1 / 4
Shower Drain Hair Catcher (⌀70mm) suitable for Viega Tempoplex — zdjęcie 1
1 / 4

Shower Drain Hair Catcher (⌀70mm) suitable for Viega Tempoplex

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,56 € – 0,68 € netto (bez VAT)

Dla pliku: 70mm-showerdrainhaircatcher_0.4n_0.2mm_PETG_MINI_41m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,62 € netto (środek widełek).

Masa podana przez autora
7 g
Czas druku podany przez autora
40,8 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Shower Drain Hair Catcher suitable for Viega Tempoplex - Duschablauf-Haarsieb passend für Viega Tempoplex

Ocena
5 / 5
Polubienia
25
Pobrania
262
Wydruki
1
Wyświetlenia
916
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

The original hair catcher hangs deep in the drain in the water, which I found very unpleasant, so I designed this hair catcher so that the sieve and the hair can dry and it is perceived as more hygienic.

The part was created with FreeCAD. PrusaSlicer was used to add modifiers and so the Honeycomb infill is used as a sieve structure.

It has a diameter of 70mm and a height of 15mm.

If you need other dimensions I can adjust it and upload it additionally.

Printed with Das Filament PETG Alu-Silber on my Mini+.

-

Der originale Haarfänger hängt tief im Abfluss im Wasser, was ich als sehr unangenehm empfand, daher habe ich diesen Haarfänger entworfen, so kann das Sieb und die Haare trocknen und es wird als hygienischer empfunden.

Das Teil wurde mit FreeCAD erstellt. Mit PrusaSlicer wurden Modifikatoren hinzugefügt und so wird das Bienenwabe Füllmuster als Siebstruktur verwendet.

Es hat einen Durchmesser von 70 mm und eine Höhe von 15 mm.

Wenn Sie andere Abmessungen benötigen, kann ich es anpassen und zusätzlich hochladen.

Gedruckt mit Das Filament PETG Alu-Silber auf meinem Mini+.

Tagi