1 / 7
The IPO4 indoor growing system. Replaces / Compatible with Click & Grow (TM) pods. — image 1
1 / 7

The IPO4 indoor growing system. Replaces / Compatible with Click & Grow (TM) pods.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A system to grow plants at home, using full spectrum led lamps. Replacement for Click & Grow garden. Open source.

Rating
0 / 5
Likes
28
Downloads
101
Makes
0
Views
974
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

IPO4 (Indoor Planting Outlet) is an open source Click & Grow (TM) pods compatible system. It can replace Click & Grow garden 3/9 pods, and the parts can be used with the original Click & Grow to replace the cups, pro cups and U-shaped lids.

You can print all the parts. The only additional things you need are:

1. A sun-spectrum led lamp. I recommend the SANSI 24W lamp.
2. Some 6 millimetres (¼") wicking cord.

This system can be used as a Click & Grow (TM) replacement or alternatively as a Kratky method system, see https://en.wikipedia.org/wiki/Kratky_method. If you are new, to start I suggest checking Click & Grow and just use this model likewise.

WARNING: This is still a beta project. All parts already work, but may be subject to changes as I gain experience using it.

Needed parts.

In order to use this system you need to print the following parts:

1. Base
2. Top
3. Four cups. You can choose the normal cup or the cup that has holes in order to let the root out (this improves the results with certain plants, see Click & Grow (TM) pro cups information to know more).
4. Four U-shaped lids. This is useful in order to prevent weed, mushrooms and other unwanted stuff to grow near our plants.
5. The float, that is this flower-shaped part that you use to put water inside the system. Just put the water on top of it, till it is at the same level with the top part. Every time there is too little water in the system, the float will be lower, signaling you to add more water until it reaches the top cover level again.

You need to put the wicking cord in the cups like in the picture: this is the way the plants will receive water, since the wicking cord will carry water from the base to the cups every time the soil inside the cups is dry enough.

For the pods with “smart soil” and the seeds, just check the pods by Click & Grow (TM). They are around 9 euros/dollars per three plants. There is no need to add fertilizer of any kind, the system just needs water since the pods contain already all the elements for the whole lifetime of the plant.

Note that germination and initial growth are improved if you add transparent grow domes initially. They are small (40 millimetre more or less) transparent covers that will create an ideal environment. When the plants will reach the domes, remove them.


Lamp

We suggest SANSI 24w or some other similar led lamp. Download some application in your phone that is able to estimate the light in lux, then put the lamp at the distance that allows your plants to receive around 30000 / 40000 lux. As the plants grow, you have to reseat the lamp higher. Using a articulating table lamp is perfect for this setup, if you got one. However note that the lamps sometimes weight quite a bit, so make sure the arm is able to sustain it.

Printing hints

The top and the cups are better printed with organic (tree) supports in Prusa Slicer. I added Prusa Slicers files other than STL files. Just make sure to change them for your printer, nozzle size and material.

In order for it to be water tight, I suggest printing the base with four perimeters or more, in PETG. I used transparent PETG so that I can see the level of the water. Other parts could be printed in PLA without too many issues. PLA in theory is biodegradable and not waterproof, but in practice it takes a LONG time in order to have issues because of cold water (warm water is another story).

License

This model is open source. Do whatever you want with it.

Tags