1 / 3
Swivel-less Castor Wheel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was looking for a castor wheel but couldn't find any that didn't swivel so I made my own :)
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 50
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
it was made originally for a chisel honing guide so there are 2 screw holes. it fits 1/8in or 2mm screws.
the axles might be a tight fit, so I recommend downsizing them just a little.
also, when slicing put the base piece sideways.
to assemble:
- take the base piece and screw it into your material of choice
- insert wheel into slot
- from outside of base, push axle into the holes and through the wheel, until coming out the other side
dimensions:
- base: 2cm x 2cm x 2cm
- wheel: 2cm diameter
printed in Polymaker PLA Stone Blue filament