Counting matching models…
Some growing lights are designed to grip on the side of the plant pot, but for smaller plants this is sometimes not an option, because they are too light. This is where this model comes in. It has a block to grip to and a large base to…
Where stories take root and imagination grows, this Tree Growing from Open Book sculpture captures the magic of knowledge brought to life. A detailed, twisting tree trunk rises organically from the pages of an open book, its roots…
Tray for Pre‑Growing Seedlings in Compressed Substrate Blocks This tray is designed for efficient pre‑growing of plants using compressed substrate blocks measuring 5 × 5 × 5 cm. The overall dimensions of the tray are 22 × 23 cm. Its…
Print Settings / Nastavení tisku: Layer height: Variable (Adaptive) Infill: 5% Gyroid or Lightning Nozzle: 0.4 mm Material: PLA (Matte preferred for best results) Supports: Support-free (No supports required) Brim: yes EN: Easter Bunny…
System designed to care for plants in their growth, also to mount vines, you can support even more things, not just plants. How Start: You can start printing the starter kit to build a basic growing plant shield like you see in the next…
This growing pots are designed for cocos soil tabs. Print with support.
Growing Pot - Quick Release - Vase Mode Minimal material, maximum growth: easy-to-print growing pots in various sizes. To remove the plant, simply press the bottom slightly. My girlfriend uses these growing pots, from tiny seeds to…
Update: 03.02.2017 Bonjour, Ceci est mon premier gros projet qui allie Mecanique, Electronique et de l'eau XD Donc, le IPOTS est un pot automatique qui arrosera et régulera sa lumière avec une grow LED 10W votre plante en fonction des…
Support system for plants from the stem of the lamp. Stem of lamp was arround 15.4mm so can fit many diffrent models Used infill 15%
2 Store Greenhouse , I made for a Pair of Growing lights. Drawing Includes the Rod Lenghts for a base version. Technicaly Stackable when you need a third floor just print additional 4x Connector nr.2 and 2x Stiffeners. By Remixing the…
120-degree plant support, specifically for SCROG cultivation systems. Tutor para plantas de 120°, para cultivos SCROG .
Fill up the mason jar. Screw the Mason_Jar_Adapter onto the mason jar. Turn the jar upside down and slide into the Mason_Jar_Adapter_Stand. Water Level will be maintained. Print Parameters: 100% infill 0.2 mm layer thickness Material is…
I originally come up with this model for the printable awards trophy competition. This is the same model as my trophy entry, however I have removed the logo from this one. So it it now just a plain sculpture. The butterfly part and the…
Mount for growing 3 Avocados in a Vase. Adjust size for your Vase (not too much or the avocado might fall through.
A simple hydroponic basket for growing trays. Dimensions: 40x40x45 mm It is quite easy to use: Put nutrient liquid in the tray instead of soil and place the prepared baskets in the tray, the liquid should just reach the fibers during the…
All models are designed to print without supports. You can print on smaller printers like the Prusa Mini. Everything is made to fit on an 18x18 print plate. For the tray, you can choose between a low or high version. The lower one is for…
i created a little 7cm high plant pot with a diameter from 6cm
Probably the quickest growing pot to print - Simply print, fold and get started! - Dimensions 30x30x30 - No support structure necessary. - Printed in 5 minutes. - Material requirement only 2.3 gr. -Simply scale up for larger sizes Please…
All files are in *.3mf format because there are several modifications. I recommend planting the greens in the base on cotton pads soaked in water and sprinkled with seeds. Supports are recommended for the lamb figure. Color printing…
LG tiun mini, expanding growing space grow sponges with cone shape I just found this on AliExpress: US $5.30 | 50Pcs Seed Grow Sponges Replacement Root Growth Sponges Seedling Starter Plugs Seed Starting Seed Pod Hydroponic Garden…
This is a compact, modular, hydroponic growing system ideal for small urban living spaces. It consists of a series of interlocking hexagonal 'Urban-Cells' which mount onto a vertical backboard, allowing the user to grow herbs, leafy…
This 3D-printed round tray is perfect for easy and efficient growing of microgreens at home. The set consists of four parts: Bottom tray – serves as a water reservoir Inner tray – supports the mesh and maintains the right water level Mesh…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
I printed this at 200% scale, with 5% infill. Threads must be printed with support if printed at original scale.
Hello, I have a protective basket for growing strawberries for you. It is suitable for those gardeners who do not want to constantly have strawberries from the soil, the basket holds the strawberries nicely and does not get dirty. Another…
Plant Root Growing Box The Plant Root Growing Box is a special tool for easy plant propagation using the air layering method. This box enables quick and efficient rooting of branches directly on the parent plant without the need to cut…
Simple model of a microgreens planter with various extension like a stackable holder, lid, and sprouting tray. Everything was thoroughly print-optimized. The lid can optionally be separated in slicer and has a hole - for example, use the…
Growing melons in pots on a patio or balcony can lead to the fruit resting directly on hard tiles or compact soil, which risks bruising, rot, or uneven ripening. This 3D-printed pad is designed to gently cradle your watermelon (or other…
Microgreens are fun and easy to grow and add a nice touch as a garnish to all kinds of dishes. This three-piece kit includes a reservoir tray that holds water, a growing tray with holes for drainage, and a germination lid to help seeds…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This hydroponics tower growing clip snaps easily onto most tower tubes, giving your plants a stable support point as they grow. It prints without supports, installs in seconds, and helps preventing bending or breakage. Perfect for leafy…
Welcome! After months of designing and testing, Stage one is complete, and our Smart Sprouts Indoor Growing System is ready! This is a fully 3d printed indoor solution for growing sprouts and greens. This design is hydroponic and does not…
I created one pot with legs for easy drainage. It needs supports for printing. I'm using normal supports. The second one is without legs, for ease of printing. I also created a tray for these pots. For 6 or 1, if you need it. Line width…
Cool and simple 3D print to allow you to do some home "gardening". I would recommend printing the complex version 99% of the time! Print Settings Printer Brand: Creality Printer: K1 Rafts: No Supports: No Infill: 15% Filament: elegoo PLA…
Self-watering planter for growing seedlings. Modify the capillary mat according to the drawing Place the capillary mat under the planters and lay it on the grid Rockwool cubes sized 40 × 40 × 40 mm are used in the planters The water level…
These will help solve two of the biggest issues I've run into with the Kratky bucket methods. No more algae growth, print these in a black filament (or paint them) and they will sufficiently block out all light beneath them If your…
Decorative microgreens growing bowl made from WoodFil
Some growing lights are designed to grip on the side of the plant pot, but for smaller plants this is sometimes not an option, because they are too light. This is where this model comes in. It has a block to grip to and a large base to…
Where stories take root and imagination grows, this Tree Growing from Open Book sculpture captures the magic of knowledge brought to life. A detailed, twisting tree trunk rises organically from the pages of an open book, its roots…
Tetrahedron Cube Octahedron Dodecahedron Icosahedron
Tray for Pre‑Growing Seedlings in Compressed Substrate Blocks This tray is designed for efficient pre‑growing of plants using compressed substrate blocks measuring 5 × 5 × 5 cm. The overall dimensions of the tray are 22 × 23 cm. Its…
Print Settings / Nastavení tisku: Layer height: Variable (Adaptive) Infill: 5% Gyroid or Lightning Nozzle: 0.4 mm Material: PLA (Matte preferred for best results) Supports: Support-free (No supports required) Brim: yes EN: Easter Bunny…
I've seen multiple supports for young plants, but I want a cheap and quick to print utility. This is my version. The ring have a diameter of 40mm, the slot for the stick 3,5mm. I've printed this support tool with PETG because this is more…
A hydroponic growing lid designed for plant propagation, rooting cuttings, and simple water-based growing. The lid holds multiple small growing baskets above a glass, jar, or container, allowing plant stems and roots to stay supported…
90x90 mm Cress Growing Tray with Cutting Template A simple 90 × 90 mm tray for growing cress and other microgreens indoors. The model includes a matching cutting template for preparing the growing medium. The setup shown uses: Kitchen…
Insert for SPIDER FARMER Hydroponics Growing System. Print 2 Use higher % infill to reduce light.
Cap for Spider Farmer Garden pod. Cover unused pods.
sign is 130mm x 100mm 6mm thick back is 4mm text is 2 mm i changed colour for text at 4.2 mm . i used pla and 20%infill
Earlier this year I got into growing sprouts. While living in my dorm room at college, I wanted a more convenient way to strain the water from the mason jar and came up with this print. It's a meshed strainer lid for wide mouth or regular…
how to easy growing small plants and then repot without harming the plant? This is my anwser the QRP- Quick Recharge Planter The Support for 3 Planters is optional if u have another option to place your planters on. Manual: -Lay the…
Inserto oficial para el juego de mesa Growing Season (creado por Eric Rodriguez https://twitter.com/EricRod_LYV ) Inserto diseñado para albergar todos los componentes de Growing Season ordenados y seguros. Con espacio suficiente para…
Two STL files due to the brain section requiring a brim to stick to my printsheet using white PLA. Simply plug the flat bookmark into the brain. NOTE: THE BOOKMARK ONLY INSERTS ONE WAY INTO THE BRAIN SO USE PICTURES AS A REFERENCE!
Small growing pot for chili's or herbs. Small holes at the bottom ensure that there is no waterlogging. Kleiner Anzuchttopf für Chilis oder Kräuter. Kleine Löcher am Boden sorgen dafür das es keine Staunässe gibt.
Hi! Need a full color shelf that can be adapted to any space and make it grow until it fills the entire room? Is your printed bored with nothing to do?? This one may be useful for you! This is a set of pieces that you can join and make…
A basic pot with thin walls that makes it easy to get the plants out by allowing it to be squeezed together. It can be printed in PLA and PETG without support. I printed it in recycled PLA at a layer height of .3 mm, and it works like it…
Used to germinate seeds or as hydroponic pot Measures : h 4,5 cm/1,77in ; w/l 3,7cm/1,45in Fully biodegradable if printed in PLA The sides can be easily broken by you or the plant to facility the roots growing Printing: Temp : 190-200°C…
With your printer money doesn't grow on trees BUT it can GROW on your print bed. You just need 3 things. A STL file, a 3D printer and the Filament. Here is my entry to get the latter…. The money trees that are holding the coins are from…
This is to support a strawberry plant through growth. put each half around the core plant and as the strawberries start to grow they will rest on the support instead of the ground. Keeps a lot of ground-dwelling bugs off of the fruit as…
This is a set of models to grow cat grass hydroponically in a standard or wide mouth canning jar. Want to keep your new cat grass upright, despite your cat's best efforts? Check out this companion print - Base for a Canning Jar…
I made it into two pieces so that you can easily drain a tray from water without having to remove everything
Stolní organizer Print instructions Pla,Petg Výplň 15% základna verze pro tisk s tyčkou průmer 12, nebo bez tycky za pužiti ocelove nebo dřevěné o pruměru 12 mm Vše se tiskne bez podpěr pouze krabicka se zámkem za použití v druhé a dalsi…
System designed to care for plants in their growth, also to mount vines, you can support even more things, not just plants. How Start: You can start printing the starter kit to build a basic growing plant shield like you see in the next…
There are no supports needed. For greater structural rigidity, join the ends to form closed units
IPO4 (Indoor Planting Outlet) is an open source Click & Grow (TM) pods compatible system. It can replace Click & Grow garden 3/9 pods, and the parts can be used with the original Click & Grow to replace the cups, pro cups and U-shaped…
3x3x3 grid 2,5" / 5cm basket holder for hydroponic growing. Use in the nursery for seedlings and rooting before putting into the system. Possible to have water under for the roots to grow long enough for the main system. Construction is…
FRESH MICROGREENS in 7-10 days. No special lighting required, no soil required & no daily watering required. Cut hemp mats to 10" x 10"…
This sprout growing jar strainer is designed to be printed in one piece with all functions: 1 - No need to open to fill it with the water, just turn it back. 2 - After pouring, it does not drip onto the table but only into the included…
It is an organizer, that you can use for anything, but especially for plant growing
Use with a sponge nursery. Fill with nutrients and water and allow to grow in the light. I recommend making seedlings in the model below and replanting them in this model. https://www.printables.com/model/571540-hydroponics-smallest-case
My indoor garden needed a few new baskets for starting some new plants. I decided I'd like to try modelling something like this on Fusion360. A few youtube videos later, and some Trial & Error, and I had this design. I printed using pla,…
Just a simple Hydro cup, easy to print! The complete “hydro tower” can be downloaded here: https://cults3d.com/en/3d-model/home/hydroponic-tower please like and follow my designs here: https://www.instagram.com/walleriusdesign Category:…
growing tent links for 16mm rods. there is a 3 rod version and 2 rod version. print without support.
It will help you organize your seeds in a mini greenhouse. The individual fields are 40x40 mm. Category: Other
This growing pots are designed for cocos soil tabs. Print with support.
Simple Kit Card with 10cm, 6cm and mixed plant and growing plugs. Print and cut off. Label your favorite plants.
Simple kit card with plant plugs with a large writing field and holders for the seed bags. Print and cut off. Label your favorite plants.
Note: I am moving to Maker World, I don't have to time to make new uploads here too. Check it out for new models! https://makerworld.com/en/@gustav.ferdman Easy to print hydroponic basket in two parts, easy assembly. The part is printed…
With over 50 designs, there are most of the popular and useful Amiibo coins here, ready to add your NFC215 tag. These can be used on any device that supports Amiibos, from Wii U, 2DS and 3DS to Switch. Much easier to carry on the go, and…
hello friends, I'm Vlad-3d designer from Ukraine , I got this idea and I really want to implement it, first of all, this product is aimed at premium materials and I want to implement it as a final product, but I will also share the final…
Sehr stabile Version eines Hydro Tower's für 6 Pflanzen pro Modul, die Module incl. Bodenplatte werden untereinander mit Edelstahl Gewindestangen M6 verschraubt um der Konstruktion noch meht stabilität zu verleihen. Als Wasserbehälter…
You are welcome to decide the name of this print, I frankly don't have a clue. I recommend printing slowly for the best quality. Also, add painted supports to cradle the bottom and the ceiling of the middle of the part to avoid a print…
Part 2 of the geometric series. It will be a great addition to your desk, showing all the cool things 3D printers can do
It's a pot which when filled with hydroponic substrate can harbor plants inside. That's an idea that been on my mind for 2 years and I'm finally ready to post it. I'll still need to add print settings and better description, but for now,…
Growing Pot - Quick Release - Vase Mode Minimal material, maximum growth: easy-to-print growing pots in various sizes. To remove the plant, simply press the bottom slightly. My girlfriend uses these growing pots, from tiny seeds to…
Cress Farm with two trays so you can enjoy cress/sprouts nearly every day via succession planting. Note : - Farm requires 1 bottom and 2 top pieces - Use food-safe filaments - Change the water in planter regularly - Clean the farm…
