Stacking chair game - easy to print
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.08 – €0.09 net (excluding VAT)
For file: Test_1_0.4n_0.2mm_PETG_COREONE_5m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.08 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 5.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The chairs for this game are printed without supports or bridges. The chair snaps together from two parts.
- Rating
- 5 / 5
- Likes
- 785
- Downloads
- 1,360
- Makes
- 13
- Views
- 8,633
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a version of this game that prints easily without supports or bridges. Assembling is fun and feels great. The honeycomb structure allows for many different configurations with just one chair design.
I printed the chairs from PETG, but PLA works well too. The chairs were printed using the standard 0.2 mm balanced profile.
I've uploaded another test for the connector. For example, I have to set the flow rate on my Core One with Prusament PETG to 0.98 to avoid over-extrusion. Another filament, on the other hand, works well at the standard flow rate. So try something, know your values, or have a Baumbu printer ;)