Counting matching models…
About I used hole in the doors of the Original Prusa MINI Enclosure as an entry point for filament PTFE tube. Moved handle for fingers a bit lower, and added magnetic coupler in there for s 6x2mm magnets, which are popular in gridfinity…
This handle has more space then the original with a rounded section for the fingers.
A drilling guide for door handles. It's slightly parametric. Here is the link to the Onshape project:…
The SHTI (Simple Handled Thermal Imager) found on Amazon HERE (not affiliated, I don't make money from this link) comes as a bare circuit board. I made a basic housing to protect it. It includes an optional lens guard that can be glued…
I made this because my son temporarily lost the handle to my keyboard brush that I use for lots of things (great for cleaning electric shaver). Printed with a brim, no supports, uses around 15g.
Handles for Skånska Byggvaror Outdoor parts Intended to sit on the inside of lot with fitted outside original handle. With the handle, you get a grip to push the part from the inside. The handle does not prevent the parts from being…
Give some extra color to your bike with these dual color handlebar plugs. These plugs have total diameter of 32mm so they match better with lock on or really thick grips. Thanks to Single - Extruder Dual - Color technique, you don't need…
This is designed to have an 8mm x 4mm round magnet inserted in the center. This handle should feel like the new Citadel painting handle for small models, however I designed it to work with bigger hands. This handle will work great with…
I previously remixed another users door handle to mount in the bottom panel to lift and access the electronics bay. It was kind of chunky and the insert didn’t fit well so I finally got around to making a new one. I put the logos that…
WIP - the handle is maybe 0.2mm too long over it's entire length, and there's not enough margin on the “boltway” parts: I cracked my handle slightly while putting them in. But it fit on line, so I probably will not fix this model, unless…
Ever wanted to use your uConsole while lazing around? I did. I bought the uConsole to develop small games and demos while lazing in bed after the kids were asleep. I promptly started dropping it on my face alot. This is version 3,…
*2024/10/14 Added a skeleton version for better sight.
This is a clip for rockshox shock pump handle. TO install it, you only need a ziptie to hold it in place.
Wanted a stand for the hex set from teng. The set has 2.5mm to 8 mm – but I also have separate 2, 10 and 12mm wrenches. The first version has a slightly loose tolerence on the joints between parts - so I uploaded a second copy with a…
You need: 4 x screw or velcro tape. Good luck ;-)
I liked the look of the StarSaber and didn't want to buy one, So here we go.
I created a model of this handle to replace a broken handle in my toolbox. You need 2x ϕ3mm pins to assembly it.
Handle for The T1/Pro The uploaded orientation is intended to have a clean, visible surface, but of course, it can also be printed differently without supports. Unfortunately, my printer didn’t come with a handle, so I quickly created my…
Made this for my mother and her Bible study friends for Christmas. You can download the stand here. https://www.printables.com/model/1063406-sign-stand Updates January 27/25 - Updated files and Printer Settings Printer Settings…
The countersinked hole is for the wood screw The other one is for attaching handle to cabinet door. 15 mm dowel fits in this one! (if its 14 mm no big fuzz) 20 % infill No support Print standing position Pre drill hole into wood dowel…
Voici 2 versions de poignées pour s'adapter aux 2 tailles de tiroir permettant un retrait sans se bruler des 2 moules en silicone. Impression en ASA conseillée Here are 2 versions of handles to adapt to the 2 drawer sizes allowing removal…
I am looking for a practical and innovative solution for my Wolfcraft drill chuck ease to use with hand in vaious DIY projects. This unique 3D model handle is specifically designed to be easy and confortable. U can use any material and…
This is a robust handle for the QBone board. It helps getting the board in and out of the backplane. These are usually found on Dual-size PCB boards, but here applied to a Quad-size PCB. Boards like these are found in DEC PDP-8 or PDP-8…
A handle and latch replacement for Frigidaire's mini fridge, model FFPE4533UM. Modeled after the stock handle and latch plate. Includes a high and low latch panel if the fit isn't correct. Does NOT include the tooth column that sets…
I broke the handle on my MK Krøger H40 caulking gun (excellent tool, highly recommended!). This is a direct replacement , as I couldn't find a spare part available. Printing Orientation flat, with supports for the holes. 0.6mm nozzle and…
A simple replacement for a broken broom handle cap for sticks with a diameter of 21.5 mm. It is printed with Fiberlogy Fiberflex 40D, which is a bit tricky. No support was used, but an outerbrim of 3 mm to make sure that the object is…
Volvo XC90 Folding Folding Seat Latch Release Handle (Rear, Interior code: RXXX, RXXX). Volvo original PNs: 39826799 ; 39826801 Two files, with and without Volvo logo available. If printed in high strength material (PETG, PCTG, PCCF etc),…
Mount for garmin edge devices that clamps on to 35mm handlebars and sits in the middle over the stem. Very durable and won't rotate or break even on the roughest downhill tracks. The top clamp (blue in the photo) is designed to break in a…
I needed to replace a broken handle on an old wooden window. I figure that it's faster to just design it and print it out than try to find a replacement. It worked out!
Maniglia per lo smontaggio dei perni di accoppiamento per estrusori Prusa XL PETG
Kyocera Knife Replacement Handle - for small Ceramic Knife (all Purpose) of GEN series and probably NATURAL series as well, mine was the 13cm Blade.
Hi This is a Bicycle handlebar end caps. Printed in Flex (Flexfill 98A Filament)
I brought a second hand dishwasher and the handle was missing from the cutlery wash basket, so I created a new one in fusion. I had to split it in half as my build plate wasn't big enough but included the whole one in case yours is. My…
EN You can size it to suit your needs The hole can be enlarged or reshaped directly in your slicer using a negative volume. It can be hot-swaged or glued, depending on preference. No support 6 Perimeter anywhere Voilà FR Vous pouvez le…
Fridge handle broke, oh no! Not really sure which refrigerators these would be compatible with but if your handle looks like this one maybe it will fit your needs, it seems from some cursory online research most Frigidaire refrigerators…
This is a quick practical print solution to a problem I was having. My partner loves these flexible laundry baskets, but we find that after some use, the handles often split, making them difficult to carry around. We didn't want to buy…
NEW FOR QUEST 3S! Quest 3 version here: https://www.printables.com/model/933285-oculus-meta-quest-3-stand-with-carrying-handle-for This is an Oculus Quest stand to be used when your Quest is not in use, and meant to facilitate easy…
I needed a better way to hold hem when using my allen hex keys. Stumbeled on these , all credits go to Uncle Frank says for designing the handles. Had a Skadis board but no holder for the printed handles. So I “designed” one. I only have…
Replacement for broken Beko Freezer handle (must be connected and glued together) Náhrada za zlomené držadlo mrazáku Beko (nutno spojit a slepit)
Sparklers are a great way for children to take part in the fireworks on New Year's Eve. Although they are not dangerous, many children have respect for sparklers and find it very difficult to hold the thin wire. With this quick and…
Woodford Model 17 Sillcock handle. Included the .blend file. Category: Replacement Parts
I've tested the model and 2 adapters with the following brands and types Adapter V1: Nivea stick, Dove men's stick, Rexona men's stick, Arm and Hammer stick deodorant Adapter V2: Mitchum Gel deodorant (all 96g versions), Speed stick (76g…
Futuristic Design Handles - Maniglie design futuristico Overall dimensions: 105x240x45mm Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks
Furniture Handle with a hole distance of 32mm. I printed it with PETG-CF.
A holder for deburring tool blades. The handle I had allowed the blade to rotate, which is great for deburring tools but inconvenient for deburring edges of parts, which is primarily what I use these tools for. This handle is designed…
Print the handle in PLA and the stamps using any flexible material, like TPU. Each can be printed without support with the connector pattern facing down.
Handle for screws. 100x20mm Has a hole for a 5x3.5mm magnet If you wish, you can add fuzzy skin to the outer perimeter
This model is compatible with the lego system.
This is designed to use ¼" shank bits by epoxy gluing them into the handle. You can print a bunch of them and glue in different types and sizes of bits to each one, or do what I did and print just one and glue in a magnetic bit holder.…
Ручка ящика комода. Расстояние между центрами отверстий 125 мм, диаметр отверстий 3,5 мм. Крепление саморезами. @Печать с опорами
You will find here a handle model for bedroom, office, or other drawer units. A small inscription 'PRUSA RESEARCH' is engraved on it.
Hello there, I made this handle for my daughter since the original IKEA handle broke. She painted hers with melted cryons but whatever method is fine. Its easy to print and it works fine so far. The hole distance is 128mm.
Like those little annoying screw things you are supposed to use the handle on to release the jack and stuff. . . This is just a industrial-looking handle that snaps onto the thing and makes life better (more or less) This is the knob…
Just add M3 plastic insert-nut and paint it! Enjoy your snake knob handle! For any furniture. Slytherin in your room. Category: Decor
Just add M3 plastic insert-nut and paint it! Enjoy your koala knob handle! For any furniture. Cuteness in your room. Category: Decor
It is a handle for those refrigerators in which it can be changed, in this case the size is adjusted for a samsung refrigerator, but in the files is the .obj file if anyone needs to modify it and adjust it to your liking. Print Settings…
Protect your SDS MK4 Swerve motors and electronics from damage caused by tipping the robot on its side or external impacts (like a swinging steel cage). These also function as handles to lift the robot. After printing, the three holes on…
The scale is the same as the original model (100%). Feel free to resize it to fit the scale of your model;)
you can gleu some nuts in it for the screws so its a bit steadier
Handles for Hex Keys. This includes all sizes from a kit available from Home Depot.
Print all parts with a brim. I suggest printing inside pieces near each other so that brims attach together and help keep it from being knocked over. Print at 0.2mm. You will need two of the grommets. Or maybe more. See video to determine…
Store eight minis during painting based on my magnetic tops for the Redgrass painting handle . There is also a rack to combine 3 of the bases for easy transport. Glue 5x2 mm magnets at the top of every stem to harness the power of magnets…
Printable rack rails and matching 6mm nuts and bolts to mount your (lightweight) equipment in 10" DIY racks There are lots of options for printable rails out there, but I wanted something where I could mount side panels and have…
Fills the gap used as a handle on the door of the IKEA Alex cabinet. I've included STL's for versions with and without a handle, as well as the basic shape without the back plate if you want to do something else with it. I designed this…
Handle for hex shank screw or socket driver. There are 4 different files sized slightly differently for different fit tolerances. The permanent fit is pretty tight, the drivers are meant to be tapped in with a mallet and are not meant to…
Org. handle broke after decades of usage. So I replaced with a new design. Designed in TinkerCad. Printed on my BambuLab A1 with AMS lite: Handle: Tinmorry PETG-CF in olive, Supports same, support interfaces in Bambu PLA-PETG support…
A hammer bead with a open handle to feel your drawstring while you go to work. 6mm hole. Thanks for the support.
G E R M A N Türgriffverlängerung für die Elia-Scheiben. Meine Frau ärgerte sich immer wieder, wenn sie mit der dicken Winterjacke die Türen öffnen wollte. Die Scheibe drückte ihr in die Achsel. Das sei unangenehm. Also entwarf ich auf die…
I've included the STEP file in case you want to modify it for your microwave. I printed in PLA with relatively high infill (50% or so). I expect it won't last as long as the original, but it'll be a lot less than $150 when I need a new…
Fridge Handle Repair beko Uchwyt mojej lodówki Beko się zepsuł, który jest dostępny w urządzeniu. Wydrukowałem modele grafiki @z SUNLU PLA+ 2.0 w kolorze białym. Uchwyt solidny i bardzo zbliżony do oryginału. @Rozstaw kanałów wynosi 192,6…
This Hacksaw Blade Handle is one of several versions of my popular Hacksaw Blade Handle. It securely holds a standard 10" hacksaw blade and transforms it into a compact, durable cutting tool ! It provides a rigid and ergonomic extension…
I promised to cad this up ages ago and as soon as I actually started rebuilding my enderwire I actually did it. Inspired by RockAndRoll for the 2.4, you can tip an open or enclosed Enderwire on its side and and it will be stable. Yes my…
Mod to turn the side skirts into small handles. To make them a bit stronger I added one more screw fixation. I have two versions, with the original hex pattern and a solid version. I use the solid version on the fanside to prevent the…
The handle for the balcony door is mounted on the outside of the balcony door. It can also be used on terrace door, door screens and similar applications. The holes spacing is 43 mm and 48 mm. The hole diameter is 4.6 mm. Add a small drop…
These are angled external handles that fit all BeamCase variants that use the simple chamfered case panels (the default ones). These handles are very sturdy, and also act as bumpers for the case to protect it. There are two versions of…
I designed this because I wanted a screwdriver handle grip for a set of nylon bore brushes I use for removing internal strings from 3d prints. Sometimes it's difficult to find the right bottle brush but the nylon bore brushes come in…
I got a nice brass bell with my bike - it mounts as one of the headset spacers. Only trouble is that this means I need to take my hands off the handlebars to ring the bell. Oh, and it's kinda awkward to find the tinger thing. On other…
Prints standing with a brim and a bunch of support. The triangle for support snaps off after printing.
The lady wants her coffee, we give her her coffee. Specifically sized and contoured to fit the (now discontinued??) 32oz. BrüMate Nav XL tumbler. They appear to now be selling it in redesigned 35oz. cups; I have not tested with those.…
This is a compact and ergonomic T-handle driver designed for a fixed or non-standard bit. The bit is securely inserted a
A handle for the set of stamps with simplified logos of all the teams in the English Premier League. The stamps for this handle are HERE (Face Up print) and HERE (Face Down print) The handle can be printed in any stiff material you like…
Fits 03-11 front driver and passenger side. V1 has straight edge, V2 has a small bevel at the edge. Honda part number 72121-SZ3-013ZA. Best print with PETG or ABS, use support.
I bought a stylus to enter directions on my phone while biking with gloves on. This is mostly useful in the winter. I didn’t like the original double-sided tape mount, so I designed a simple 3D-printed handlebar mount instead. It snaps…
I modeled this handle to carry this scooter more easily by one hand, if mounted as in photo, its quite balanced. If you want, you can print one piece of “Handle clamp hole” so you can carry your allen key here as in photo. I've been using…
Silver Dollar City has a cup, once you buy it, you can use it all year, free refills. It's an insulated tumbler with no handle. Wife wanted a handle. I did one with a handle, and one with a pair of loops so you can attach a cord, hang it…
I made these handle bars so I can push my kids on the scooter, I have been using these for couple months and they work great, without any failure. You can easily remove the handlebars with allen key when not in use. I DO NOT recommend to…
Airpump handle broke years ago so I designed this one. The original screws just barely push by but it works for me. 0.25 layer height, 4 perimeters, printed in petg.
this is a lightsaber handle for a common glowstick a little something to make your glowsticks way more fun
Top door handle for older Amana fridge. Approximately a 1990-2000 model
Forward grip for Picatinny rails. I hope it fits the profile, otherwise, the Fusion 360 files are included ore contact me
Simple remix of the Collapsing Katana by Caleb Cole to make it into the perfect lake/pool toy! I designed this for my nephews to have epic sword fights and play king of the raft when we are swimming at the lake. 02/25/2026 - I added a V2…
A simple handle I've made for my pet hair removal sticky bands. The interior diameter of the handle is 36mm and the cap diameter is 42mm. If you like this item please leave a like! Thank you!
