Shower Drain Hair Catcher (⌀70mm) suitable for Viega Tempoplex
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.56 – €0.68 net (excluding VAT)
For file: 70mm-showerdrainhaircatcher_0.4n_0.2mm_PETG_MINI_41m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.62 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 40.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Shower Drain Hair Catcher suitable for Viega Tempoplex - Duschablauf-Haarsieb passend für Viega Tempoplex
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 262
- Makes
- 1
- Views
- 916
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The original hair catcher hangs deep in the drain in the water, which I found very unpleasant, so I designed this hair catcher so that the sieve and the hair can dry and it is perceived as more hygienic.
The part was created with FreeCAD. PrusaSlicer was used to add modifiers and so the Honeycomb infill is used as a sieve structure.
It has a diameter of 70mm and a height of 15mm.
If you need other dimensions I can adjust it and upload it additionally.
Printed with Das Filament PETG Alu-Silber on my Mini+.
-
Der originale Haarfänger hängt tief im Abfluss im Wasser, was ich als sehr unangenehm empfand, daher habe ich diesen Haarfänger entworfen, so kann das Sieb und die Haare trocknen und es wird als hygienischer empfunden.
Das Teil wurde mit FreeCAD erstellt. Mit PrusaSlicer wurden Modifikatoren hinzugefügt und so wird das Bienenwabe Füllmuster als Siebstruktur verwendet.
Es hat einen Durchmesser von 70 mm und eine Höhe von 15 mm.
Wenn Sie andere Abmessungen benötigen, kann ich es anpassen und zusätzlich hochladen.
Gedruckt mit Das Filament PETG Alu-Silber auf meinem Mini+.