Handle for Original Airpot Superroot Grow Tent
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.18 – €7.55 net (excluding VAT)
For file: plates_handle_M_0.4n_0.25mm_PETG_MK4S_4h59m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.87 excluding VAT (range midpoint).
- Weight reported by the author
- 134 g
- Print time reported by the author
- 4.99 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a solid handle for 20 & 38L Original Airpot
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 57
- Makes
- 0
- Views
- 529
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Standard Digital File License
print parts with 3 perimeter, 30%grid & 0,25 layer height or use 3mf
what u need (two handles):
printed parts: 2xHANDLE (MorL)/4xHANDLE_MOUNT/16xSCREW_v2
4x screw M4x12mm or longer
16x screw M3x12 or longer, max: 20mm
4x M4x6mm heat insert
u can find the SCREW_v2 >> HERE <<
how to assemble:
-attach M3 screws to SCREW_v2
- melt in nuts (from the back side), one per plate. attach handle
- find a good position on your airpot to place the handle, after placing it remove the handle
- attach 3 SCREW_v2 (with inserted M3 screw ! ) to the 3 bottom holes on each side. use a coin or NUT_13 from >>here<<
- ensure the melt nuts are on the bottom holes of HANDLE_MOUNT
- attach handle , lock it with a M4 screw and one SCREW_v2 for each side in the top hole
You are ready to go!
I hope you will enjoy it & stay green !