Shampoo/hair care/cosmetics bottle cap (24/410)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.38 – €0.47 net (excluding VAT)
For file: dop_0.2mm_PLA_MINI_26m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.42 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 26.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fits a lot of of cosmetics bottles. Provides gap for seal and allows for a debossed label.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 367
- Makes
- 1
- Views
- 1,378
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Public Domain
Printing
I use 4 parameters to make the threads solid. Seams I chose to place randomly, to not make it weaker in one spot and to keep negative aesthetic impact low. I used snug supports to keep the cavity for the seal clean; it's easy to remove with an exact knife and a small screwdriver. You can omit it if you're not using the seal (or use it from the example gcode, and don't remove).
Customize
If you want a label on top, you can deboss down 1mm on the cap.
Background
I had this bottle that I wanted to repurpose as an IPA storage bottle (being more compact that a 1L bottle for day-to-day usage). I found out it had a 24/410 thread (or “neck finish” as it's apparently called) and found this hackaday post detailing how to make a custom cap: https://hackaday.com/2020/07/12/learn-the-secrets-of-matching-bottle-cap-threads-to-one-another/.
I used the tool mentioned in the post along with this video to create my own cap, which worked first try: https://www.noupoi.net/bottle-cap-thread-calculator.html
