Search results: hydroponics

Lid for Hydroponics Tower

The lid is 36.9mm by 56.9mm for a tower I bought off of amazon. It has a lip and should fit snugly. This was my first attempt at 3d modeling for 3dprinting so it's far from perfect!

Vertical Hydroponics System (VHS)

Description Experimental vertical hydroponics system I have designed for growing Herbs indoors. Things you will need for the assembly: M5x40 button head cap screws (x18) M5 nuts (x18) M8 threaded bar (730mm minimum) M8 nuts (x8) M8…

Modular Hydroponics Tower - Threaded Bucket Lid Adapter - extendend for Sortera (hole nedeed)

Estensione della vite, lo utilizzo per rendere più resistente l'idroponica usando il vaso sortera per infilarlo dentro il sostegno https://www.printables.com/model/1478576-stutzrohr-hydrotower-sortera-60l Il sostegno di cui sopra dovrà…

Hydroponics Tower (Integrated Tube)

The remixed files here are what I used in my setup -- based on Modular Hydroponics Tower w/ Grow Lights , together with the Lowes 5-gallon bucket lid . I also have a remix of the led arms which I will upload later.

hydroponics garden v1.1

Hydroponics Garden v1.1 is a compact and modular hydroponic growing system designed for indoor use. It is ideal for growing herbs, lettuce, and other leafy greens using minimal water and no soil. The design is optimized for 3D printing…

Hydroponics Tower Pot

Edit: I found that one of my prints developed a leak between the printed layers. I am not sure if using a .6 would fix that or not, or changing wall thickness. I added a lid that fits an ice cream bucket from an ice cream shop. It works…

Dispenser module no clog - Modular rotating hydroponics tower

My hydroponics towers are on a rotating base plate . Rotate In order to keep the dispenser working AND keep the tower free to rotate the feed hose has to be free of the dispenser. So I removed the hosebarb and center and stuck the hose…

Low profile lid - Modular rotating hydroponics tower

Kratky Hydroponics Blackout Sleeve for 32oz Mason Jar

This is a blackout sleeve and cover for 32oz mason jars, for use with Kratky hydroponics. The sleeve blocks light to prevent algea growth. The sleeve fits loosely so the plant can be lifted out to check nutrient levels easily. The cover…

Hydroponics growing system plant support

Used pla layer height 0.2 infill 15%

Sterilite Tote Handle Plug for Kratky Hydroponics

Using the container for a Kratky setup. I wanted to put more nutrient solution in the container but the holes prevented that so these are plugs for the holes. Specifically for these Sterilite Stacker Totes, I use the 4 gallon version but…

Hydroponics water garden with top water feature

This “Hydroponics” planter with water feature is designed to allow users to print multiple sections to make a planter with a water feature as tall as you'd like. The only thing you'll need outside the printed parts is some filter…

Hydroponics growing system Supporting plant

Support system for plants from the stem of the lamp. Stem of lamp was arround 15.4mm so can fit many diffrent models Used infill 15%

hydroponics 3 way tower added supports for distributor plate & slimmed

This requires less material (but is still strong). The added notches at the top so that one can add a distributor disc to better focus how the water hits the plants below. (Uploaded model was a test article, I haven't yet fully explored…

hydroponics system for plants

This is a hybrid design that can be used both with and without water in the bottom container if water is placed there the plant roots will travel down to the water making manual watering less frequent but this model can also be used as a…

Barrina Grow light adaptors for hydroponics tower

printed out of petg 25% infill with 3 perimeters .15 structural I designed a solution to hold those specific amazon led lights for the hydroponics tower maybe it could work for other lights as well

Hydroponics tower dispensor with holes

i found the file for the dispensor with holes. Happy growing!

Screw-on Kratky hydroponics cube holder for mason jar

My original Kratky model used canning lids that are made of metal. After a few uses they tend to rust. Luckily I found a regular mouth jar lid here on printables and modified it to add the rockwool cube holder.

Glare Light Shade Screen, practical for Welding Hydroponics Aerogarden or other uses

[Glare Screen] useful for Welding, Fish Tanks, Aerogarden, Hydroponics, Photography Flash… you can create a simple lightweight universal glare screen blocking 99% of light from a particular strong source. for example me: i have two…

Plant pot / net cup for hydroponics (height adjustable)

A height adjustable hydroponics plant pot made with 3d printing in mind. I made this design mainly because net cups made for hydroponics where I live are fairly expensive and they don't allow me to use whatever media I want due to the…

3/4" PVC Pipe Clamp Support for Dutch Bucket Hydroponics

This is meant to easily attach a ¾ inch PVC pipe as a feeder line for Hydroponic Dutch Bucket System that use a 5 gallon bucket with a lid. How to use: Drill a 7/8 inch hole in the top of the bucket lid. Place Clamp Support in hole Drill…

Gardyn Hydroponics ySleeve

Tend to your Gardyn hydroponics plants without spilling water all over the place. This ySleeve will hold your yPod while it is out of the system for harvesting or plant maintenance. It has cutouts on the sides to make it easy to remove…

Propagation plate for Hydroponics

This plate can be used to grow cuttings as hydroponics. Simply place them on a jar or something similar. That way the leafs don't touch the water and can't rot easily. The top has a conical shape so water is able to drain into the jar. It…

Auto pot selfwater with quick bottle fix hydro hydroponics

Поддон гидропоника с автополивом с возможностью горячей замены бутылки без выкручивания и переворачивания горшка Возможность регулировки уровня. Внимание подходят не все бутылки большие а только плотные (из под минералки) - их НЕ должно…

organic netpot for hydroponics

Hydroponics netpot for holes of size 64mm Category: Outdoor & Garden

Water Bottle Cap With 5mm Hole for Mycodo Hydroponics System

Water bottle cap with 5mm hole to fit 5mm tubing that draws nutrients from the water bottle using a peristaltic pump.

Wall hanged Hydroponics system

The thought is that screws are screwed in a wall, or a wall hanged plywood board, where the shell can then be hanged unto the screws in series so that the water can be pumped up to the top planter. I've tried and designed it so that it…

Hydroponics Tower

This model is entirely modular, so all parts fit together seamlessly. Other hardware (water pump, timer, 3/8" tubing, and a pond (I used a bucket, but if you want fish, maybe look into a larger pond)) is not included, so some additional…

Tiny Hydroponics Tower

A pretty useless tiny tower used as an instructional video for Tinkercad. It's in the kitchen with mint gorwing in it and my wife loves it lol. Glue the rain plate to the lid and push ¼" pipe in to the hole from your tiny pump. Print with…

Widemouth barrel lid incl module adapter for hydroponics / Weithalsfass Deckel mit Adapter für hydroponics

I tried hydroponics last year and failed miserably :D This year I give it a second try. I bought one of those widemouth barrels as a base for the tower. There is already one lid available here for those barrels, but the one I bought has a…

Hydroponics End Plates FloPlast 65mm Square Pipe

End plates to fit 65mm FloPlast square guttering, These are designed for a tight push fit onto the pipe. I applied a small amount of LSX to make them water tight to the pipe. Its designed for normal 13mm garden hose with a tight push fit…

Hydroponics: 90mm endcap for Veranda vinyl post

This model is for use with Veranda 4x4" by 8' vinyl-sleeved pine posts. I removed the post (reuse for other project) and kept the sleeve to be used as a hydroponic channel. Bought these when they were on sale:…

Hydroponics Module 4-way NOT hollow; has diffuser

I wanted a 4 way planting module with the water diffuser, but the model wasn't in the original files, so I just split and merged two modules. Enjoy

RAKO Hydroponics - Basket for paper cups

A basket for the Hydroponics system in a RAKO box

Hydroponics Tower Nursery Starter Cup Holder

When you first start your hydroponics tower you can start the seeds, minimal watering, and no nutrients. But once you're plants start to grow you need adjusted PH, nutrients, and more water flow. Because of this you should not start new…

Hydroponics: channel supports for 90mm Veranda post sleeve

These fit come in a single channel or double channel (pictured) variety, and can be used to keep a hydroponic NFT channel at the right pitch (in this case a 90mm pvc sleeve from Veranda that you can find at Home Depot). I used…

Dowel Holder for 7/8" Dowels - Hydroponics

I made these for a place for my vine plants to grow up. These use the poplar 7/8 rods you can find at any home store. I had these on hand so that is why I used this size. They also just make a super stout place to tie stuff to. I was…

A+B Hydroponics Plant Food Holder

Fairly simple: It's a single container for 2x100mL hydroponics “Plant Food" bottles (of type A and type B.) Model started as a way to hold the bottles that came with the MUFGA SP0L016 4-pod hydroponics system, but it should fit any other…

Vertical/hydroponics garden

The first picture shows how it might look and the second one how it looks right now. For this vertical garden you will need a 110 mm PVC tube, 73 mm hole saw and some base. Just cut the 73 mm holes in the tube in a pattern of your liking,…

Valentine Hydroponics

As I am used to eat spread in the morning, I have a lot of empty jars. For this year's valentine day I have turned one into a hydroponics pot. Through the heart you can see how much water is inside. Before starting to print be sure to…

Funnel for Modular Hydroponics Tower from Thingiverse (5712775) / Trichter für Modular Hydroponics Tower von Thingiverse (5712775)

The funnel fits on the IKEA muscovado lid and 5-gallon lid of the Modular Hydroponics Tower from Thingiverse (5712775) . Thanks and regards to Luitzor for creating the tower. Printing: Material: PETG (certainly also printable with PLA but…

Pot for water testing for Modular Hydroponics Tower by Thingiverse (5712775) / Topf zur Wasserprüfung für Modular Hydroponics Tower

Pot for water testing for Modular Hydroponics Tower from Thingiverse (5712775) . Thanks and regards to Luitzor for creating the tower. The pot can be printed multi-material or single material. How it works: Place the pot in the tower…

Lid for Hydroponics Tower

The lid is 36.9mm by 56.9mm for a tower I bought off of amazon. It has a lip and should fit snugly. This was my first attempt at 3d modeling for 3dprinting so it's far from perfect!

Modular Single Tower Hydroponics System

A complete description, assembly instructions, and expected outcomes can be found here: https://www.protocols.io/view/dzakovich-lab-3d-printed-hydroponics-system-setup-e6nvw4pw9lmk/v2 This system is the Single Tower companion of the…

Modular Double Tower Hydroponics System

A complete description, assembly instructions, and expected outcomes can be found here: https://www.protocols.io/view/dzakovich-lab-3d-printed-hydroponics-system-setup-e6nvw4pw9lmk/v2 Original Modelers: Suraj Chandramouli and Ethan Shaw…

LST ring for plant pot for Modular Hydroponics Tower from Thingiverse (5712775) / LST-Ring für Pflanztopf für Modular Hydroponics Tower

LST ring suitable for the plant pot for Modular Hydroponics Tower by Thingiverse (5712775) . The ring is attached to the bottom of the plant pot and allows you to secure your plant in 9 positions with binding wire up to 3 mm thick. Thanks…

Replaceable filter for Modular Hydroponics Tower by Tingiverse (5712775) / Wechselbarer Filter für Modular Hydroponics Tower

The Modular Hydroponics Tower by Thingiverse (5712775) is a great model, but I was bothered by the fact that I couldn't properly clean the filter, which is unfortunately permanently integrated into the model. That's why I designed this…

Modular Hydroponics Seed Starter Cup Holder

This is a cup holding tray that holds 9 cups from the Modular Hydroponics Tower that everyone loves. I wanted something that fit edge to edge in a 1020 tray to prevent light from causing algae growth in the water. This tray holds 9 cups…

Water bucket for modular hydroponics tower

The bucket can hold up to 3,5l of useable water for the hydroponic tower system. There are two versions. One with a draining siphon and one without. In order to drain the siphon version, you just have to overfill the bucket and it will…

Modular Hydroponics Tower Netcup Seeding tray - Greatly improved

This is an improvement to my previous net cup holder. It's designed to hold the net cups that you can print for the modular hydroponics tower that is very popular. This version has two main design improvements. First, I removed the legs…

Hydroponics 2 Inch Net Cup Riser

Elevates your net cup upwards to get the most out of the space inside your nutrient solution container. Works best when installed on a fence post setup. I created this with the Kratky method in mind, but could probably be used in other…

Vertical Hydroponics System (VHS)

Description Experimental vertical hydroponics system I have designed for growing Herbs indoors. Things you will need for the assembly: M5x40 button head cap screws (x18) M5 nuts (x18) M8 threaded bar (730mm minimum) M8 nuts (x8) M8…

2-Inch Foam Collar for Hydroponics LASER CUT

A simple 2-inch foam collar for hydroponic systems — replaces standard net pots. Cut from Harbor Freight anti-fatigue foam mats , each piece gently holds your plant stem in place. Works with most 2" hydroponic openings Laser cut from foam…

Hydroponics Net Cup 3 in. to 2 in. Adapter

Print and place inside a large mouth mason jar and tighten the lid.

Hydroponics Tower Growing Clip

This hydroponics tower growing clip snaps easily onto most tower tubes, giving your plants a stable support point as they grow. It prints without supports, installs in seconds, and helps preventing bending or breakage. Perfect for leafy…

Air Stone for Aquarium or Hydroponics

I made this Airstone. It works by altering small arcs, thus creating little holes. I used some 2 cent coins to weigh it down enough so it will sink to the bottom. However, you may get away with printing it at 100 % infill, as both PLA and…

Hydroponics 5 Gallon Bucket Lid for DWC Growing

These will help solve two of the biggest issues I've run into with the Kratky bucket methods. No more algae growth, print these in a black filament (or paint them) and they will sufficiently block out all light beneath them If your…

Modular Hydroponics Tower - Threaded Bucket Lid Adapter - extendend for Sortera (hole nedeed)

Estensione della vite, lo utilizzo per rendere più resistente l'idroponica usando il vaso sortera per infilarlo dentro il sostegno https://www.printables.com/model/1478576-stutzrohr-hydrotower-sortera-60l Il sostegno di cui sopra dovrà…

General Hydroponics 5 Gallon Fill Chart

This is a chart that represents the amount of liquid fertilizer to add to your 5 gallon areoponic grow tower reservoir. These values correspond to General Hydroponics Flora Grow, Bloom, and Micro Combo Fertilizer sets, in a ratio that…

Hydroponics Tower (Integrated Tube)

The remixed files here are what I used in my setup -- based on Modular Hydroponics Tower w/ Grow Lights , together with the Lowes 5-gallon bucket lid . I also have a remix of the led arms which I will upload later.

3Dponics Free Hydroponics System - split

These are the individual parts of http://www.thingiverse.com/thing:376158 , split up for smaller printers. Go to the original thing for information, instructions and feedback! Category: Outdoor & Garden

hydroponics garden v1.1

Hydroponics Garden v1.1 is a compact and modular hydroponic growing system designed for indoor use. It is ideal for growing herbs, lettuce, and other leafy greens using minimal water and no soil. The design is optimized for 3D printing…

Hydroponics Tower Pot

Edit: I found that one of my prints developed a leak between the printed layers. I am not sure if using a .6 would fix that or not, or changing wall thickness. I added a lid that fits an ice cream bucket from an ice cream shop. It works…

Hydroponics Net Pot 50mm diameter

50mm diameter, 50mm tall net pot for hydroponics

Kombucha Bottle Adapter for Hydroponics (Gravity Fed, Self-Watering)

Original model reuploaded from Thingiverse under Creative Commons Attribution-ShareAlike 4.0 (CC BY-SA 4.0) license. All credit goes to the original author, keep_on-growin . Check out their Youtube channel - it's a fantastic source of…

Mason Jar Adapter for Hydroponics (Gravity Fed, Self-Watering)

Original model reuploaded from Thingiverse under Creative Commons Attribution-ShareAlike 4.0 (CC BY-SA 4.0) license. All credit goes to the original author, keep_on-growin . Check out their Youtube channel - it's a fantastic source of…

Coke Bottle Adapter for Hydroponics (Gravity Fed, Self-Watering)

Original model reuploaded from Thingiverse under Creative Commons Attribution-ShareAlike 4.0 (CC BY-SA 4.0) license. All credit goes to the original author, keep_on-growin . Check out their Youtube channel - it's a fantastic source of…

Dispenser module no clog - Modular rotating hydroponics tower

My hydroponics towers are on a rotating base plate . Rotate In order to keep the dispenser working AND keep the tower free to rotate the feed hose has to be free of the dispenser. So I removed the hosebarb and center and stuck the hose…

Low profile lid - Modular rotating hydroponics tower

Water spreader - Modular rotating hydroponics tower

I made an improved version . Check it out here . A simple adapter for the feed hose of the hydroponics tower. Whith a rotating tower the feed hose must be free from the tower segments. With nothng to spread the water the water will run…

Ring plant support - Modular rotating hydroponics tower

Ring support for larger or hanging plants. It fits on the modular hydroponics tower system . Please note, this was printed on a large printer, 36x36cm. Lowered the original Module_Spacer_40mm to save materials.

Swivel base - Modular rotating hydroponics tower

A ball bearing base plate for the modular hydroponics tower from Blove . In my setup the towers have to be able to rotate in order to reach the plants at the other side of the tower. This base plate runs on bb balls. They are plastic and…

Tower funnel - Modular rotating hydroponics tower

This funnel collects the water that drips from the rotating tower. The water can return to the sump. For the tower to be able to swivel the water hose has to pass under the tower. Therefore a double hose adapter is in the funnel wall. See…

Bottle inserts for Kratky hydroponics

These are small plastic parts for easy growing of Kratky hydroponics plants in plastic bottles. I include three sizes: for narrow bottle throats (21.4mm inner diameter), wide bottle throats (33.4), and for big 6l bottle throats. If you…

Water spreader 2 - Modular rotating hydroponics tower

An improved adapter for the feed hose of the hydroponics tower. This is the old one. Whith a rotating tower the feed hose must be free from the tower segments. With nothng to spread the water the water will run down the side of the hose.…

PET Bottle Hydroponics Kit — Net Pot + Snap Caps for 28 mm & 38 mm Bottles (Kratky)

Grow fresh herbs on your windowsill from bottles you'd otherwise recycle. This set turns an ordinary PET drink bottle into a passive hydroponic planter using the Kratky method — you fill the bottle with nutrient solution, drop in the net…

Net Pot holder Hydroponics

I created a System that can securely hold 50mm Netpots so that your plants won't tip over. In my version it relies on a Flange that can be glued into your Plantcontainer. You need at least 2 M3x12 or longer and 2 M3 Nuts per plant but you…

Large hydroponics kratky jar lid

This is a larger version of https://www.printables.com/model/87089-mason-jar-hydroponics It's a bit larger so it fits on top of tins and other jars. This is for the Kratky method of hydroponics where the roots are partially in the air and…

Basic Hydroponics

A basic two basket hydroponics set up Category: Outdoor & Garden

Hydroponics drain system

I like to grow Chillies and and i lack outside space to grow more so i stumbled upon a video on youtube that inspired me to try hydroponics. after i watched that video i modeled something similar to what is shown in fusion 360 and tried…

Coir stake adapter for plants in semi-hydroponics

For my semi-hydroponic passion, I've welcomed plants that thrive with staking for larger leaves. Enter the challenge: using a coir stake (a PVC pipe wrapped in coconut fibers) that's a hassle to manage when it's not pot-anchored. Picture…

Rotating Modular Hydroponics garden

Rota ting Hydro ponics Tow er. Pr int pa rts wi th in ner wa lls wi th 12 0% fl ow I us ed a . 8 noz zle and t wo wa lls I n or der to ma ke the to wer rot ate y ou wi ll ne ed a swi vel ada pter on yo ur wa ter ho se. G o to yo ur lo cal…

Hydroponics Tower Upgraded Nozzles

Experimenting with two nozzle types for the hydro tower, the goal was to reduce the flow strength by mimicking a mist nozzle while retaining saturation. The pressure is not enough for it to fully mist with most pumps you would use in this…

SPIDER FARMER Hydroponics Growing System Insert Half

Insert for SPIDER FARMER Hydroponics Growing System. Print 2 Use higher % infill to reduce light.

SPIDER FARMER Hydroponics Growing System Cap

Cap for Spider Farmer Garden pod. Cover unused pods.

Mini Hydroponics

Fits the 3DPonics Planter Cup . Version 0.3.0

Hydroponics Net Cup Lid Support

This is a simple net cup lid support to stop a net cup from slipping through the lid of a plastic bucket or tote. The three holes are designed to fit wooden skewers to form a tripod shape and support the main stem. Works great for peppers…

Upgraded Modular Hydroponics Tower - AddOns

At first many thanks to Conr8r for the Upgraded Modular Hydroponics Tower . I made some addons so you can build your own tower with even more flexability. These parts are compatible with his design. I designed additional shelfs with one…

Modular Hydroponics Tower - add-ons

This is a collection of pieces I printed for the bottom module section of the hydroponic tower, plus a mounting adapter (2 parts), a filling/inspection cap and a cap for passing through the electrical cord for the pump. All the parts have…

Drip Lid for Hydroponics

A drip lid for 6" pots to allow for the water supply to reach a larger range of the growing medium. Takes a 4mm inner diameter tube, inlet is 5mm to allow for a bit of stretch. I was asked to print…

Ikea Vildapel Hydroponics Vase Insert

Disclaimer: By nature, this vase is not waterproof , you must take measures to make it waterproof (eg by using epoxy), still there is no guarantee that a vase may not leak water. Use at your own risk. I recently decided to throw out all…

hydroponics pod for Ivation seed starter

You can print with supports on its side for more strength

Hydroponics pot

Hydroponics pot. Lower part is for water and nutrienst. You can use small waterpump to pump water and nutrienst to the plant. I have used BOYU FP-100 water pump. Plant is planted to rockwool and clay granulas. There is float for…

Plant Holder for Bottle Hydroponics

This was designed for a "Weck Rundglas 60" bottle. OpenSCAD source included.

Modular Hydroponics Tower w/ Grow Lights

Intro This is a modified version of boundarycondition's Modular Hydroponic Tower Garden and some features of ghoofman's Smart IoT Modular Hydroponic Tower Garden . I finally decided to upload my remix of boundarycondition's Modular…

Ikea hydroponics air pump hose fittings

Needed a cover and a tube fitting for an air pump for my Ikea hydroponics kit. Tube size is 4mm (outer diameter 6mm). Rotate the cover 180 degrees before printing. Print tube fitting as it is and enjoy. Print instructions Category:…

Hydroponics net pot seedling starter

I'm building https://www.printables.com/model/63055-upgraded-modular-hydroponics-tower-more-compact-st and I needed something to start my seedlings so I designed this really simple box to start seedlings. To make transplanting easier, I…

Remixed Modular Hydroponics Tower

I remixed the modular tower from https://www.thingiverse.com/thing:3405964 and combined it with the improved locking ring from https://www.thingiverse.com/thing:4965368/files. For the lid to the 5 gallon Lowes bucket, I used…

Gardyn Hydroponics Cover

Printed at a .2mm layer height with TPU. Measure 35.3mm x 35.3mm x 4mm

LED Grow Lamp Holders for Hydroponics Tower

I originally added the LED arms and lights to my 5 gallon bucket with lid from here but they were really floppy. So I mixed the LED holder with the half spacer with no turn that I remixed from here. To get the lights far enough away from…