Ikea Trofast hydroponics kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ikea Trofast ebb and flow (flood and drain) hydroponics system kit
- Rating
- 4 / 5
- Likes
- 25
- Downloads
- 64
- Makes
- 1
- Views
- 1,673
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This is my ebb and flow (flood and drain) hydroponics system project made with Ikea Trofast boxes.
You have to print inlet and inlet holder, drainage and drainage holder, two nuts and two corners. Corners are used to make an angle and mounted on drainage side, so nutrient solution drain back to the reservoir via inlet. The inlet uses 12 mm hose (my pump has the same hose connector).
Everything is printed without supports, holders should be turned over to print, I used PETG plastic to print.
You have to make sure that your pump does not outpowers the drainage.
Updates:
14.04.2023 - added water level sensor holder
06.04.2023 - first published