Counting matching models…
If you want to empty a barrel etc using a siphon but find it uneasy to start the siphon - this is an easy way to do so. This shaker siphon is a actually just a valve. By shaking it down into the water (or other liquid), that water can…
Kermit Sipping Tea The cup is empty so you could turn it into a Kermit Sipping Tea Key Holder.
I've added one version with a inbuilt nut and another with knurling. The internal valve should be printed with 100% infill. The included .gcode files are configured to print the valve at 100% infill, while the outer body is set to 4 walls…
This is a cupholder adapter for the owala FreeSip water bottle. I tested it in an 06 Accord, and 2012 Mustang. Fit it somewhat loose, to avoid scraping off the branding during insertion/removal.
This is a 3D printed version of the jiggle siphon - an easy way to siphon fluids without the need to first prime the tube. Simply shake the submerged jiggle siphon and fluid will start flowing through the tube. It works as long as the…
I designed this sipper after a downloaded model resulted in an in proper seal. Also it was printed with overhang which required support and was less hygienic due to the imperfections on the supported surface. So I designed this model with…
The housing consists of two parts. The cap is snap-in. The HDMI and USB-C ports are easily accessible and not recessed into the housing. The housing has a cutout that allows access to the microSD card without disassembly and holes for…
WHY Well, last weekend, I was just sittin' at my desk, writin' some code, when… **BLAM**!! Shot in the arm by my Owala water bottle button. Now it's frustrating enough that the button just shot off the water bottle, but it took me like 20…
Designed this to attach to a common garden hose so it could be used to siphon large amounts of water while preventing leaves or other debris creating a blockage in the small hose opening. In hindsight, I should have printed this in orange…
Big thanks for IconicFAB for this design i like it a lot but i'am little bit lazy so i made this drawer ;;
Garden Hose Shaker Siphon with Quick Release version 2 This practical Shaker siphon has an integrated valve that allows you to empty any container containing liquids. It is designed to be compatible with garden hoses of different sizes…
A simple tool to create a siphon using two tubes. It uses venturi effect to create a vacuum. Useful when you want to transfer liquids and you don't want / can't inhale (ex: aquarium water, fuel...). You just need to blow into the tube to…
A simple non return valve that lets you easily start a siphon with a garden hose. Male garden hose thread for easy attachment. Good for draining hot tubs, pools etc. To use, attach to the end of the hose then rapidly move the hose up and…
2parts, held together by four M3 10mm screws and nuts. no supports needed. OpenSCAD source available. New : Optional top that houses 4x4x4mm NdFeB magnets. Even half-populated it will stick to any metal case (just be aware of magnetic…
Just a simple phone holder with a little hole to pass a charging cable through. Print Settings Rafts: Doesn't Matter Supports: No Category: Mobile Phone
This is a quick and dirty stand for people who don't have the 1" shelf upright to attach the claws of the "Airbrush Holder for Paasche Siphon Feed Airbrush". This stand can sit on the table beside you and have the claws attached without…
Anti-Siphon Adapter for Freeze Dryer I use this on my Harvest Right Freeze Dryer Installation Install the adapter on the drain hose to allow defrost water to flow in one direction. When you open the valve on your drain line, air will be…
An alternative to Cirkul's $20 piece of plastic, this print allows you to store, protect, and dry the flavor cartridges for your favorite water bottle, without sealing all the moisture along with it. Designed with special draining…
Ensures that no more liquid than necessary comes out of the conveniently fillable wide-neck bottles.
It's a holder for Cirkul Sips. I also made a drip tray that the bags can slot into so you can keep track of which sip is which flavor. The sip holder just sits inside the drip tray. I would recommend printing with PETG, or sealing the…
We reccomend print at .16 layerheight, 3 perimeters, 3 top/bottom layers, with infill set around 10% (adaptive cubic-faster print).
Mississippi, USA (MS) Topographic Relief Map with Rivers and Coastal Waters Mississippi, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
Kermit Sipping Tea -remixed without the hand and some small retouche :D STL version
Siphon liquid detergent tray for washer Two tray dimensions Normal Short/wide See Narrow tray for Blender file for easy modification to fit your washing machine. Printing No supports needed. Print backside down as shown below Example…
A remix of self starting siphon by dougfeig. This version is smaller and easier to print: 60° overhangs don't need support Triangular section assures a better adhesion on printer's bed Wall size optimized for 0.4 nozzle Have fun!
Expands a 1 1/4 inch syphon fitting to an 1 1/2 inch syphon. Used to connect a 50mm siphon to a sink with a smaller thread.
This is a replacement water bottle button for the Owala FreeSip Sway. The button uses a different mechanism to stay in place than the original FreeSip. Compatible with the lock feature of the bottle lid. For strength, I recommend printing…
Do you want a unique and stylish collar that reflects your personality? Sipikes is the perfect solution. With its interchangeable spikes, you can create your own custom design and change in whenever you want. Sipikes is made of…
Here's my take on a water bottle cup holder adapter, mainly for my 40oz Owala FreeSip. My 2014 Toyota Corolla's cup holders are really only designed for cans an cups with a tapered bottoms. Anything with a thick bottom won't fit, so here…
This is for carrying on a motorcycle. It's flow rate is rather low of course, but when one needs to transfer a bit of fuel to a friend, then it's going to be invaluable. It takes way less space than a spare fuel container. I drilled and…
To print at 150-200%, full size is 140mm long. Cabin roof to print separately and glue on the boat.
My friend Julian from Instagram created a nominated and winning ai-generated image for the contest "My Girl with a Pearl" from the Mauritshuis Museum in The Hague/Netherlands. You should definitely check out his Instagram:…
Dieser Aufsatz passt auf den Geräteabfluss/Anschluss an einem Handelsüblichen Siphon. Der Abflussschlauch vom Dreame, für den Festwasseranschluss, passt exakt in die Öffnung. Mit etwas kraft reindrücken, aber aufpassen das man den…
Plug an aquarium airline hose in the marked holes. (inner: 4~5mm, outer: 6mm) Put a hose marked as 💧 in the tank, and blow a hose marked as ≈. (You might need to blow it really hard) Lower the siphon's drain hole from the tank's water…
Recommend printing with 4 perimeters. Examples were printed in PETG (matte black) and Pro PCTG (purple) with 0.20 mm layer height. Snug supports work well. Suggest orienting the part right-side up (opposite from model file orientation).
Quería montar un Equipo Informático de Productividad en mi zona de estudio ( para ofimática y navegación Web) que a la vez que fuera eficiente energéticamente tuviera suficiente potencia y no se quede corto a medio plazo, además debía…
Place the side with rounded edges at the end and there is no need for any supports. The model requires 15% infill. REDIT: I have tested it for a week and even after hours of keeping the LED light on, it remains relatively cool.
I designed this model to drain my pool by gravity. My pool has a size of 300 cm * 200 cm * 75 cm. It will take some time, but just leave it be. You need a garden hose where the end of the hose will be lower than the bottom of the pool,…
My friend broke the original handwheel for his SIP wood lathe and was distressed to discover from SIP that the part was unavailable. 3d printer to the rescue... I took measurements from the original wheel and made modifications to the…
I needed a very long siphon vacuum to reach the bottom of my very tall fish tanks. I had some 1 inch clear pvc and a length of siphon hose. It has a slight taper fit similar to normal PVC fittings. You may need to scale it up or down a…
PETG 0.2 mm layer height 15% infill 3 wall loops Manual tree support for clips
Print in colorFabb_XT Clear , which is FDA food contact compliant. Avoid using other liquids than water, this is to reduce exposure to bacteria.
My second approach for an easy to use and rarely to clean strainer for floor level shower drains. This time I replaced the original tube ("TECE Tauchrohr" see pictures) by an own designed one.The new tube is for the siphon-function in…
Designed this replace a couple of cups of a similar design that were just too flimsy. Instant hit with our kids and really easy to make. Print details 100% infill No supports or rafts Used PLA but probably works with other materials My…
These parts can be used to make a siphon (AKA racking cane) for winemaking. A clip holds the siphon to the top of your brewing flagon, and a cap for the bottom of the siphon prevents sucking up lees that have settled to the bottom.…
This Racking Cane Holder clips right to the side of your bucket or to a carboy! Allows you to adjust height of siphon. Will hold standard sized auto racking canes (22mm diameter). Easy to print with no supports. Designed with Fusion 360…
There are 2 versions included. “Fitter” is slightly tighter, depending on the tolerance of the printer. If you need a really tight seal, you can also print the TPU seal. Es sind 2 Versionen enthalten. “Fitter” ist etwas enger, je nach…
Airsoft mock supressor insipred by DTK 9mm. 15mm length 14mm cw thread. Printed with 0.1 height, worked well.
This is a stand for the Transformers G1 Autobot Matrix of Leadership as seen in the 1984 Transformers The Movie as well as the cartoons and comic books. The Matrix model this stand was designed for is the one by Parke Bowman which can be…
Get a grip. On your favorite water bottle that is! I designed this easily printable handle to attach to your 16 oz Owala. Simply print it in your favorite durable filament, and snap to fit the pieces. Category: Kitchen & Dining
Spare part: Odour trap for KERDI and Dallmer shower drains Siphon insert with removal function Ersatzteil: Geruchsverschluss für KERDI und Dallmer Duschrinnen Siphoneinsatz mit Entnahme-Funktion
A case to hold an ISI Cream Siphon / Whipper Print instructions Just barely fits on a bed of a mk3. Included 3mf with some custom infill modifications to use less filament if desired.
This is a replacement cup for siphon fed airbrushing. I wanted a few extra cups without spending a ton of money and I also just wanted to see if I could. There are two sizes, one standard and one large capacity. These were printed in…
reupload of the print head cover that helps with heat creep on the M5C
Airbrush siphon cup 1ml (4.7 mm pipe). 2nd item with 4.6mm pipe Print multiple siphons for the each color needed. Tip: Printing with a brim or raft allow cups stand more stable on the table Category: Art Tools
Sifon Cooler 40mm for a Supermarket-refrigerated-fruit-vegetable-open-display-cooler. Woow something for scrabble... Vegetable coolers tend to condense, i designed a 3 part sifon that would fit the existing 2 wholes on each side which fit…
Has anyone been annoyed with a non working siphon in a shower? Especially when the shower has an extra flat floor drain. This original design is sealing itself by compression inside the floor drain's circular edge. It is design as a two…
This is a simple remix of Henlor's extruder cover, optimized for SLS and SLM printing.
The 24oz Owala FreeSip claims compatibility with “most” cupholders; my van apparently doesn't fit the definition of “most”. If you also have a 2018 (or possibly any 5th gen) Honda Odyssey and don't want to just put your FreeSip in…
This mug was originally designed to quickly cool down Tea. Designed for SLM Metal 3D Printing Technology, or lost wax casting. Can be printed in pretty much any health safe metal. Thermal dissipation analisys have been conducted both for…
This case is a refined version of the original Sipeed NanoCluster Case, redesigned to support the Noctua NF-A6x25 (5V PWM) fan and to provide a more convenient opening/closing mechanism. I’ve also added a bottom access hole so you can…
Mississippi towboat inspired by pictures and dimensions of the. oat named BIG J.O. Scale 1/100, model is 384 mm long Deck0 (water level) is divided in 3 parts to be printed on a 220x220 printer. Print deck0_front and deck0_rear in standup…
File this under “kids do the darnedest things…”. We had some of the kick stands/mounts on the back of our school district IP phones go missing or get broken. There was no way to purchase replacement parts, only to replace the entire…
The origianl one is awesome, but i wanted a smaller one for "not so high" glasses. when i made it smalled i'd give me problems in the walls... so i decided to make this one which is easier to print due to the flat walls. it's a nice print…
Ich habe einen alten Waschbeckensiphon für die Waschmaschine verwendet. Der seitliche Zugang war schon geöffnet und einer der beiden Öffnungen musste verschlossen werden. Da der Schlauch der Waschmaschine nicht lang genug war, habe ich…
Da unser Metallteil durchgerostet ist und es am Sonntag keinen Ersatz gab habe ich dieses hier konstruiert. Es passt besser als das original.
This is an auto-siphon racking cane holder for attaching to a bucket. Fits 22mm diameter. I printed mine 100% infill, but play around with whatever works best for you.
Wie schon so oft, ist der Siphon undicht und natürlich passiert es am späten Abend. Bei der Demontage fällt schließlich auf das sich das Anschlussrohr bzw. der obere Kragen aufgelöst hat und einmal demontiert kriegt man es nicht mehr…
I have very young kids and my partner purchased these b.box sippy cups. The problem with my kids (which I'm sure other parents experience this too) is that they keep either loosing or breaking the sliding caps. So after the last one…
PETG 0.20mm, 100% infill, ironing top surfaces only used arcwelder - printables does not allow g-code upload with g2/g3
This is a multi-purpose bath bucket. It has 4 different curved edges to match different sizes of infants' heads (R50, R60, R70, R80) which helps rinse shampoo from their hair without getting water in their eyes. For older children, it has…
Holder for a 3/8" hose holder with an oversized clip for odd shaped carboys. Easy to print with no supports. Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No Supports: No Resolution: 0.1 Infill: 100 Filament: Inland…
Insert for 1L wide-mouth Nalgene bottles to make it easier to drink. Includes a lip along the non-drinking edge of the insert to help with removal. Print from a food-safe filament. Print with default settings without supports. Version for…
I really like my 24oz Owala Freesip water bottle, but there's one thing that's dumb: the locking mechanism that doubles as a carry loop. I want to carry my bottle by the handle while also ensuring it's locked. My models are inspired by…
Small change of the layout in the drawer base part. It is now symmetrical and there is no divider under the hole of the plate.
Meet the HairSnare: The Ultimate Drain Dragon Slayer! Tired of standing in ankle-deep water while your bath turns into an unintended spa? Enter the HairSnare —your new best friend in the battle against clogged drains and rogue hair…
A print of an American alligator (Alligator mississippiensis) skull. It takes a while to print but you should only need a few supports. I used bone white from inland to print it and it seems to work well. I have a few skulls around the…
My first contest entry. Should fit standard Mason jar. Enjoy some lightning or some iced tea without spills. Lol Lettering is offset height to allow simple layer filament stop to add color.
Neulich musste ich am Wochenende einen Siphon reinigen. Dabei ging die Dichtung kaputt. Ich habe sie kurzerhand konstruiert und mit TPU gedruckt.
I develop a splash guard that will slip onto a standard Anti-Siphen valve that attaches to your garden hose valve. Certain states/areas require an Anti-Siphen valve to be locked on your hose valve to prevent containments going back into…
Gadget to help dissipate laptop heat.
pea aphid (Acyrthosiphon pisum)) imaged by light hseet fluorescence microscopy and converted to a 3D model using FIJI (ImageJ). Autofluorescence Art works by Giedrius Stankeusvice (IADT, Dublin) using Zbrush
Print with 100% infill. Fits iBayam Journal Planner Pens: https://www.amazon.com/gp/product/B0772XSNXY/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&th=1
A Bell Siphon allows for the continuous filling and draining of a container even with a constant water inflow. It is commonly used in aquaponic systems to create an "ebb and flow" cycle. This ensures that plants receive a regular supply…
Just a fun print for anyone a fan of the emoji. Made it as a gift for someone and decided I would share it.
Siphon end for standard aquarium airline tubing (3/16" aka 5mm) in two diameters. Both options are 15 cm long and print without supports with 0.8mm walls, so they will print solid with 0.4mm nozzles regardless of infill settings. the 3cm…
This housing provides a bit more weatherprotection and ruggedness for the Fanvil intercom i10S/i10SV/i10SD SIP mini intercom. Due to the fact that there are two holes in the front for the camera and the push button it is not entirely…
Ilustración de la serie “Gossip Girl”, creada por Josh Schwartz y Stephanie Savage y basada en las novelas homónimas de Cecily von Ziegesar. La imagen está sacada de internet y pasada por HueForge. Agradecimientos a su autor. Las marcas…
As the inner part of my siphon in my shower was broken, I quickly designed a new one. The outer diameter is 85mm , the height 59mm . I printed it upside/down in PETG with some support.
Use at your own risk with attention to the fact that FDM printed items may have health concerns. Filament choice and sanitation of the printed surface are both concerns to think about! I printed in Bambu ASA at 0.16mm layers with default…
🚗 SipStamp – Volkswagen Logo Coffee Stencil Start your engines—and your espresso—with this Volkswagen-themed SipStamp ! Featuring the timeless VW logo, this coffee stencil is perfect for fans of classic Beetles, vintage vans, or anyone…
Update:19/09/2019: The Siphon starter works well... But unlike the hacked PVC one, it works too well at redirecting the water flow. The water comes out with such a force that it sprays in a large circular pattern due to the fillet in the…
Airsoft mock supressor insipred by DTK 9mm. 15mm length 14mm cw thread. Printed with 0.1 height, worked well.
Some versions of the NanoKVM come with a non-standard PCIe bracket that is too high for the mount hole. This model is based on my measurements but has the correct height. It's somewhat flexible but does not compromise the structure when…
Online equivalent boots claim to fit the 30 oz and 40 oz as well, ymmv. Only tested on the 30 ounce model. Recommend printing in TPU for flexibility.
for a perfect fit print X and Y with 102,5%
Easy to print hitch cover. Printing PETG or better No Supports Orient with face up Suggest using Brim to help with bed adhesion Can pause the print to change the color of the design
Printed original model and it was just too loose and let my Owala slip open. So I went into Tinkercad and fixed up the model. I made 3 variants just in case, but the +1mm version worked absolutely perfect for me. Uploading the others to…
A simple model that can be printed without supports. It will fit juice boxes of 200ml. The measurements of inside of this model are: 53 x 41 x 120 mm.
