S…
Moebelrolle Furniture roller castor roll Category: Replacement Parts
This design was realised during Latin classes by Gwenola Cloâtre and her students, then exported from Minecraft with Mineways. I recommend printing the temple in 2 parts to avoid too many supports. Temple of Castor and Pollux - Wikipedia
I built this adapter plate to place an IKEA BESTÅ cabinet on castor wheels, since the cabinet does not provide very much “substance” on the bottom panel - in my optinion not enough for securely attaching wheel plates directly using wood…
See the roulette odds in the photos Replacement caster for the SABA CB315HNFEX freestanding refrigerator/freezer combination (upright) I recommend printing on PETG for greater durability.
A damping roll for a swivel castor (ca 80mm outer diameter) Printes wirth some modifyers, see modifyers in mf3.
Remix of original to add holes and depth to allow interfacing with a castor wheel assembly. Nothing fancy, just extended the bottom to give the screws some clearance to not hit the foot, recessed area for the nut to sit flush and tight.…
Dalle rive di un fiumiciattolo immaginario arriva Pluf , il castoro più morbido del mondo 3D! Con i suoi occhioni neri e i dentoni adorabili , Pluf è un piccolo compagno pronto a portare un sorriso su ogni scrivania, mensola o comodino.…
I needed a knob as spare part for my trailer (Koch). The hole on the bottom of V2 has a width of 16,3mm and a depth of 65mm, for the first version it is few mm less. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
There are Two parts to print ; 1. The back cover (I printed in several parts then glued) 2. The hose connection, here I choose to make the same design than the orgininal, but you could design what you prefere (I glued it too). The device…
Same as summery: Is thread to smooth bore adapter. ID of bore is 6.15mm. The in-wall to outer valleys of thread are as thin as possible.Is thread to smooth bore adapter. ID of bore is 6.15mm. The in-wall to outer valleys of thread are as…
Adapter for connecting IKEA Alex castors to the Ikea Platsa. The Design uses the screws from Alex and Platsa for mounting and only one additional screw for preventing the rotation of the adapter. It is designed that the adapter supports…
Moebelrolle Furniture roller castor roll Category: Replacement Parts
I put NAIERDI Office Chair Castor from aliexpress ( https://www.aliexpress.com/item/32944808613.html ) to my IKEA Markus chair and was very happy with them. However, after a year some debris (cat fur mostly) build up in top open axial…
Tired of having to pick up the top panel of my Castorama Neva fence from the ground after every windstorm, I made this clip. Made to fit on Neva aluminium posts (7 cm square) from Castorama. Need supports to be printed, preferably with…
Using some cyano glue, some M5 nuts and bolts and these casters you can give your HOL coffee table storage wheels. Can be printed in PLA or PETG. Model contains 4 feet, because, why would you want less than 4 casters on your coffee table?…
The Giant Beaver Castoroides , which could grow to the size of a black bear, went extinct about 10,000 years ago, near the end of the last ice age. It's believed to have dined on aquatic plants and held a place in the ecosystem similar to…
Just a simple remix of Chuck B's original design. I increased the size to suit 30mm box section and changed the hole diameter to accept the M8 thread of the castors I had on hand. I also made a double sided plug, so I could stack two of…
I needed a castor wheel for a Stiga Ping Pong table, I couldn't find one so I created one. The wheel itself is 41mm in diameter. The size of the hole where the pinion goes in to the casing is 8mm in diameter. I printed it in eASA as the…
50mm castor wheel of the type used on the bottom of cabinets. Print instructions Unassociated tags: 50mm castor, castor wheel, swivel castor Category: DIY
Moebelrolle Furniture roller Bitte beachtet auch meine Designs auf https://www.thingiverse.com/rolfmobil/designs und https://cults3d.com/en/users/rolfmobil/creations unter gleichem Benutzernamen (rolfmobil)... Furniture roller Furniture…
Moebelrolle Furniture roller Bitte beachtet auch meine Designs auf https://www.thingiverse.com/rolfmobil/designs und https://cults3d.com/en/users/rolfmobil/creations unter gleichem Benutzernamen (rolfmobil)... Furniture roller Furniture…
A clip-on castor wheel mount for the Ikea Algot frame. Fits standard castor stems (7/16"), and snaps on to the horizontal bars at the bottom of the frame. Attach with the longer arm on the bottom so that the weight of the shelves tends to…
Created for portable air conditioner. Printed in TPU, set infill to about 15% gyroid but can set for your preference.
This is a simple modification to get your IKEA Lack table on casters while keeping the overall aesthetics. The key to this design is finding the proper hardware. The wheels must be small enough to swivel around within a 22.5 mm radius. I…
The model fits to castors with a 60x60 mm plate. The bolt hole spacing is 38x38 mm and the bolt hole diameter is 6.2 mm. There are two versions. One that just covers the plate of the castors and one with an added extension, that can hold…
I drew the model in Fusion360. Here is a link to the castors this model is for: https://www.amazon.de/Strandkorbrollen-M%C3%B6belrollen-Lenkrolle-geeignet-Laufspuren/dp/B07K43BVPN My print properties: 100% infill Material: PETG No supports
This is a part between the floor and a castor wheel, fitting the castor wheel shape, to protect the floor and prevent the castor wheel to roll. The 1950s Singer sewing machines had small steel castor wheels. If rusted, they trace dirt…
I really 💕 the 3D printable Grand Piano model designed by @Mechanistic - available on this platform . He did an amazing job creating a working model of a real Grand Piano. However, as an owner of a real Grand Piano, I instantly noticed…
EN version: The original Scan was made by the Mammal Research Institute, Polish Academy of Science during the Open Forest Data project . You can download the original data here . :) I fixed the model to make it printable. The skull is not…
Heres a bracket designed for 30kg rated light duty swivel castors. Bracket is designed to fit to internal corners. If you intend to have the wheels flush or low to the inner skirt you're fitting to, i would recommend a 5mm spacer on both…
Holder for bateries works with MacAllister SOLO 18V Batteries. Tested with 2.0Ah but 1.5Ah and 4Ah will work too __________________________________________________________________________________ Some options available - chose best fit…
For assembly you will need: 1 608 bearing (8mm x 22mm x 7mm) 2 MR105-2RS bearings (5mm x 10mm x 4mm) 1 M8 x 20MM screw and lock nut 1 M5 x 35mm screw with 2 washers and a lock nut 4 M5 mounting screws (length depending on thickness of…
I think there are too few models that deal with nuclear energy. That's why I remodeled the Castor V52. Short background story: This castor is used in Germany to temporarily store 52 spent fuel elements from the nuclear power plants until…
Scarfring or neckerchief based in a Cute Beaver. Pasa pañuelo de adorable castor para scouts, lobatos y castorcitos
The castor is from the Guitel brand specifically for office chairs with a universal stem, The repair was necessary for two reasons, because some of the wheels on my chair stopped turning and the appearance no longer looked as if it were…
Lost one of the front castors from an old American tourister hard-shell suitcase and couldn't find that style anywhere online, pretty much impossible to request from the manufacturer as it isn't on their website and they actually have a…
I made these simple castor cups as my old underlay and carpet was ruined from the castor wheel movements on my SecretLab Omega chair. I have the older 2020 Omega chair - no idea if the latest models (or Titan and different models) have…
Allows a standard office chair castor to be attached to things like, say, a sheet of 1/2" (12mm) plywood. I'm actually using this to build a moveable, catproof barrier. Yes, the castor is at an angle in the photo. That's because the…
Well, there's not much to say about it, just see if you can use it.
I needed a replacement wheel. Original was rusted on. Sawzaw couldn't work. Only a cut-off wheel would work so be careful. Compost Barrel Tumbler Seems like about 10-15 Pounds per square inch. I'm sure you can exceed 20+ but then you'll…
Basic information This is a simple wheel / roller / castor replacement for the "Rotho Clear Box" from "Bauhaus" ( https://www.bauhaus.info/kunststoffboxen/rotho-clear-box/p/30111291 - Product Number: 30111291). As the original castors of…
Neue Version verfügbar (New version available): https://www.printables.com/de/model/835321-lenkrolle-swivel-castor-version-2 Lenkrolle, die man zum Beispiel unter die Beine eines Lack-Tisches schrauben kann. Die Rollen haben einen…
Model and G code for these handy castor cups for the TC100 gaming chair or any other chair with 66mm dia x 55mm wide castors. Great for stopping your gaming chair sliding around on laminate floor. You can also add some non slip mat…
A simple cup to prevent castor wheel fitted furniture from running about. A secondary consideration was to minimise the amount of material used. Best option is to fit cups to all wheels (presumably 4) since they do introduce some…
Français : Roulette arrière pour aspirateur robot Neato. Imprimer en TPU pour réduire le bruit ou en Nylon pour réduire le bruit et augmenté la résistance, sinon du PLA, PETG ou ABS font très bien l'affaire (Eviter les filament enrichie…
I've lost somewhere supports that i got with Castorama's Atomia shelves. So I've printed replacements. Print done in PETG.
Lenkrolle, die man zum Beispiel unter die Beine eines Lack-Tisches schrauben kann. Die Rollen haben einen Durchmesser von 55mm. Die Aufnahme ist 50mm*50mm groß. Zusammengebaut hat die Rolle eine Höhe von 75mm. Die Rollen können komplett…
A mount for an Adafruit caster bearing wheel for use with 8020 series 10 extrusions. ( https://www.adafruit.com/product/3949 ) Three different hights are provided to match with wheels by Adafruit and Actobotics. (It's what I had laying…
This is the part of the IKEA OMAR shelving foot that slides over the pole. It is useful for attaching threaded castors. Two versions are available. One with an M8 1.0 thread (same as the original part) and another with an M10 1.5 thread…
A 3 piece print for a simple castor for a clothes drying rack. I sanded the wheels so that they slide a little better and used some superglue to keep them together.
Print the main part with PETG (min 4 layers with a .4 nozzle) Print the wheel with TPU
Replacement castor wheel designed for a drying rack, but works for anything else. Fits a 4mm pin mount, and has 35mm dia wheels. Vertical functional distance (top of mount to bottom of wheel) is 40mm. Print is in a single piece with no…
--- This model is without a break to fix the caastor. You can find a model with break - here . --- This furniture rollers have smooth 360 rotation around the vertical axis and can be used for example for your Prusa Enclosure V2 - MMU2S to…
This is a really simple print, but it's one of the most useful I've done. When I got antique furniture from my mother a few years ago my wife was worried it would score our wooden floor with the metal castors it had. I just drew up two…
Hardware: 608 bearing Round Tubing Mount for JeyMCO's Swivel Wheel @ https://www.printables.com/model/756974-swivel-wheel-5cm
Hardware: 608 bearing Round Tubing Mount for JeyMCO's Swivel Wheel @ https://www.printables.com/model/756974-swivel-wheel-5cm
Most drying racks have a tubular frame with bent tubes. The castors are attached as far out as possible at the bends, i.e. at the “corners” of the legs. This provides better stability. On the drying rack itself, only the feet clipped onto…
