1 / 5
3 gallon bucket SIP insert for growing plants — image 1
1 / 5

3 gallon bucket SIP insert for growing plants

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Put this in the bottom of a 3 gallon bucket to make a self watering planter. designed for 1/2 gallon water reservoir

Rating
0 / 5
Likes
1
Downloads
1
Makes
0
Views
20
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Public Domain

I use this to make self watering planters out of the 3 gallon buckets I get from Lowes.   The reservoir should hold 1/2 gallon of water.

Drill a 3/8th or larger hole about a 1/2 inch below the insert in the bucket to leave an air gap between the water reservoir and the soil. 
Use a pvc pipe in the designed cutout to allow you to fill your water reservoir.   When you fill the bucket with soil the middle column will be sitting in the water reservoir and will wick water up through the bucket.

Wait till reservoir runs dry before refilling (soil will still be saturated).

I measure the water going in ( ie I use a 1/2 gallon milk container and funnel) , but you can just fill until water comes out of the drain hole if you want.

note:  I am still testing these.  While the reservoir can hold up to a 1/2 gallon i usually put about 1/3rd gallon to leave a larger air gap.  I would only use the extra capacity if i was going to be away from my grow for a few days. 

I used PETG to print.

Just made these this year so can't say how they will hold up long term.  In garage testing i liked using just perlite in the bottom wick and soil/coco above, but have not grown in it yet.

Tags