Stacking chair game - easy to print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The chairs for this game are printed without supports or bridges. The chair snaps together from two parts.
- Ocena
- 5 / 5
- Polubienia
- 784
- Pobrania
- 1358
- Wydruki
- 13
- Wyświetlenia
- 8625
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a version of this game that prints easily without supports or bridges. Assembling is fun and feels great. The honeycomb structure allows for many different configurations with just one chair design.
I printed the chairs from PETG, but PLA works well too. The chairs were printed using the standard 0.2 mm balanced profile.
I've uploaded another test for the connector. For example, I have to set the flow rate on my Core One with Prusament PETG to 0.98 to avoid over-extrusion. Another filament, on the other hand, works well at the standard flow rate. So try something, know your values, or have a Baumbu printer ;)